Chinese Journal of Lasers, Volume. 48, Issue 15, 1502005(2021)
Understanding and Controlling the Influence of Laser Energy on Penetration, Porosity, and Microstructure during Laser Welding
[1] Chen W Z. Quality control of laser welding and cutting[M](2010).
[2] Katayama S. Handbook of laser welding technologies[M](2013).
[3] Oikawa M. Study of laser welding quality control in manufacturing process of stainless steel car body shell of railroad vehicle[J]. Journal of the Japan Welding Society, 80, 240-243(2011).
[4] Wen P, Wu R F, Wang X Y et al. Laser welding parameters and tensile properties of partial penetration lap joint for stainless train body[J]. China Mechanical Engineering, 28, 1355-1361(2017).
[5] Liu Y J, Liu W, Xia H T et al. Fracture behavior and performance of overlap and butt laser welding joints of austenitic stainless steel car body sheets[J]. Journal of the China Railway Society, 36, 28-33(2014).
[6] Pei Y L, Shan J G, Ren J L. Effect of welding speed on melt flow behavior in high speed laser welding process[J]. Chinese Journal of Lasers, 40, 0503001(2013).
[7] Pei Y L, Wu A P, Shan J G et al. Investigation of humping formation based on melt flow analysis in high-speed laser welding process[J]. Acta Metallurgica Sinica, 49, 725-730(2013).
[8] Pei Y L, Shan J G, Ren J L. Study of humping tendency and affecting factors in high speed laser welding of stainless steel sheet[J]. Acta Metallurgica Sinica, 48, 1431-1436(2012).
[9] Wen P, Shinozaki K, Yamamoto M et al. In-situ observation of solidification cracking of laser dissimilar welded joints[J]. Quarterly Journal of the Japan Welding Society, 27, 134s-138s(2009).
[10] Wen P, Shinozaki K, Yamamoto M. High speed and high magnification in situ observation of residual liquid metal during laser welding process[J]. Acta Metallurgica Sinica, 47, 305-310(2011).
[11] Wen P, Shinozaki K, Yamamoto M. Evaluation of solidification cracking susceptibility during laser welding by in situ observation method[J]. Chinese Journal of Lasers, 38, 0603005(2011).
[12] Wen P, Shinozaki K, Yamamoto M. In-situ observation of residual liquid metal during laser welding of austenite stainless steels[J]. Transactions of the China Welding Institution, 33, 53-56, 115(2012).
[13] Wen P, Yamamoto M, Senda Y et al. Study on solidification cracking of laser dissimilar welded joints by using in situ observation and numerical simulation[J]. Welding in the World, 54, R257-R266(2010).
[14] Wen P, Shinozaki K, Yamamoto M. Experimental research and numerical simulation of solidification crack during laser welding of ring structure[J]. Acta Metallurgica Sinica, 47, 1241-1245(2011).
[15] Tan X H, Zhang J, Shan J G et al. Characteristics and formation mechanism of porosities in CFRP during laser joining of CFRP and steel[J]. Composites Part B: Engineering, 70, 35-43(2015).
[16] Tan X H, Shan J G, Tang L et al. Study on laser surfi-sculpt of GMW2 autobody sheet steel for carbon fiber reinforced polymer/steel dissimilar joint[J]. Chinese Journal of Lasers, 42, 0303002(2015).
[17] Zhang Z, Tan X H, Zhang J et al. Suppression of shrinkage porosity in laser-joining of CFRP and steel using a laser surface modification process “surfi-sculpt”[J]. International Journal of Adhesion and Adhesives, 85, 184-192(2018).
[18] Zhang Z, Shan J G, Tan X H et al. Improvement of the laser joining of CFRP and aluminum via laser pre-treatment[J]. The International Journal of Advanced Manufacturing Technology, 90, 3465-3472(2017).
[19] Shan J G, Zhang J. Research status and prospect on porosity during laser welding of magnesium alloy[J]. Welding & Joining, 34-41, 74(2009).
[20] Shan J G, Zhang J, Zheng S Q et al. Experimental study on the reason of pore formation in laser welding of die-cast magnesium alloy[J]. Acta Metallurgica Sinica, 45, 1006-1012(2009).
[21] Shan J G, Zhang J, Zheng S Q et al. Experimental study on pores in laser welding of magnesium alloys[J]. Rare Metal Materials and Engineering, 38, 234-239(2009).
[22] Zhang J, Shan J G, Wen P et al. Effects of welding parameters on weld porosity during CO2 laser welding of die-cast magnesium alloys[J]. Transactions of the China Welding Institution, 32, 17-20,24,113-114(2011).
[23] Zhang J, Shan J G, Ren J L et al. Reducing the porosity in die-cast magnesium alloys during laser welding[J]. Welding Journal, 92, 101-109(2013).
[24] Zhao H Y, Niu W C, Zhang B et al. Modelling of keyhole dynamics and porosity formation considering the adaptive keyhole shape and three-phase coupling during deep-penetration laser welding[J]. Journal of Physics D, 44, 485302(2011).
[25] Chang B H, Allen C, Blackburn J et al. Fluid flow characteristics and porosity behavior in full penetration laser welding of a titanium alloy[J]. Metallurgical and Materials Transactions B, 46, 906-918(2015).
[26] Wen P, Yelkenci D, Chen J H et al. Numerical analysis of the effect of welding positions on formation quality during laser welding of TC4 titanium alloy parts in aerospace industry[J]. Journal of Laser Applications, 31, 022401(2019).
[27] Chang B H, Yuan Z, Pu H T et al. Study of gravity effects on titanium laser welding in the vertical position[J]. Materials, 10, 1031(2017).
[28] Chang B H, Yuan Z, Cheng H et al. A study on the influences of welding position on the keyhole and molten pool behavior in laser welding of a titanium alloy[J]. Metals, 9, 1082(2019).
[29] Chang B H, Yuan Z, Pu H T et al. A comparative study on the laser welding of Ti6Al4V alloy sheets in flat and horizontal positions[J]. Applied Sciences, 7, 376(2017).
[30] Chang B H, Xiao H, Zeng J L et al. Fluid flow characteristics and weld formation quality in gas tungsten arc welding of a thick-sheet aluminum alloy structure by varying welding position[J]. Applied Sciences, 8, 1215(2018).
[31] Peng Y, Wang C, Chen W Z et al. Laser welding of two super fine grain steels[J]. Transactions of the China Welding Institution, 22, 3, 31-35(2001).
[32] Wang C, Chen W Z, Peng Y et al. Effect of laser welding parameters on the figuration and microstructure properties of micron-grained steel welding joint[J]. Laser & Optoelectronics Progress, 38, 33-34(2001).
[33] Peng Y, Tian Z L, Chen W Z et al. Laser welding of ultra-fine grained steel SS400[J]. Journal of Iron and Steel Research, 10, 32-36(2003).
[34] Zhang X D, Chen W Z, Wang C et al. Microstructures and toughness of weld metal of ultrafine grained ferritic steel by laser welding[J]. Journal of Materials Science & Technology, 20, 755-759(2004).
[35] Peng Y, Tian Z L, Wang C et al. Study of welding ultra-fine grained ferrite steel by CO2 laser[J]. Steel Research, 73, 508-512(2002).
[36] Wang C, Zhang X D, Chen W Z et al. Modeling and experimental study on HAZ grain growth in laser welding of ultra-fine grained steel[J]. Applied Laser, 22, 181-184(2002).
[37] Zhao L, Chen W Z, Zhang X D. Microstructure and mechanical properties of laser welded heat-affected zone in new ultra-low carbon bainitic steel[J]. Chinese Journal of Lasers, 33, 408-412(2006).
[38] Zhao L, Zhang X D, Chen W Z. Toughness of heat-affected zone of 800 MPa grade low alloy steel[J]. Acta Metallrugica Sinica, 41, 392-396(2005).
[39] Zhao L, Zhang X D, Chen W Z et al. Microstructure and mechanical properties of laser welded CGHAZ of RPC steel[J]. Transactions of the China Welding Institution, 26, 5-8, 12(2005).
[40] Lin Z, Chen W Z, Zhang X D et al. Structure character of M-A constituent in CGHAZ of new ultra-low carbon bainitic steel under laser welding conditions[J]. Journal of Materials Science & Technology, 22, 382-386(2006).
[41] Luo C, Cao Y, Zhao Y et al. Fiber laser welding of 1700-MPa, ultrahigh-strength steel[J]. Welding Journal, 97, 214-228(2018).
[42] Luo C, Zhao Y, Cao Y et al. Effect of laser heat treatment on bending property of laser welded joints of low-alloy ultra-high strength steel[J]. Journal of Laser Applications, 31, 032011(2019).
[43] Wen P, Shan J G, Zheng S Q et al. Control of wire transfer behaviors in hot wire laser welding[J]. The International Journal of Advanced Manufacturing Technology, 83, 2091-2100(2016).
[44] Wen P, Feng Z H, Zheng S Q. Formation quality optimization of laser hot wire cladding for repairing martensite precipitation hardening stainless steel[J]. Optics & Laser Technology, 65, 180-188(2015).
[45] Wen P, Cai Z P, Feng Z H et al. Microstructure and mechanical properties of hot wire laser clad layers for repairing precipitation hardening martensitic stainless steel[J]. Optics & Laser Technology, 75, 207-213(2015).
[46] Peng W, Yang S. Numerical simulation and process optimization of laser surface treatment on duplex stainless steel[J]. Journal of Laser Applications, 30, 032504(2018).
[47] Zhang D, Wen P, Yin B Z et al. Temperature evolution, phase ratio and corrosion resistance of duplex stainless steels treated by laser surface heat treatment[J]. Journal of Manufacturing Processes, 62, 99-107(2021).
Get Citation
Copy Citation Text
Di Zhang, Lin Zhao, Aobo Liu, Peng Wen. Understanding and Controlling the Influence of Laser Energy on Penetration, Porosity, and Microstructure during Laser Welding[J]. Chinese Journal of Lasers, 2021, 48(15): 1502005
Category: laser manufacturing
Received: Dec. 28, 2020
Accepted: Apr. 9, 2021
Published Online: Aug. 2, 2021
The Author Email: Peng Wen (wenpeng@tsinghua.edu.cn)