[1] Xiong J, Xue Y G, Chen H et al. Status and development prospects of forming control technology in arc-based additive manufacturing[J]. Electric Welding Machine, 45, 45-50(2015).

[2] Xiong J T, Geng H B, Lin X et al[J]. Research status of wire and arc additive manufacture and its application in aeronautical manufacturing Aeronautical Manufacturing Technology, 2015, 80-85.

[3] Spencer D, Dickens M, Wykes M. Rapid prototyping of metal parts by three-dimensional welding[J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 212, 175-182(1998).

[4] Yan X, Gu P. A review of rapid prototyping technologies and systems[J]. Computer-Aided Design, 28, 307-318(1996). http://www.sciencedirect.com/science/article/pii/0010448595000356

[5] Clark D, Bache M R, Whittaker M T. Shaped metal deposition of a nickel alloy for aeroengine applications[J]. Journal of Materials Processing Technology, 203, 439-448(2008). http://www.sciencedirect.com/science/article/pii/S0924013607009788

[6] Skiba T. Baufeld B, van der Biest O. Microstructure and mechanical properties of stainless steel component manufactured by shaped metal deposition[J]. ISIJ International, 49, 1588-1591(2009).

[7] Skiba T. Baufeld B, van der Biest O. Shaped metal deposition of 300M steel[J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 225, 831-839(2011).

[8] Luo Y, Zhu L, Han J T et al. Analysis on the characteristics of metal droplet transferred by projected transfer mode in wire+arc additive manufacturing process[J]. Journal of Mechanical Engineering, 55, 219-225(2019).

[9] Thompson S M, Bian L K, Shamsaei N et al. An overview of direct laser deposition for additive manufacturing; part I: transport phenomena, modeling and diagnostics[J]. Additive Manufacturing, 8, 36-62(2015). http://www.sciencedirect.com/science/article/pii/S2214860415000317

[10] Panda S K, Padhee S, Sood A K et al. Optimization of fused deposition modelling (FDM) process parameters using bacterial foraging technique[J]. Intelligent Information Management, 1, 89-97(2009).

[11] Adeyemi A, Akinlabi E T, Mahamood R M. Powder bed based laser additive manufacturing process of stainless steel: a review[J]. Materials Today: Proceedings, 5, 18510-18517(2018).

[12] Sankaré S. Microstructure and mechanical behavior of laser additive manufactured AISI 316 stainless steel stringers[J]. Materials & Design, 55, 526-532(2014). http://www.sciencedirect.com/science/article/pii/S0261306913009436

[13] Chen H Y, Gu D D, Gu R H et al. Microstructure evolution and mechanical properties of 5CrNi4Mo die steel parts by selective laser melting additive manufacturing[J]. Chinese Journal of Lasers, 43, 0203003(2016).

[14] Liu Z W, Cheng X, Li J et al. Heat-processing technology for laser additive manufacturing of 05Cr15Ni5Cu4Nb precipitation-hardening stainless steels[J]. Chinese Journal of Lasers, 44, 0602010(2017).

[15] Xu X, Mi G Y, Luo Y Q et al. Morphologies, microstructures, and mechanical properties of samples produced using laser metal deposition with 316L stainless steel wire[J]. Optics and Lasers in Engineering, 94, 1-11(2017). http://www.sciencedirect.com/science/article/pii/S014381661730177X

[16] Näsström J, Brückner F. Kaplan A F H. Measuring the effects of a laser beam on melt pool fluctuation in arc additive manufacturing[J]. Rapid Prototyping Journal, 25, 488-495(2019).

[17] Zhang Z D, Sun C S, Xu X K et al. Surface quality and forming characteristics of thin-wall aluminium alloy parts manufactured by laser assisted MIG arc additive manufacturing[J]. International Journal of Lightweight Materials and Manufacture, 1, 89-95(2018). http://www.sciencedirect.com/science/article/pii/S2588840418300052

[18] Wu S C, Hu Y N, Duan H et al. On the fatigue performance of laser hybrid welded high Zn 7000 alloys for next generation railway components[J]. International Journal of Fatigue, 91, 1-10(2016).

[19] Kou S. Welding metallurgy[M]. USA: John Wiley & Sons, Inc.(2003).

[20] Francis F C[M]. Introduction to plasma physics(1974).

[21] He L H. Microstructure and mechanical properties of 316L stainless steel fabricated by welding rapid forming[D]. Nanchang: Nanchang Hangkong University(2015).

[22] Ye C Q, Peng X Y, Hou S et al. Processing and properties of 316 stainless steel nuclear grade experimental component made by additive manufacturing[C]∥2018 9th International Conference on Civil Engineering, Materials and Machinery (2018).

[23] Pan C X, Zhu F Y, Chen Y D. EM study of the microstructure and microsegregation of austenitic stainless steel weldments[J]. Journal of Wuhan University of Water Transportation Engineering, 14, 419-424(1990).