[1] Dubourg L, Ursescu D, Hlawka F et al. Laser cladding of MMC coatings on aluminium substrate: influence of composition and microstructure on mechanical properties[J]. Wear, 258, 1745-1754(2005).

[2] Chen S X, Richter B, Morrow J D et al. Pulsed laser remelting of A384 aluminum, part I: measuring homogeneity and wear resistance[J]. Journal of Manufacturing Processes, 32, 606-614(2018).

[3] Chi Y M, Gu G C, Yu H J et al. Laser surface alloying on aluminum and its alloys: a review[J]. Optics and Lasers in Engineering, 100, 23-37(2018).

[4] Sun Y H, Zhou J Z, Sheng J et al. Tensile property and fracture analysis of 2024-T351 aluminum alloys by cryogenic laser peening[J]. Chinese Journal of Lasers, 44, 0802003(2017).

[5] Zhang G Y, Wang C L, Gao Y et al. Effect of rare earth La2O3 on the microstructure of laser cladding Ni-based coatings on 6063 Al alloys[J]. Chinese Journal of Lasers, 41, 1103001(2014).

[6] Lei L P, Ye H, Song K et al. Effect of Al2O3-TiO2 on microstructure and properties of NiAl coating by laser cladding on aluminum alloy[J]. Surface Technology, 47, 145-150(2018).

[7] [7] BiswasK, GalunR, Mordike BL, et al., 2004, 334/335: 517- 523.

[8] Pakieła W, Tanski T, Pawlyta M et al. The structure and mechanical properties of AlMg5Si2Mn alloy after surface alloying by the use of fiber laser[J]. Applied Physics A, 124, 263(2018).

[9] Sharma A K, Gupta D. On microstructure and flexural strength of metal-ceramic composite cladding developed through microwave heating[J]. Applied Surface Science, 258, 5583-5592(2012).

[10] Kadolkar P, Dahotre N B. Effect of processing parameters on the cohesive strength of laser surface engineered ceramic coatings on aluminum alloys[J]. Materials Science and Engineering: A, 342, 183-191(2003).

[11] Zhou S F, Huang Y J, Zeng X Y. A study of Ni-based WC composite coatings by laser induction hybrid rapid cladding with elliptical spot[J]. Applied Surface Science, 254, 3110-3119(2008).

[12] Emamian A, Corbin S F, Khajepour A. The effect of powder composition on the morphology of in situ TiC composite coating deposited by Laser-Assisted Powder Deposition (LAPD)[J]. Applied Surface Science, 261, 201-208(2012).

[13] Liu Z E[M]. Material science(2013).

[14] Kadolkar P, Dahotre N B. Variation of structure with input energy during laser surface engineering of ceramic coatings on aluminum alloys[J]. Applied Surface Science, 199, 222-233(2002).

[15] Liu Y Z, Dang B, Liu F. Effects of cooling rate on microstructure and microhardness of A356 alloy[J]. Journal of Xi'an Technological University, 33, 128-133(2013).

[16] Gao S X, Sun Y J, Gao Y J. Effects of La on microstructure and hardness of A356 aluminium alloy[J]. Hot Working Technology, 45, 81-83(2016).

[17] He B, Qin M, Li D G et al. Effects of solution time on microstructure and mechanical properties of A356 aluminium alloy containing Sc[J]. Heat Treatment of Metals, 43, 185-189(2018).

[18] Apps P J, Berta M, Prangnell P B. The effect of dispersoids on the grain refinement mechanisms during deformation of aluminium alloys to ultra-high strains[J]. Acta Materialia, 53, 499-511(2005).

[19] Fadavi Boostani A, Tahamtan S. Fracture behavior of thixoformed A356 alloy produced by SIMA process[J]. Journal of Alloys and Compounds, 481, 220-227(2009).

[20] Yi Y F, Long S Y, Xu S Y et al. Microstructure and mechanical properties of low-pressure casting A356 aluminum alloy wheel hub[J]. Special Casting & Nonferrous Alloys, 28, 373-375(2008).

[21] Katipelli L R, Agarwal A, Dahotre N B. Interfacial strength of laser surface engineered TiC coating on 6061 Al using four-point bend test[J]. Materials Science and Engineering: A, 289, 34-40(2000).

[22] Sun X F, Fang X S, Lu Y H[M]. Mechanics of materials(2012).