[1] [1] GAO Y G, ZHANG Q, SHI Y L,et al.. Structure design of precise displacement platform without guiding apparatus［J］. Opt. Precision Eng., 2009,17(9): 2199-2205. (in Chinese)

[2] [2] WANG SH H, CHEN Y R, WANG SH ZH,et al.. Design of 3D precision displacement system［J］. Opt. Precision Eng., 2010,18(1): 175-182.(in Chinese)

[3] [3] ZHOU W W, HE G P. Optimizing flexure hinges of a planar full compliant parallel mechanism［J］. J.North China Univ. of Tech., 2007,19(1): 20-27. (in Chinese)

[4] [4] DAI R, XIE T B. Design and analysis of 1-DOF nano-positioning stage［J］. Opt. Precision Eng., 2006,14(3): 428-433. (in Chinese)

[5] [5] ZHANG Q,WANG H K,FAN Y X. Research on design of two dimension micro-displacement mechanism of precise worktable［J］. Modular Machine Tool & Automatic Manufacturing Technique, 2002,(10): 26-28. (in Chinese)

[6] [6] ZONG G H,PEI X,YU J J,et al.. Novel compliant linear guiding mechanism and analysis of kinetic precision［J］. Opt. Precision Eng., 2008,16(4): 630-635. (in Chinese)

[7] [7] ZHANG L, LIU Y. Design of micro-displacement mechanism based on flexure hinges［J］. Machine Tool & Hydraulics, 2010,38(5): 87-89. (in Chinese)

[8] [8] ZHANG J X,SUN B Y. Design and analysis of 2-DOF nanopositoning stage based on dual flexure hinges［J］. Piezoelectrics & Acoustooptics, 2006,28(5): 624-626. (in Chinese)

[9] [9] ZHU R SH. Design and calculation of a novel 2-DOF micro-motion workstage［J］. Journal of HeFei University of Technology, 2008,31(10): 1585-1589. (in Chinese)

[10] [10] YANG X F, LI W,WANG Y Q,et al.. Output displacement analysis of single parallel four-Bar mechanism with right angle flexure hinge［J］. Nanotechnology and Precision Engineering, 2009,7(4): 346-350. (in Chinese)

[11] [11] WU X Q, YU T X. Analysis of the entire process of large deflection of an elastic-plastic cantilever［J］. Acta Mechnaica Sinica, 1986,18(6): 516-527. (in Chinese)

[12] [12] YE X, ZHANG ZH J,WAN B L,et al.. Error sources analysis of micro-motion platform［J］. Journal of Mechanical Engineering, 2009,45(1): 258-266. (in Chinese)

[13] [13] MAO Y T. Deviation Theory and Accuracy Analysis［M］. Beijing: Defense Industry Press,1982. (in Chinese)

[14] [14] ZHANG SH J. Measure Deviation and Data Analysis［M］. Beijing: Science Press,1979. (in Chinese)

[15] [15] DONG J H, XU H. Error analysis on the X-Y table in automatic gold wire bonder［J］. Opt. Precision Eng., 2005,13(Supp.): 148-152. (in Chinese)