[1] [1] ZHAO X Y.Research on metal based ceramic composite coatings and the wear resistance prepared by laser cladding on H13 die steel［D］.Guangzhou: Jinan University, 2016.

[2] [2] KATTIRE P, PAUL S, SINGH R, et al.Experimental characterization of laser cladding of CPM 9V on H13 tool steel for die repair applications［J］.Journal of Manufacturing Processes, 2015(20): 492-499.

[3] [3] SONG B, VOISEY K T, HUSSAIN T.High temperature chlorine-induced corrosion of Ni50Cr coating: HVOLF, HVOGF, cold spray and laser cladding［J］.Surface & Coatings Technology, 2018(337): 357-369.

[4] [4] ZHANG R Z, LI L J, TANG M J, et al.Research Progress of Laser Cladding Technology［J］.Heat Treatment Technology and Equipment, 2017, 38(3): 7-11.

[5] [5] XIANG J, LI G, XU Y J, et al.Effect of Al2O3 on the Wear Resistance of Nickel-based Alloys Coating by Laser cladding［J］.Heat Treatment Technology and Equipment, 2009, 30(4): 6-10.

[6] [6] ZHAO X Y, LIU Y, XIA Y L, et al.Microstructure and wear resistance of TiC /Ni based alloy composite coatings on H13 steel by laser cladding［J］.Ansactions of Materials and Heat Treatment, 2016, 37(4): 190-196.

[7] [7] PHAM T H N, ZHANG X, WANG C, et al.Microstructure and mechanical properties of TiC/Co composite coating by laser cladding on H13 steel surfaces［J］.Transactions of the China Welding Institution, 2013, 34(11): 27-31.

[8] [8] LI Q, SONG G M, ZHANG Y Z, et al.Microstructure and dry sliding wear behavior of laser clad Ni-based alloy coating with the addition of SiC［J］.Wear, 2003, 254(3): 222-229.

[9] [9] ZANG C C, WANG Y Z, ZHANG Y D, et al.Microstructure and wear-resistant properties of NiCr-Cr3C2, coating with Ni45 transition layer produced by laser cladding［J］.Rare Metals, 2015, 34(7): 491-497.

[10] [10] ZHOU S, HUANG Y, ZENG X.A study of Ni-based WC composite coatings by laser induction hybrid rapid cladding with elliptical spot［J］.Applied Surface Science, 2008, 254(10): 3110-3119.

[11] [11] HUANG F X.An investigation on microstructure and properties of ni-based alloy by laser cladding and laser cladding and laser cladding forming［D］.Changchun: Jilin University, 2011.

[12] [12] REN C, LI Z G, SHU D, et al.Mictrostructure and Water Erosion Resistance Property of Stellite6 Coating by Laser Cladding on 17-4PH Stainless Steel Surface［J］.Chinese Journal of Laser, 2017(4): 101-108.

[13] [13] FENG X D. Research on the Microstructure and Corrosion Resistance of Ni-Based Alloy Coatings by Laser Cladding on the Soft Steel［D］.Jiaozuo: Henan Polytechnic University, 2011.

[14] [14] SHANGGUAN X C, ZHAO Y C, XU Y, et al.Effect of laser power on tribological properties of WC particles reinforced iron-based composite coating［J］.Metal Heat Treatment, 2018(3): 56-61.

[15] [15] ZHEN C.Study of NiCr/Cr3C2-WS2 High-temperature Self-lubricating Wear-resistant Composite Coatings［D］.Suzhou: Suzhou University, 2013.

[16] [16] YANG Y, ZHANG D, YAN W, et al.Microstructure and wear properties of TiCN/Ti coatings on titanium alloy by laser cladding［J］.Optics & Lasers in Engineering, 2010, 48(1): 119-124.

[17] [17] CHO J, XIONG Y, KIM J, et al.Tribological behavior of NiCr-base blended and nanostructured composite APS coatings by rig test［J］.Wear, 2008, 265(11-12): 1565-1571.

[18] [18] YAO S.Friction and wear behaviors and high-temperature oxidation resistance of in-situ TiC particle reinforced cladding coating［D］.Kunming: Kunming University of Science and Technology, 2014.

[19] [19] XIAO X, YIN Y, BAO J, et al.Review on the friction and wear of brake materials［J］.Advances in Mechanical Engineering, 2016, 8(5): 1-10.

[20] [20] HAN B, WANG S, ZHANG M K, et al.Wear properties and microstructure of Ni-based cermet layer by laser cladding［J］.Journal of China University of Petroleum(Edtion of Natural Science), 2015, 39(2): 93-97.