[1] Gu D D, Zhang H M, Chen H Y et al. Laser additive manufacturing of high-performance metallic aerospace components[J]. Chinese Journal of Lasers, 47, 0500002(2020).

[2] Ji X, Sun Z G, Chang L L et al. Microstructure evolution behavior in laser melting deposition of Ti6Al4V/Inconel625 gradient high-temperature resistant coating[J]. Chinese Journal of Lasers, 46, 1102008(2019).

[3] Banerjee D, Williams J C. Perspectives on titanium science and technology[J]. Acta Materialia, 61, 844-879(2013).

[4] Liang J, Gao M Y, Liu C S et al. Laser induced in situ formation of titanium composite coatings[J]. Chinese Journal of Lasers, 36, 3272-3276(2009).

[5] Yetim A F, Celik A, Alsaran A. Improving tribological properties of Ti6Al4V alloy with duplex surface treatment[J]. Surface and Coatings Technology, 205, 320-324(2010). http://www.sciencedirect.com/science/article/pii/S0257897210004792

[6] Qin Y L, Geng L, Ni D R. Dry sliding wear behavior of extruded titanium matrix composite reinforced by in situ TiB whisker and TiC particle[J]. Journal of Materials Science, 46, 4980-4985(2011). http://link.springer.com/article/10.1007/s10853-011-5415-x

[7] Tjong S C, Ma Z Y. Microstructural and mechanical characteristics of in situ metal matrix composites[J]. Materials Science and Engineering R, 29, 49-113(2000). http://www.sciencedirect.com/science/article/pii/S0927796X00000243

[8] Wang F Q, Qin J N, Wang L Q et al. Room temperature and high temperature tensile properties of in situ synthesized(TiB+TiC)/Ti-6Al-4V composites[J]. Materials for Mechanical Engineering, 37, 49-52,61(2013).

[9] He B, Lan J J, Yang G et al. Microstructure and wear-resistant properties of in situ TiB-TiC reinforced titanium matrix composites by laser deposition manufacturing[J]. Rare Metal Materials and Engineering, 46, 3805-3810(2017).

[10] Attar H, Ehtemam-Haghighi S, Kent D et al. Nanoindentation and wear properties of Ti and Ti-TiB composite materials produced by selective laser melting[J]. Materials Science and Engineering A, 688, 20-26(2017).

[11] Attar H, Bönisch M, Calin M et al. Selective laser melting of in situ titanium-titanium boride composites: processing, microstructure and mechanical properties[J]. Acta Materialia, 76, 13-22(2014). http://www.sciencedirect.com/science/article/pii/S135964541400370X

[12] Zhu L Y. Study on multiple forging process and heat treatment of TiBw/Ti-6Al-4V composites materials[D]. Harbin: Harbin Institute of Technology(2018).

[13] Cai C, He S, Li L F et al. In-situ TiB/Ti-6Al-4V composites with a tailored architecture produced by hot isostatic pressing: microstructure evolution, enhanced tensile properties and strengthening mechanisms[J]. Composites Part B: Engineering, 164, 546-558(2019).

[14] Ma Z Y, Tjong S C, Gen L. In-situ Ti-TiB metal-matrix composite prepared by a reactive pressing process[J]. Scripta Materialia, 42, 367-373(2000). http://www.sciencedirect.com/science/article/pii/S1359646299003541

[15] Song B, Wang Z W, Yan Q et al. Integral method of preparation and fabrication of metal matrix composite: selective laser melting of in situ nano/submicro-sized carbides reinforced iron matrix composites[J]. Materials Science and Engineering A, 707, 478-487(2017). http://www.sciencedirect.com/science/article/pii/S0921509317312625

[16] Fukuda A, Takemoto M, Saito T et al. Osteoinduction of porous Ti implants with a channel structure fabricated by selective laser melting[J]. Acta Biomaterialia, 7, 2327-2336(2011). http://europepmc.org/abstract/med/21295166

[17] Niu H J. Chang I T H. Selective laser sintering of gas and water atomized high speed steel powders[J]. Scripta Materialia, 41, 25-30(1999). http://www.sciencedirect.com/science/article/pii/S1359646299000895

[18] Das M, Balla V K, Basu D et al. Laser processing of SiC-particle-reinforced coating on titanium[J]. Scripta Materialia, 63, 438-441(2010). http://www.sciencedirect.com/science/article/pii/S1359646210003003

[19] Panda K B. Ravi Chandran K S. Synthesis of ductile titanium-titanium boride (Ti-TiB) composites with a beta-titanium matrix: the nature of TiB formation and composite properties[J]. Metallurgical and Materials Transactions A, 34, 1371-1385(2003).

[20] Galvan D. OcelíkV, Pei Y, et al. Microstructure and properties of TiB/Ti-6Al-4V coatings produced with laser treatments[J]. Journal of Materials Engineering and Performance, 13, 406-412(2004).

[21] Banerjee R, Collins P C, Fraser H L . Laser deposition of in situ Ti-TiB composites[J]. Advanced Engineering Materials, 4, 847-851(2002).

[22] Lu W J, Xiao L, Geng K. Growth mechanism of W in titanium matrix composites prepared by common casting technique[J]. Materials Characterization, 59, 912-919(2008).

[23] Sahay S S, Ravichandran K S, Atri R. Evolution of microstructure and phases in in situ processed Ti-TiB composites containing high volume fractions of TiB whiskers[J]. Journal of Materials Research, 14, 4214-4223(1999).

[24] Huang L J, Yang F Y, Hu H T et al. TiB whiskers reinforced high temperature titanium Ti60 alloy composites with novel network microstructure[J]. Materials & Design, 51, 421-426(2013). http://www.sciencedirect.com/science/article/pii/S0261306913003713

[25] Gu D D, Hagedorn Y C, Meiners W et al. Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium[J]. Acta Materialia, 60, 3849-3860(2012).

[26] Li W, Liu J, Zhou Y et al. Effect of substrate preheating on the texture, phase and nanohardness of a Ti-45Al-2Cr-5Nb alloy processed by selective laser melting[J]. Scripta Materialia, 118, 13-18(2016). http://www.sciencedirect.com/science/article/pii/S1359646216300665

[27] Trojanová Z, Gärtnerová V, Jäger A et al. Mechanical and fracture properties of an AZ91 Magnesium alloy reinforced by Si and SiC particles[J]. Composites Science and Technology, 69, 2256-2264(2009). http://www.sciencedirect.com/science/article/pii/S0266353809002486