[1] Ren Y Y, Du A B, Feng W et al. Manufacturing method of high-silicon titanium-containing outer sleeve made of austenitic stainless steel: CN109097678A[P](2018).

[2] Wang B S, Yang C, Xie F et al. Effect of heat treatment process on the grain boundary character distribution of CN1515 stainless steel tubes[J]. Shanghai Metals, 40, 47-52(2018).

[3] Wang B M, Chen T, Xu T et al. Influence of welding technology on strain strengthening properties of austenitic stainless steel welded joints[J]. Materials for Mechanical Engineering, 37, 29-33(2013).

[4] Hu Q Y. Welding quality problems and countermeasures of chromium nickel austenitic stainless steel[J]. Equipment Manufacturing Technology, 109-110,113(2016).

[5] Gu S Y, Liu Z J, Zhang P L et al. Appearances and formation mechanism of welds in high-strength steels by high speed laser-arc hybrid welding[J]. Chinese Journal of Lasers, 45, 1202007(2018).

[6] Ribic B, Palmer T A. DebRoy T. Problems and issues in laser-arc hybrid welding[J]. International Materials Reviews, 54, 223-244(2009).

[7] Bagger C, Olsen F O. Review of laser hybrid welding[J]. Journal of Laser Applications, 17, 2-14(2005). http://scitation.aip.org/content/lia/journal/jla/17/1/10.2351/1.1848532

[8] Hu L H, Huang J, Ni H F et al. CO2 laser hybrid welding processes and microstructures of 10Ni3CrMoV steel in T joint form[J]. Chinese Journal of Lasers, 38, 0303003(2011).

[9] Chen Y B, Lei Z L, Li L Q et al. Experimental study on welding characteristics of CO2 laser TIG hybrid welding process[J]. Science and Technology of Welding and Joining, 11, 403-411(2006). http://www.zhangqiaokeyan.com/academic-journal-foreign_other_thesis/020415055718.html

[10] Ragavendran M, Vasudevan M. Laser and hybrid laser welding of type 316L(N) austenitic stainless steel plates[J]. Materials and Manufacturing Processes, 35, 922-934(2020). http://www.tandfonline.com/doi/full/10.1080/10426914.2020.1745231

[11] Liu F D, Li X R, Li Y Z et al. Study of the microstructure and impact properties of the heat-affected zone of high nitrogen steel for laser-arc hybrid welding[J]. Materials Research Express, 6, 076505(2019). http://iopscience.iop.org/article/10.1088/2053-1591/ab11f7

[12] Yan J, Gao M, Zeng X Y. Study on microstructure and mechanical properties of 304 stainless steel joints by TIG, laser and laser-TIG hybrid welding[J]. Optics and Lasers in Engineering, 48, 512-517(2010).

[13] Miyagi M, Wang J Y. Keyhole dynamics and morphology visualized by in situ X-ray imaging in laser melting of austenitic stainless steel[J]. Journal of Materials Processing Technology, 282, 116673(2020). http://www.sciencedirect.com/science/article/pii/S092401362030087X

[14] Kaul R, Kumar H, Rao B T et al. Studies on characteristics of CO2 laser-GTAW hybrid welding of austenitic stainless steel[J]. Journal of Laser Applications, 22, 79-85(2010). http://scitation.aip.org/content/lia/journal/jla/22/2/10.2351/1.3455995

[15] Sun J H, Nie P L, Lu F G et al. The characteristics and reduction of porosity in high-power laser welds of thick AISI 304 plate[J]. The International Journal of Advanced Manufacturing Technology, 93, 3517-3530(2017). http://link.springer.com/article/10.1007%2Fs00170-017-0734-y

[16] Suutala N. Effect of solidification conditions on the solidification mode in austenitic stainless steels[J]. Metallurgical Transactions A, 14, 191-197(1983). http://link.springer.com/article/10.1007/BF02651615

[17] Suutala N, Takalo T, Moisio T. Ferritic-austenitic solidification mode in austenitic stainless steel welds[J]. Metallurgical Transactions A, 11, 717-725(1980).

[18] Suutala N, Takalo T, Moisio T. The relationship between solidification and microstructure in austenitic and austenitic-ferritic stainless steel welds[J]. Metallurgical Transactions A, 10, 512-514(1979).

[19] Fu J W, Yang Y S, Guo J J et al. Effect of cooling rate on solidification microstructures in AISI 304 stainless steel[J]. Materials Science and Technology, 24, 941-944(2008).

[20] Wu C F, Li S L, Zhang C H et al. Microstructural evolution in 316LN austenitic stainless steel during solidification process under different cooling rates[J]. Journal of Materials Science, 51, 2529-2539(2016). http://link.springer.com/article/10.1007/s10853-015-9565-0

[21] Liu G L, Yang S W, Han W T et al. Microstructural evolution of dissimilar welded joints between reduced-activation ferritic-martensitic steel and 316L stainless steel during the post weld heat treatment[J]. Materials Science and Engineering: A, 722, 182-196(2018).