[1] [1] U. Kopp Martin, J. de Mello Andrew, A. Manz et al.. Chemical amplification continuous-flow PCR on a chip［J］. Science, 1998, 280(5366): 1046～1048

[2] [2] Fang Zhaolun. Microfluidic chip development and prospects［J］. University Chemistry, 2001, 16(2): 1～6

[3] [3] C.-H. Tein, Y.-E. Chien, Y. Chiu et al.. Microlens array fabricated by excimer laser micromachining with gray-tone photolithography［J］. Jpn. J. Appl. Phys., Part1, 2003, 42(3): 1280～1283

[4] [4] K. Zimmer, D. Hirsch, F. Bigl. Excimer laser machining for the fabrication of analogous microstructures［J］. Appl. Surf. Sci., 1996, 96-98: 425～429

[5] [5] K. Naessens, H. Ottevaere P. V. Daele et al.. Flexible fabrication of microlenses in polymer layers with excimer laser ablation［J］. Appl. Surf. Sci., 2003, 208-209(1): 159～164

[6] [6] Qi Heng, Yao Liying, Wang Tong et al.. Excimer laser micromachining of PMMA based PCR micro-fluidic chip［J］. Microfab. Technol., 2006, (1): 16～19

[7] [7] K. Naessens, H. Ottevaere, R. Baets et al.. Direct writing of microlenses in polycarbonate with excimer laser ablation［J］. Appl. Opt., 2003, 42(31): 6349～6359

[8] [8] Qi Heng, Wang Xiansong, Chen Tao et al.. Fabrication and application of PMMA continuous-flow PCR microfluidic chip with CO2 laser direct-writing ablation micromachining technique［J］. Chinese J. Lasers, 2009, 36(5): 1239～1245

[9] [9] L. M. Galantucci, F. Giusti. Excimer laser cutting: experimental characterization and 3D numerical modeling for polyester resins［J］. Ann. CIRP, 1998, 47(1): 141～144

[10] [10] K. Zimmer, A. Braun, F. Bigl. Combination of different processing methods for the fabrication of 3D polymer structures by excimer laser machining［J］. Appl. Surf. Sci., 2000, 154-155: 601～604

[11] [11] A. Braun, K. Zimmer, B. Hosselbarth et al.. Excimer laser micromachining and replication of 3D optical surface［J］. Appl. Surf. Sci., 1998, 127-129: 911～914

[12] [12] J. Arnold, U. Dasbach, W. Ehrfeld et al.. Combination of excimer laser micromachining and replication processes suite for large scale production［J］. Appl. Surf. Sci., 1995, 86(1): 251～258

[13] [13] J. K. Dennis, T. E. Such. Nickel and Chromium Plating［M］. Cambridge: Woodhead, 1993

[14] [14] Qin Qixian, Feng Wanqi, Zhao Zhiqiang. Development of a new type of nickel electroforming electrolyte solution［J］. Plating and Finishing, 2002, 24(5): 13～16

[15] [15] G. Croce, P. D′Agaro. Numerical simulation of roughness effect on micro-channel heat transfer and pressure drop in laminar flow［J］. Phys. D., 2005, 38(10): 1518～1530

[16] [16] Y. D. Hu, C. Werner, D. Q. Li. Influence of three-dimensional roughness on pressure-driven flow through micro-channels［J］. Fluids Engng., 2005, 125(5): 871～879

[17] [17] X. Q. Wang, C. Yap, A. S. Mujumdar. Effects of two-dimensional roughness in flow in micro-channels［J］. Electron Packaging, 2005, 127(3): 357～361