Chinese Journal of Lasers, Volume. 50, Issue 16, 1602201(2023)

High Temperature In-Situ Observation of High-Power Laser Induced Instantaneous Damage Behavior in High-Speed Wind Tunnel

Te Ma1,2, Jiangtao Wang1,2, Wu Yuan1,2,3, Hongwei Song1,2,3、*, and Ruixing Wang1,2
Author Affiliations
  • 1Key Laboratory for Mechanics in Fluid Solid Coupling Systems, Institute of Mechanics, Chinese Academy of Sciences, Beijing 100190, China
  • 2School of Engineering Science, University of Chinese Academy of Sciences, Beijing 100049, China
  • 3State Key Laboratory of High Temperature Gas Dynamics, Institute of Mechanics, Chinese Academy of Sciences,Beijing 100190, China
  • show less
    References(25)

    [1] Zhao W N, Ma T, Song H W et al. Effects of tangential supersonic airflow on the laser ablation of laminated CFRP[J]. Journal of Materials Research and Technology, 14, 1985-1997(2021).

    [2] Chen M S, Jiang H M, Jiao L G et al. Laser irradiation effects on glass fiber composite subjected to tangential gas flow[J]. High Power Laser and Particle Beams, 25, 1075-1080(2013).

    [3] Peng G L, Zhang X H, Gao Y J et al. Influence of plume on transmittivity during laser irradiating carbon/epoxy composites in gas flow[J]. Chinese Journal of Lasers, 42, 0206004(2015).

    [4] Fan X M, Yin X W, Cao X Y et al. Improvement of the mechanical and thermophysical properties of C/SiC composites fabricated by liquid silicon infiltration[J]. Composites Science and Technology, 115, 21-27(2015).

    [5] Tong Y G, Bai S X, Hu Y L et al. Laser ablation resistance and mechanism of Si-Zr alloyed melt infiltrated C/C-SiC composite[J]. Ceramics International, 44, 3692-3698(2018).

    [6] Wang J T, Ma Y Z, Song H W et al. Experimental investigation on laser ablation of C/SiC composites subjected to supersonic airflow[J]. Optics & Laser Technology, 113, 399-406(2019).

    [7] Allheily V, Lacroix F, Eichhorn A et al. An experimental method to assess the thermo-mechanical damage of CFRP subjected to a highly energetic 1.07 μm-wavelength laser irradiation[J]. Composites Part B: Engineering, 92, 326-331(2016).

    [8] Li X, Hou W T, Han B et al. Thermal response during volumetric ablation of carbon fiber composites under a high intensity continuous laser irradiation[J]. Surfaces and Interfaces, 23, 101032(2021).

    [9] Deng Z C, Liu J D, Wang X et al. Growth characteristics of Ag nanocrystalline thin films prepared by pulsed laser ablation in vacuum[J]. Chinese Journal of Lasers, 46, 0903003(2019).

    [10] Lin J J, Ming R, Li X K et al. Study on morphology characteristics of femtosecond laser-ablated face gear materials[J]. Chinese Journal of Lasers, 48, 1402017(2021).

    [11] Huang Y G, Liu S B, Long L C et al. Observation on the process of continuous-wave Nd∶YAG laser ablation on carbon fiber composite material[J]. Chinese Journal of Lasers, 35, 2042-2046(2008).

    [12] Sun X Y, Zhang W, Hu S F et al. Methodology of dynamic ablation test for insulation material[J]. Journal of Propulsion Technology, 32, 597-600(2011).

    [13] Qu Z, Wang X, Tang Y L et al. In situ visualization measurement of flat plate ablation in high-temperature gas flow[J]. Journal of Applied Mechanics, 85, 061006(2018).

    [14] Sakai T, Nakazawa H, Dantsuka Y et al. Dual-component sensor design for in situ ablation measurement[J]. Journal of Thermophysics and Heat Transfer, 31, 307-317(2016).

    [15] Martin H T, Cortopassi A C, Kuo K K. Assessment of the performance of ablative insulators under realistic solid rocket motor operating conditions[J]. International Journal of Energetic Materials and Chemical Propulsion, 16, 1-22(2017).

    [16] Gangireddy S, Karlsdottir S N, Norton S J et al. In situ microscopy observation of liquid flow, zirconia growth, and CO bubble formation during high temperature oxidation of zirconium diboride-silicon carbide[J]. Journal of the European Ceramic Society, 30, 2365-2374(2010).

    [17] Fang X F, Qu Z, Zhang C X et al. In-situ testing of surface evolution of SiC during thermal ablation: mechanisms of formation, flowing and growth of liquid silica beads[J]. Ceramics International, 43, 7040-7047(2017).

    [18] Tang Y L, Zhang J S, Yun M K et al. High-frequency flashing of light source for synchronous measurement of temperature and deformation at elevated temperature[J]. Optics and Lasers in Engineering, 137, 106361(2021).

    [19] Wang F B, Sun Z L. Brightness characteristics and fractal dimension of spot ablated by femtosecond laser[J]. Laser & Optoelectronics Progress, 58, 2432001(2021).

    [20] Guan F, Wang R. Research on moving object detection based on Horn-Schunck optical flow algorithm[J]. Instrumentation Technology, 43-45(2015).

    [21] Thielicke W, Stamhuis E J. PIVlab-towards user-friendly, affordable and accurate digital particle image velocimetry in MATLAB[J]. Journal of Open Research Software, 2, 1-10(2014).

    [22] Johnson R L, O’Keefe J D. Laser burnthrough time reduction due to tangential airflow: an interpolation formula[J]. AIAA Journal, 12, 1106-1109(1974).

    [23] Huang H M, Du S Y, Wu L Z et al. Analysis of the ablation of C/C composites[J]. Acta Materiae Compositae Sinica, 18, 76-80(2001).

    [24] Wang J T, Ma T, Wang Z et al. Three-dimensional flow structures and heat transfer characteristics of compressible flow over a cylindrical cavity[J]. Aerospace Science and Technology, 122, 107408(2022).

    [25] Wang Z, Wang J T, Song H W et al. Laser ablation behavior of C/SiC composites subjected to transverse hypersonic airflow[J]. Corrosion Science, 183, 109345(2021).

    Tools

    Get Citation

    Copy Citation Text

    Te Ma, Jiangtao Wang, Wu Yuan, Hongwei Song, Ruixing Wang. High Temperature In-Situ Observation of High-Power Laser Induced Instantaneous Damage Behavior in High-Speed Wind Tunnel[J]. Chinese Journal of Lasers, 2023, 50(16): 1602201

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category: Laser Surface Machining

    Received: Oct. 17, 2022

    Accepted: Nov. 28, 2022

    Published Online: Jul. 31, 2023

    The Author Email: Hongwei Song (songhw@imech.ac.cn)

    DOI:10.3788/CJL221334

    Topics