[1] H. Kiriyama, M. Mori, A. S. Pirozhkov et al. High-contrast, high-intensity petawatt-class laser and applications. IEEE J. Sel. Top. Quantum Electron., 21, 232(2015).

[2] S. W. Bahk, P. Rousseau, T. Planchon et al. Generation and characterization of the highest laser intensities (1022 W/cm2). Opt. Lett., 29, 2837(2004).

[3] D. Strickland, G. Mourou. Compression of amplified chirped optical pulses. Opt. Commun., 55, 447(1985).

[4] A. Dubietis, G. Jonusauskas, A. Piskarskas. Powerful femtosecond pulse generation by chirped and stretched pulse parametric amplification in BBO crystal. Opt. Commun., 88, 437(1992).

[5] I. Ahmad, S. A. Trushin, Z. Major et al. Frontend light source for short-pulse pumped OPCPA system. Appl. Phys. B Lasers Opt., 97, 529(2009).

[6] J. Bromage, S. W. Bahk, I. A. Begishev et al. Technology development for ultraintense all-OPCPA systems. High Power Laser Sci. Eng., 7, e4(2019).

[7] M. Aoyama, K. Yamakawa, Y. Akahane et al. 0.85-PW, 33-fs Ti:sapphire laser. Opt. Lett., 28, 1594(2003).

[8] V. V. Lozhkarev, G. I. Freidman, V. N. Ginzburg et al. 200 TW 45 fs laser based on optical parametric chirped pulse amplification. Opt. Exp., 14, 446(2006).

[9] J. H. Kelly, L. J. Waxer, V. Bagnoud et al. OMEGA EP: High-energy petawatt capability for the OMEGA laser facility. J. Phys. IV, 133, 75(2006).

[10] F. Lureau, S. Laux, O. Casagrande et al. Latest results of 10 petawatt laser beamline for ELI Nuclear Physics infrastructure. Conference on Solid State Lasers XXV - Technology and Devices(2016).

[11] K. A. Tanaka, K. M. Spohr, D. L. Balabanski et al. Current status and highlights of the ELI-NP research program. Matter Radiat. Extremes, 5, 024402(2020).

[12] C. Danson, D. Hillier, N. Hopps et al. Petawatt class lasers worldwide. High Power Laser Sci. Eng., 3, e3(2015).

[13] R. F. Service. Laser labs race for the Petawatt. Science, 301, 154(2003).

[14] G. Korn, B. LeGarrec, B. Rus. ELI Extreme Light Infrastructure science and technology with ultra-intense lasers. CLEO: 2013(2013).

[15] A. Tarasov, H. Chu. Impact of pump light spatial modulation on the generation of gain-switched sub-nanosecond Ti:Sapphire laser. Opt. Exp., 27, 16250(2019).

[16] H. Kiriyama, M. Michiaki, Y. Nakai et al. High-spatiotemporal-quality petawatt-class laser system. Appl. Opt, 49, 2105(2010).

[17] Z. Hubka, R. Antipenkov, R. Boge et al. Optimization of pump lasers for high-energy OPCPA system. Conference on High Power Lasers and Applications(2021).

[18] J. Novák, J. T. Green, T. Metzger et al. Thin disk amplifier-based 40 mJ, 1 kHz, picosecond laser at 515 nm. Opt. Exp., 24, 5728(2016).

[19] G. M. Heestand, C. A. Haynam, P. J. Wegner et al. Demonstration of high-energy 2ω (526.5 nm) operation on the national ignition facility laser system. Appl. Opt., 47, 3494(2008).

[20] M. L. Liang, C. L. Hu, F. Kong et al. BiFSeO3: an excellent SHG material designed by aliovalent substitution. J. Am. Chem. Soc., 138, 9433(2016).

[21] J. P. Phillips, S. Banerjee, J. Smith et al. High energy, high repetition rate, second harmonic generation in large aperture DKDP, YCOB, and LBO crystals. Opt. Exp., 24, 19682(2016).

[22] X. Wang, X. Liu, X. Lu et al. 13.4 fs, 0.1 Hz OPCPA front end for the 100 PW-class laser facility. Ultrafast Sci., 2022(2022).

[23] J. Qiao, A. W. Schmid, L. J. Waxer et al. Detection and analysis of laser-induced damage on a 1.5-m multilayer-dielectric grating compressor for high-energy, petawatt-class laser systems. Opt. Exp., 18, 10423(2010).

[24] Z. M. Liao, G. M. Abdulla, R. A. Negres et al. Predictive modeling techniques for nanosecond-laser damage growth in fused silica optics. Opt. Exp., 20, 15569(2012).

[25] A. G. Demir, B. Previtali. Remote cutting of Li-ion battery electrodes with infrared and green ns-pulsed fibre lasers. Int. J. Adv. Manuf. Technol., 75, 1557(2014).

[26] G. Gomez-Rosas, C. Rubio-Gonzalez, J. L. Ocaña et al. Laser shock processing of 6061-T6 Al alloy with 1064 nm and 532 nm wavelengths. Appl. Surf. Sci., 256, 5828(2010).

[27] S. Bae, Y. Kim, J. Jung et al. Effects of laser shock peening on Inconel 738LC to improve mechanical and fatigue characteristics. Opt. Laser Technol., 171, 110290(2024).

[28] G. Lee, S. Park, H. Jo et al. Real-time monitoring system for 100 mJ laser shock peening. Opt. Lasers Eng., 178, 108248(2024).

[29] P. Ganesh, R. Sundar, H. Kumar et al. Studies on laser peening of spring steel for automotive applications. Opt. Lasers Eng., 50, 678(2012).

[30] W. Q. Zhang, J. Z. Lu, K. Y. Luo. Residual stress distribution and microstructure at a laser spot of AISI 304 stainless steel subjected to different laser shock peening impacts. Metals, 6, 6(2016).

[31] X. J. Shen, P. Shukla, S. Nath et al. Improvement in mechanical properties of titanium alloy (Ti-6Al-7Nb) subject to multiple laser shock peening. Surf. Coatings Technol., 327, 101(2017).