[1] LIU Z Y, IKESUE A, LI J. Research progress and prospects of rare-earth doped sesquioxide laser ceramics[J]. Journal of the European Ceramic Society(2021).

[2] WANG J, ZHAO Y G, YIN D L et al. Holmium doped yttria transparent ceramics for 2-μm solid state lasers[J]. Journal of the European Ceramic Society(2018).

[3] MA Z Z, CHEN L, CHEN J et al. Fabrication of Y₂O₃ transparent ceramics by pressure-assisted alcoholic slip casting[J]. Ceramics International(2023).

[4] ZHANG L, YANG J, YU H Y et al. High performance of La- doped Y₂O₃ transparent ceramics[J]. Journal of Advanced Ceramics(2020).

[6] HARRIS D C, CAMBREA L R, JOHNSON L F et al. Properties of an infrared-transparent MgO:Y₂O₃ nanocomposite[J]. Journal of the American Ceramic Society(2013).

[7] LIU L H, MORITA K, SUZUKI T S et al. Synthesis of highly- infrared transparent Y₂O₃-MgO nanocomposites by colloidal technique and SPS.[J]. Ceramics International(2020).

[8] ABBASLOO M, SHOKROLLAHI H, ALHAJI A. Slip-casting process of MgO-Y₂O₃ nanocomposite: investigation of powder synthesis method[J]. Materials Chemistry and Physics(2020).

[9] MA H J, JUNG W K, BAEK C et al. Influence of microstructure control on optical and mechanical properties of infrared transparent Y₂O₃-MgO nanocomposite[J]. Journal of the European Ceramic Society(2017).

[10] XU S Q, LI J, LI C Y et al. Infrared-transparent Y₂O₃-MgO nanocomposites fabricated by the glucose Sol-Gel combustion and hot-pressing technique[J]. Journal of the American Ceramic Society(2015).

[11] FURUSE H, HORIUCHI N, KIM B N. Transparent non-cubic laser ceramics with fine microstructure[J]. Scientific Reports(2019).

[12] ITATANI K, TSUJIMOTO T, KISHIMOTO A. Thermal and optical properties of transparent magnesium oxide ceramics fabricated by post hot-isostatic pressing[J]. Journal of the European Ceramic Society(2006).

[13] LIU L K, ZHU Q H, ZHU Q Q et al. Fabrication of fine-grained undoped Y₂O₃ transparent ceramic using nitrate pyrogenation synthesized nanopowders[J]. Ceramics International(2019).

[14] YIN D L, WANG J, NI M et al. Fabrication of highly transparent Y₂O₃ ceramics with CaO as sintering aid[J]. Materials(2021).

[15] WANG J, YIN D L, MA J et al. Pump laser induced photodarkening in ZrO₂-doped Yb:Y₂O₃ laser ceramics[J]. Journal of the European Ceramic Society(2019).

[16] ZHU L L, PARK Y J, GAN L et al. Effects of ZrO₂-La₂O₃ co-addition on the microstructural and optical properties of transparent Y₂O₃ ceramics[J]. Ceramics International(2017).

[17] YI Q, ZHOU S M, TENG H et al. Structural and optical properties of Tm:Y₂O₃ transparent ceramic with La₂O₃, ZrO₂ as composite sintering aid.[J]. Journal of the European Ceramic Society(2012).

[18] LI X K, MAO X J, FENG M H et al. Optical absorption and mechanism of vacuum-sintered ZrO₂-doped Y₂O₃ ceramics[J]. Journal of the European Ceramic Society(2016).

[19] HOU X R, ZHOU S M, LI W J et al. Study on the effect and mechanism of zirconia on the sinterability of yttria transparent ceramic[J]. Journal of the European Ceramic Society(2010).

[20] CAO Y F, LI H Y, ZHENG X Y et al. Simultaneous precipitation of Zr⁴⁺ and Y³⁺ ions induced refinement of precursors and powders in fabrication of Zr⁴⁺ doped Y₂O₃ transparent ceramics[J]. Optical Materials(2023).

[21] WANG J W, ZHANG L C, CHEN D Y et al. Y₂O₃-MgO-ZrO₂ infrared transparent ceramic nanocomposites[J]. Journal of the American Ceramic Society(2012).

[22] LU K. Sintering of nanoceramics[J]. International Materials Reviews(2008).

[23] STANCIU G, VOICU F, BRANDUS C A et al. Enhancement of the laser emission efficiency of Yb:Y₂O₃ ceramics via multi-step sintering method fabrication[J]. Optical Materials(2020).

[24] ZHANG L, PAN W. Structural and thermo-mechanical properties of Nd:Y₂O₃ transparent ceramics[J]. Journal of the American Ceramic Society(2015).

[25] ZHOU H X, YANG Q H, XU J et al. Preparation and spectroscopic properties of 2%Nd:(Y_0.9La_0.1)₂O₃ transparent ceramics[J]. Journal of Alloys and Compounds(2009).

[26] CHEN P L, CHEN I W. Grain boundary mobility in Y₂O₃: defect mechanism and dopant effects[J]. Journal of the American Ceramic Society(1996).

[27] REN Y, LI X D, MU H J et al. The origin of microstructural inhomogeneity in vacuum-sintered ZrO₂‐doped Lu₂O₃ transparent ceramics[J]. Journal of the American Ceramic Society(2024).

[28] XU S Q, LI J, KOU H M et al. Spark plasma sintering of Y₂O₃-MgO composite nanopowder synthesized by the esterification Sol-Gel route[J]. Ceramics International(2015).

[29] XU S Q, LI J, LI C Y et al. Hot pressing of infrared-transparent Y₂O₃-MgO nanocomposites using Sol-Gel combustion synthesized powders[J]. Journal of the American Ceramic Society(2015).

[30] PERMIN D A, BOLDIN M S, BELYAEV A V et al. IR-transparent MgO-Y₂O₃ ceramics by self-propagating high-temperature synthesis and spark plasma sintering[J]. Ceramics International(2020).

[31] ZHANG L P, LIU Q, YU D Z et al. Effect of sintering process on the properties of transparent Al₂O₃[J]. Materials Science and Technology(2023).

[32] LU T C, CHANG X H, QI J Q et al. Low-temperature high- pressure preparation of transparent nanocrystalline MgAl₂O₄ ceramics[J]. Applied Physics Letters(2006).

[33] SHAHBAZI H, TATAEI M. Influence of porosity on transparency behavior of MgAl₂O₄ spinel, experiment vs Mie theory[J]. Optical Materials(2019).

[34] APETZ R. VAN BRUGGEN M P B. Transparent alumina: a light-scattering model[J]. Journal of the American Ceramic Society(2003).

[35] ZHAO X M, FANG Q L, XIA C J et al. Evaluation of pore scattering in transparent ceramics: a simplified model for nanometric spherical pores[J]. Journal of the American Ceramic Society(2023).

[36] YONG S M, CHOI D H, LEE K et al. Influence of the SPS heating rate on the optical and mechanical properties of Y₂O₃-MgO nanocomposites[J]. Journal of Ceramic Processing Research(2019).

[37] ZHANG R, ZHANG K, YUAN M Y et al. Nitrogen vacancy regulated lattice distortion on improvement of (NbMoTaW)N_x thin films: mechanical properties and wear resistance[J]. Journal of Inorganic Materials(2024).

[38] CHEN Z, HUANG Y, KOUTNÁ N et al. Large mechanical properties enhancement in ceramics through vacancy-mediated unit cell disturbance[J]. Nature Communications(2023).

[39] WANG P, WU Y, LIU J B et al. Impacts of atomic scale lattice distortion on dislocation activity in high-entropy alloys[J]. Extreme Mechanics Letters(2017).

[40] ZHU L L, LIU H L, LIN H T et al. Effects of ZrO₂ concentration on the properties of pressureless-sintered highly transparent Er₂O₃ ceramics[J]. Ceramics International(2023).

[41] LI C R, LI S, AN D et al. Microstructure and mechanical properties of spark plasma sintered SiC ceramics aided by B₄C[J]. Ceramics International(2020).