[1] Liu K W, Yu J, Zhou X L et al. Research progress of ultra-high-temperature structural material[J]. Hot Working Technology, 45, 10-14(2016).

[2] Shao B B, Xu Y, Xu W W et al. Dynamic mechanical properties and microstructure of C/SiC composites[J]. Journal of Materials Science and Engineering, 34, 603-606, 642(2016).

[3] Li Y, Xiao P, Shi Y et al. Mechanical behavior of LSI based C/C-SiC composites subjected to flexural loadings[J]. Composites Part A: Applied Science and Manufacturing, 95, 315-324(2017).

[4] Whitlow T, Pitz J, Pierce J et al. Thermal-mechanical behavior of a SiC/SiC CMC subjected to laser heating[J]. Composite Structures, 210, 179-188(2019).

[5] Wang J, Cheng L F, Liu Y S et al. Enhanced densification and mechanical properties of carbon fiber reinforced silicon carbide matrix composites via laser machining aided chemical vapor infiltration[J]. Ceramics International, 43, 11538-11541(2017).

[6] Glass D. Ceramic matrix composite (CMC) thermal protection systems (TPS) and hot structures for hypersonic vehicles. [C]//15th AIAA International Space Planes and Hypersonic Systems and Technologies Conference, Dayton, Ohio. Reston, Virigina: AIAA, 1-36(2008).

[7] Gavalda Diaz O, Garcia Luna G, Liao Z R et al. The new challenges of machining ceramic matrix composites (CMCs): review of surface integrity[J]. International Journal of Machine Tools and Manufacture, 139, 24-36(2019).

[8] Luo L, Wang Y G, Liu L P et al. Ablation behavior of C/SiC composites in plasma wind tunnel[J]. Carbon, 103, 73-83(2016).

[9] Zhang Y L, Hu H, Ren J C et al. Effect of the surface microstructure of SiC inner coating on the bonding strength and ablation resistance of ZrB2-SiC coating for C/C composites[J]. Ceramics International, 42, 18657-18665(2016).

[10] Zhang L C, Peng Z Y, Guo S Q et al[J]. Advancement in CMC research on the aero-engine turbine components Aviation Maintenance & Engineering, 2016, 41-43.

[11] Wang M, Dong Z G, Zhang X Y et al[J]. Application of continuous fiber reinforced ceramic matrix composites in aeroengine Aeronautical Manufacturing Technology, 2014, 10-13.

[12] Xie W J, Qiu H P, Chen M W. Drilling process for SiCf/SiC ceramic matrix composites[J]. Aerospace Materials & Technology, 46, 50-53(2016).

[13] Gavalda Diaz O, Axinte D A, Butler-Smith P et al. On understanding the microstructure of SiC/SiC ceramic matrix composites (CMCs) after a material removal process[J]. Materials Science and Engineering: A, 743, 1-11(2019).

[14] Zhang L F, Ren C Z, Ji C H et al. Effect of fiber orientations on surface grinding process of unidirectional C/SiC composites[J]. Applied Surface Science, 366, 424-431(2016).

[15] Feng P F, Wang J J, Zhang J F et al. Drilling induced tearing defects in rotary ultrasonic machining of C/SiC composites[J]. Ceramics International, 43, 791-799(2017).

[16] Ding K, Fu Y C, Su H H et al. Experimental study on ultrasonic assisted grinding of C/SiC composites[J]. Key Engineering Materials, 620, 128-133(2014).

[17] Wang J J, Zhang J F, Feng P F. Effects of tool vibration on fiber fracture in rotary ultrasonic machining of C/SiC ceramic matrix composites[J]. Composites Part B: Engineering, 129, 233-242(2017).

[18] Zhang W W, Zhang T R, Jiao J[J]. Comment on ceramic matrix composites machining processes Aeronautical Manufacturing Technology, 2014, 45-49.

[19] Jiao J, Wang Y, Qiu H P et al[J]. Morphology analysis of SiCf/SiC ceramic matrix composites machining surface with different processing technology Aeronautical Manufacturing Technology, 2014, 89-92.

[20] Wang C, Li K N, Chen H et al[J]. Research progress of processing technology for fiber reinforced ceramic matrix composites Aeronautical Manufacturing Technology, 2016, 55-60.

[21] Wei C J, Zhao L, Hu D J et al. Electrical discharge machining of ceramic matrix composites with ceramic fiber reinforcements[J]. The International Journal of Advanced Manufacturing Technology, 64, 187-194(2013).

[22] Cao X W, Zhang L, Yu Y S et al. Application of micro-optical components fabricated with femtosecond laser[J]. Chinese Journal of Lasers, 44, 0102004(2017).

[23] Zhang Y J, Song H Y, Liu H Y et al. Fabrication of millimeter-scaled holes by femtosecond laser filamentation[J]. Chinese Journal of Lasers, 44, 0402012(2017).

[24] Erdenechimeg K, Jeong H I, Lee C M. A study on the laser-assisted machining of carbon fiber reinforced silicon carbide[J]. Materials, 12, 2061(2019).

[25] Li J, Wang W J, Mei X S et al. Artificial compound eyes prepared by a combination of air-assisted deformation, modified laser swelling, and controlled crystal growth[J]. ACS Nano, 13, 114-124(2019).

[26] Wang F C, Dong X, Wang K D et al. Laser-induced nitrogen-doped hierarchically porous graphene for advanced electrochemical energy storage[J]. Carbon, 150, 396-407(2019).

[27] Zhang R H. Machining technology and properties investigation of SiC/SiC composites by ultra-short pulse laser[D]. Beijing: University of Chinese Academy of Sciences, 1-12(2016).

[28] Wu E Q, Shi Y F, Li M H et al. In-plane thermal conduction of woven carbon fiber reinforced polymers[J]. Chinese Journal of Lasers, 43, 0703004(2016).

[29] Appleby M P, Zhu D M, Morscher G N. Mechanical properties and real-time damage evaluations of environmental barrier coated SiC/SiC CMCs subjected to tensile loading under thermal gradients[J]. Surface and Coatings Technology, 284, 318-326(2015).

[30] Zhai Z Y, Wang W J, Zhao J et al. Influence of surface morphology on processing of C/SiC composites via femtosecond laser[J]. Composites Part A: Applied Science and Manufacturing, 102, 117-125(2017).

[31] Takahashi K, Tsukamoto M, Masuno S et al. Heat conduction analysis of laser CFRP processing with IR and UV laser light[J]. Composites Part A: Applied Science and Manufacturing, 84, 114-122(2016).

[32] Zhai Z Y, Wei C, Zhang Y C et al. Investigations on the oxidation phenomenon of SiC/SiC fabricated by high repetition frequency femtosecond laser[J]. Applied Surface Science, 502, 144131(2020).

[33] Salama A, Li L, Mativenga P et al. High-power picosecond laser drilling/machining of carbon fibre-reinforced polymer (CFRP) composites[J]. Applied Physics A, 122, 73(2016).

[34] Salama A, Li L, Mativenga P et al. TEA CO2 laser machining of CFRP composite[J]. Applied Physics A, 122, 497(2016).

[35] Liu Y C, Wu C W, Huang Y H et al. Interlaminar damage of carbon fiber reinforced polymer composite laminate under continuous wave laser irradiation[J]. Optics and Lasers in Engineering, 88, 91-101(2017).

[36] Luan X G, Yuan J, Wang J Q et al. Laser ablation behavior of Cf/SiHfBCN ceramic matrix composites[J]. Journal of the European Ceramic Society, 36, 3761-3768(2016).

[37] Pan S N, Li Q Y, Xian Z K et al. The effects of laser parameters and the ablation mechanism in laser ablation of C/SiC composite[J]. Materials, 12, 3076(2019).

[38] Marimuthu S, Dunleavey J, Liu Y et al. Characteristics of hole formation during laser drilling of SiC reinforced aluminium metal matrix composites[J]. Journal of Materials Processing Technology, 271, 554-567(2019).

[39] Wu M L, Ren C Z, Xu H Z. Comparative study of micro topography on laser ablated C/SiC surfaces with typical uni-directional fibre ending orientations[J]. Ceramics International, 42, 7929-7942(2016).

[40] Hejjaji A, Singh D, Kubher S et al. Machining damage in FRPs: laser versus conventional drilling[J]. Composites Part A: Applied Science and Manufacturing, 82, 42-52(2016).

[41] Wu M L, Ren C Z, Xu H Z. On the wettability diversity of C/SiC surface: comparison of the ground C/SiC surface and ablated C/SiC surface from three aspects[J]. Applied Surface Science, 385, 391-399(2016).

[42] Dang X L, Yin X W, Fan X M et al. Microstructural evolution of carbon fiber reinforced SiC-based matrix composites during laser ablation process[J]. Journal of Materials Science & Technology, 35, 2919-2925(2019).

[43] Guo T Y, Zhang L M, Ren Y Y et al. Surface characteristics of CaF2 crystal ablated by femtosecond laser[J]. Acta Optica Sinica, 39, 0126017(2019).

[44] Cai M, Zhang X B, Zhang W et al[J]. Study on quality of holes in SiC/SiC composites with nanosecond laser and picosecond laser drilling Aeronautical Manufacturing Technology, 2016, 52-55.

[45] Liu Y S, Wang C H, Li W N et al. Effect of energy density and feeding speed on micro-hole drilling in C/SiC composites by picosecond laser[J]. Journal of Materials Processing Technology, 214, 3131-3140(2014).

[46] Moreno P, Méndez C, García A et al. Femtosecond laser ablation of carbon reinforced polymers[J]. Applied Surface Science, 252, 4110-4119(2006).

[47] Zhai Z Y, Wang W J, Mei X S et al. Effect of the surface microstructure ablated by femtosecond laser on the bonding strength of EBCs for SiC/SiC composites[J]. Optics Communications, 424, 137-144(2018).

[48] Herzog D, Schmidt-Lehr M, Oberlander M et al. Laser cutting of carbon fibre reinforced plastics of high thickness[J]. Materials & Design, 92, 742-749(2016).

[49] Wang J T, Ma Y Z, Liu Y W et al. Experimental investigation on laser ablation of C/SiC composites subjected to supersonic airflow[J]. Optics & Laser Technology, 113, 399-406(2019).

[50] Nasiri N A, Patra N, Ni N et al. Oxidation behaviour of SiC/SiC ceramic matrix composites in air[J]. Journal of the European Ceramic Society, 36, 3293-3302(2016).

[51] Kang B, Woo Kim G, Yang M Y et al. A study on the effect of ultrasonic vibration in nanosecond laser machining[J]. Optics and Lasers in Engineering, 50, 1817-1822(2012).

[52] Ho C C, Tseng G R, Chang Y J et al. Laser percussion drilling of highly reflective metals with external interdigital electrodes[J]. Precision Engineering, 43, 43-51(2016).

[53] Lu Y, Sun G F, Wen D P et al. Effects of applying electric and magnetic fields on laser drilling[J]. The International Journal of Advanced Manufacturing Technology, 84, 2293-2300(2016).