[1] [1] SHEN S C, PAN C T, WANG Y R, et al.. Fabrication of integrated nozzle plates for inkjet print head using microinjection process ［J］．Sensors and Actuators A, 2006, 127, 241-247.

[2] [2] VOLKER P, ERIC G, STEFAN G, et al.. Micro-injection moulding for the manufacturing of medical devices ［J］. Medical Device Manufacturing & Technology, 2006, 25-27.

[3] [3] XU ZH, WANG J ZH, YANG D, et al.. Effect of assistant solvent on in-mold bonding of PMMA microfluidic chips ［J］. Opt. Precision Eng., 2012, 20(2): 321-328. (in Chinese)

[4] [4] ZHAO X H, BAO J F, DU Y J, et al.. Application of MEMS technology in passive THz-device［J］. Transducer and Microsystem Technologies, 2011, 30(7): 5-9. (in Chinese)

[5] [5] DAI J, SHI G CH．Study on micro-gears' error of LIGA processing ［J］. Journal of Detection＆Control, 2010, 32(4): 59-64 .(in Chinese)

[6] [6] DU L Q, MO SH P, ZHANG Y SH, et al.. Fabrication of 3D metal microstructure based on UV-LIGA and micro-EDM technology ［J］. Opt. Precision Eng., 2010, 18(2): 363-368.(in Chinese)

[7] [7] HU Y Y, ZHU D, LI H S, et al.. Fabrication of micro-ECM electrode array by combining UV- LIGA with micro electro-discharge machining［J］. Journal of Southeast University(Natural Science Edition), 2010, 40(1): 106-110.(in Chinese)

[8] [8] RUZZU A, MATTHIS B. Swelling of PMMA-structures in aqueous solutions and room temperature Ni-electroforming ［J］. Microsystem Technologies, 2002, 8, 116-119.

[9] [9] DU L Q, ZHU SH M, YU L CH, et al.. Effect of post exposure bake temperature on thermal swelling of SU-8 photoresist［J］．Opt. Precision Eng., 2008, 16(3): 500-504. (in Chinese)

[10] [10] CUI F, JING X M, ZHAO X L, et al.. Techniques for remove of SU-8 photoresist mold ［J］. Microfabrication Technology, 2007, (1): 1-6. (in Chinese)