[1] [1] YAN J X. Laser weapons ［M］. Beijing: National Defense Industry Press, 2016: 29-30(in Chinese).

[2] [2] XU J, LIANG M, LIU D Sh, et al. Research on power factor correction technology of pulse laser system charging power supply［J］. Laser Technology, 2020,44(6):732-737(in Chinese).

[3] [3] LI B, LI B T, HUANG B, et al. Design of high reliability pulse xe-non lamp power supply［J］. High Power Laser and Particle Beams, 2017, 29(6): 065004(in Chinese).

[4] [4] KIM K. Time-dependent one-dimensional modeling of pulsed plasma discharge in a capillary plasma device［J］. IEEE Transactions on Plasma Science, 2003, 31(4): 729-735.

[5] [5] LIU F C, ZHAO X J, HE S Ch. Design and experimental analysis of DSP-based PFN trigger timing control system［J］. High Voltage Engineering, 2013, 39(7): 1778-1783(in Chinese).

[6] [6] LIU F C, ZHAO X J, HE S Ch. The design of a DSP-based PFN tri-gger timing control system and the experimental study［C］∥16th International Symposium on Electromagnetic Launch Technology (EML). New York, USA: IEEE, 2012:1-6.

[7] [7] CHANG D I, LONG B, CHIU D, et al. A pulse forming network and test fixture for screening electrothermal chemical candidate propellants［J］. IEEE Transactions on Magnetics, 1993, 29(1): 919-922.

[8] [8] LI Zh Q, YANG J H, ZHANG J D, et al. A compact repetitive PFN-marx generator［J］. High Power Laser and Particle Beams, 2016, 28(1): 015013(in Chinese).

[9] [9] TIAN J Ch, SONG X Q, LI Z L. Theoretical analysis and calculation of HPM pulse forming network［J］. Journal of Spacecraft TT&C Technology, 2003, 22(3): 72-74(in Chinese).

[10] [10] WANG Ch W, LI H T. Theoretical analysis and design of the trapezoidal pulse forming network［J］. High Power Laser and Particle Beams, 2018, 30(3): 035005(in Chinese).

[11] [11] TANG Y L, LIU J, LI B M. Research on discharge timing control of multi-parameter pulse forming network［J］. Journal of Physics: Conference Series, 2021, 1721(1): 012043.

[12] [12] SCHOLFIELD D W, BUTCHER M D, HILKO B, et al. Vacuum switch performance in a 1.2MJ pulse forming network［J］. The Review of Scientific Instruments, 2008, 79(1/2): 024703.

[13] [13] LI X Q, ZHAO J, WU H G, et al. Design of xenon flash lamp su-pply adopting integrally triggering and pre-ionization［J］. High Power Laser Particle Beams, 2014, 26(7): 075004(in Chinese).

[14] [14] CAO Sh G, SHAO R Y, LIN W Zh, et al. Study on the dynamic model of high power flash lamp for simulation with Pspice[J]. A-pplied Laser, 2006, 26(6): 457-459(in Chinese).

[15] [15] ZHAO Y Q, DONG P F, MIAO P L, et al. Study on discharge process of high performance xeon flash lamp［J］. Analytical Instrumentation, 2016,206(4): 44-48(in Chinese).

[16] [16] WANG Ch W, LI H T. Design of trapezoidal pulse forming network based on simplex optimization method ［J］. High Power Laser and Particle Beams, 2020, 32(6): 065001(in Chinese).

[17] [17] LIN Q H, LI B M. Analysis on surge process generated in high power pulse forming network with capacitor energy storage system［J］. Journal of Nanjing University of Science and Technology, 2008, 32(6): 729-732(in Chinese)．

[18] [18] KOECHNER W S. Solid-state laser engineering［M］. Beijing: Science Press, 2002: 257-267(in Chinese).

[19] [19] CHEN D G. Some problem in design of design of pulse forming network［J］. Modern Electronics, 1998, 63(2): 22-27(in Chinese).

[20] [20] ZHAO J, LI B T, WANG Ch W, et al. Design of pulsed power circuit based on waveform analysis［J］. High Power Laser and Particle Beams, 2017,29(12): 065004(in Chinese).

[21] [21] LONG X F. Investigation of marx-PFN［D］. Changsha: National University of Defense Technology, 2007: 5-21(in Chinese).

[22] [22] LIU X S. High pulsed power technology［M］. Beijing: National Defense Industry Press, 2005: 116-119(in Chinese).

[23] [23] ZHOU T M. Principle design of light source［M］. Shanghai: Fudan University Press, 2006: 387-391(in Chinese).

[24] [24] YU Y J, FAN P Zh, FANG W G. Measurement of electrode drop of pulsed xenon lamp［J］. Laser Journal, 1979,6(5): 41-44(in Ch-inese).