[6] [6] MADIKA B, SYAHRIAL A Z. Study of aluminum/kevlar fiber composite laminate with and without TiC nanoparticle impregnation and aluminum/carbon fiber composite laminate for anti-ballistic materials[J]. International Journal of Lightweight Materials and Manufacture, 2024,7(1): 62-71.

[7] [7] XU J, TANG L, LIU Y, et al. Hybridization effects on ballistic impact behavior of carbon/ aramid fiber reinforced hybrid composite[J]. International Journal of Impact Engineering, 2023,181: 104750.

[8] [8] BAO Y J, HAO W, WANG Y Q, et al. Formation mechanism of burr defect in aramid fiber composites based on fly-cutting test[J]. The International Journal of Advanced Manufacturing Technology, 2019,104(1-4): 1531-1540.

[12] [12] AL-SULAIMAN F, YILBAS B S, KARAKAS F C, et al. Laser hole cutting in Kevlar: modeling and quality assessment[J]. The International Journal of Advanced Manufacturing Technology, 2008, 38(11-12): 1125.

[15] [15] GAUTAM G D, PANDEY A K. Teaching learning algorithm based optimization of kerf deviations in pulsed Nd∶YAG laser cutting of Kevlar-29 composite laminates[J]. Infrared Physics & Technology, 2018,89: 203-217.

[16] [16] MISHRA D R, BAJAJ A, BISHT R. Optimization of multiple kerf quality characteristics for cutting operation on carbon-basalt-Kevlar29 hybrid composite material using pulsed Nd: YAG laser using GRA[J]. CIRP Journal of Manufacturing Science and Technology, 2020, 30: 174-183.

[17] [17] PRAJAPATI A, NORKEY G, GAUTAM G D. Optimization of heat affected zone in laser cutting of Kevlar-29 fiber composite using hybrid response surface based grey wolf optimization (RSGWO) algorithm[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2022, 236(17): 9622-9638.

[19] [19] CHENG J, ZHANG P, HE Z, et al. Characteristics of ultrafast laser processing aramid fiber reinforced plastics[J]. Journal of Reinforced Plastics and Composites, 2022,41(23-24): 893-901.

[22] [22] KRGER J, KAUTEK W. Ultrashort pulse laser interaction with dielectrics and polymers[M]//LIPPERT T. Polymers and Light. Berlin, Heidelberg: Springer, 2004: 247-290.

[23] [23] WANG W, MEI X, JIANG G, et al. Effect of two typical focus positions on microstructure shape and morphology in femtosecond laser multi-pulse ablation of metals[J]. Applied Surface Science, 2008,255(5): 2303-2311.

[24] [24] LIU J M. Simple technique for measurements of pulsed Gaussian-beam spot sizes[J]. Optics Letters,1982,7(5): 196-198.

[25] [25] JEE Y, BECKER M F, WALSER R M. Laser-induced damage on single-crystal metal surfaces[J]. Journal of the Optical Society of America B,1988,5(3): 648-659.

[28] [28] BONSE J, RUDOLPH P, KRGER J, et al. Femtosecond pulse laser processing of TiN on silicon[J]. Applied Surface Science, 2000,154-155: 659-663.