[1] Wang H M. Materials' fundamental issues of laser additive manufacturing for high-performance large metallic components[J]. Acta Aeronautica et Astronautica Sinica, 35, 2690-2698(2014).

[2] Huang W D, Lin X. Research progress in laser solid forming of high performance metallic component[J]. Materials China, 29, 12-27(2010).

[3] Li L Q, Wang J D, Wu C C et al. Temperature field of molten pool and microstructure analysis of laser melting deposition[J]. Chinese Journal of Lasers, 44, 0302009(2017).

[4] Wang Z H, Wang H M, Liu D. Microstructure and mechanical properties of AF1410 ultra-high strength steel using laser additive manufacture technology[J]. Chinese Journal of Lasers, 43, 0403001(2016).

[5] Mazumder J, Schifferer A, Choi J. Direct materials deposition: Designed macro and microstructure[J]. Materials Research Innovations, 3, 118-131(1999). http://www.emeraldinsight.com/servlet/linkout?suffix=b120&dbid=16&doi=10.1108%2F13552540910979785&key=10.1007%2Fs100190050137

[6] Xi M Z, Gao S Y. Microstructure and mechanism of crack forming of Rene 80 high-temperature alloy fabricated by laser rapid forming progress[J]. Chinese Journal of Lasers, 39, 0803008(2012).

[7] Chen J, Zhang F Y, Tan H et al. Alloying mechanics in moving melt pool during laser solid forming from blended elemental powders[J]. Chinese Journal of Lasers, 37, 86-91(2010).

[8] Lin X, Yang H O, Chen J et al. Microstructure evolution of 316L stainless steel during laser rapid forming[J]. Acta Metallurgica Sinica, 42, 361-368(2006).

[9] Kobryn P A, Moore E H, Semiatin S L. The effect of laser power and traverse speed on microstructure, porosity, and build height in laser-deposited Ti-6Al-4V[J]. Scripta Materialia, 43, 299-305(2000). http://www.sciencedirect.com/science/article/pii/S1359646200004085

[10] Majumdar J D, Pinkerton A, Liu Z et al. Microstructure characterisation and process optimization of laser assisted rapid fabrication of 316L stainless steel[J]. Applied Surface Science, 247, 320-327(2005). http://www.sciencedirect.com/science/article/pii/S0169433205001182

[11] Lütjering G. Influence of processing on microstructure and mechanical properties of (α+β) titanium alloys[J]. Materials Science and Engineering A, 243, 32-45(1998). http://www.sciencedirect.com/science/article/pii/S0921509397007788

[12] Li T J, Sassa K, Asai S. Elimination of surface defects of continuously cast metals by synchronizing magnetic field with mold oscillation[J]. Journal of Dalian University of Technology, 6, 751-755(1999).

[13] Jin W Z, Zhang Q F, Li T J et al. Effect of rotating electromagnetic stirring on quality of K417 superalloy master alloy ingots[J]. Hot Working Technology, 40, 14-17(2011).

[14] Tang G P, Chen J M, Liu J. Application of electromagnetic stirring technology in welding[J]. Welding Technology, 35, 3-5(2006).

[15] Gatzen M, Tang Z, Vollertsen F. Effect of electromagnetic stirring on the element distribution in laser beam welding of aluminium with filler wire[J]. Physics Procedia, 12, 56-65(2011). http://www.sciencedirect.com/science/article/pii/S1875389211000873

[16] Bachmann M, Avilov V, Gumenyuk A. et al. Experimental and numerical investigation of an electromagnetic weld pool control for laser beam welding[J]. Physics Procedia, 56, 515-524(2014). http://www.sciencedirect.com/science/article/pii/S1875389214001515

[17] Xu H, Zheng Q G, Ding Z H et al. Study on laser cladding hard alloy with electromagnetic stirring[J]. Laser Technology, 29, 449-451(2005).

[18] Yu B H, Hu X H, Wu Y E et al. Studies of the effects and mechanism of electromagnetic stirring on the microstructures and hardness of laser cladding WC-Co based alloy coating[J]. Chinese Journal of Lasers, 37, 2672-2677(2010).

[19] Liu H X, Ji S W, Jiang Y H et al. Microstructure and property of Fe60 composite coatings by rotating magnetic field auxiliary laser cladding[J]. Chinese Journal of Lasers, 40, 0103007(2013).

[20] Cai C X, Liu H X, Jiang Y H et al. Influence of AC magnetic field on microstructure and wear behaviors of laser cladding Fe-based composite coating[J]. Tribology, 33, 229-235(2013).

[21] Qi P. The application and research of electromagnetic stirring technology in titanium alloy laser rapid repair[D]. Shenyang: Shenyang Aerospace University(2013).

[22] Yu X B, Liu F C, Lin X et al. Microstructure and hardness of GH4169 superalloy fabricated by electromagnetic stirring assisted laser solid forming[J]. Applied Laser, 34, 513-517(2014).

[23] Kim T W, Jeong H Y. Hydroplaning simulations for tires using FEM, FVM and an asymptotic method[J]. International Journal of Automotive Technology, 11, 901-908(2010). http://link.springer.com/article/10.1007/s12239-010-0107-0

[24] Gong H J. Numerical simulation of indirectly coupled electromagnetic-solidification transport process[D]. Harbin: Harbin Institute of Technology(2013).

[25] Bachmann M, Avilov V, Gumenyuk A et al. Experimental and numerical investigation of an electromagnetic weld pool support system for high power laser beam welding of austenitic stainless steel[J]. Journal of Materials Processing Technology, 214, 578-591(2014). http://www.sciencedirect.com/science/article/pii/S0924013613003403

[26] Bachmann M, Avilov V, Gumenyuk A. et al. Numerical simulation of full-penetration laser beam welding of thick aluminium plates with inductive support[J]. Journal of Physics D: Applied Physics, 45, 035201(2011). http://www.ingentaconnect.com/content/iop/jphysd/2012/00000045/00000003/art035201

[27] Brent A D, Voller V R. Reid K T J. Enthalpy-porosity technique for modeling convection-diffusion phase change: application to the melting of a pure metal[J]. Numerical Heat Transfer, 13, 297-318(1988). http://www.tandfonline.com/doi/abs/10.1080/10407788808913615

[28] Choo R T C, Szekely J, Westhoff R C. On the calculation of the free surface temperature of gas-tungsten-arc weld pools from first principles: Part I. Modeling the welding arc[J]. Metallurgical Transactions B, 23, 357-369(1992). http://link.springer.com/article/10.1007/BF02656292

[29] Xia S Q, He J J, Wang W et al. Simulation of three-dimensional transient behavior of molten pool in laser deep penetration welding[J]. Chinese Journal of Lasers, 43, 1102004(2016).