[1] [1] Rouzbahani R, Pobedinskas P, Donatini F, Wong D, Pernot J and Haenen K 2024 Controlled boron content in lightly B-doped single crystal diamond films by variation of methane concentration Carbon221 118923

[2] [2] Yan B, Chen N, Xu C, Wu Y, Li L, Lee C and He N 2024 Covalently bonded heterostructures with mixed-dimensional carbons for suppressing mechanochemical wear of diamond under heavy loads ACS Appl. Mater. Interfaces16 19751–63

[3] [3] Chen N, Li H N, Wu J M, Li Z J, Li L, Liu G Y and He N 2021 Advances in micro milling: from tool fabrication to process outcomes Int. J. Mach. Tools Manuf.160 103670

[4] [4] Zhao G L, Zhao B, Ding W F, Xin L J, Nian Z W, Peng J H, He N and Xu J H 2024 Nontraditional energy-assisted mechanical machining of difficult-to-cut materials and components in aerospace community: a comparative analysis Int. J. Extrem. Manuf.6 022007

[5] [5] Fan S Y, Lin S S, Su Y F, Shi Q, Dai M J, Xiao S and Kuang T C 2023 Various HFCVD diamond coatings synergistically tuned using CH4 gas flow and working pressure and key merit evaluation of their coated tools Int. J. Refract. Met. Hard Mater.114 106234

[6] [6] Sousa V F C and Silva F J G 2020 Recent advances on coated milling tool technology—a comprehensive review Coatings10 235

[7] [7] Yan B, He N, Chen N, Chen H, Sun S, Wu Y, Li L and Lee C 2024 Improving frictional state at fretting interfaces through the covalent structure of diamond–graphite–graphene Tribol. Int.198 109890

[8] [8] Handschuh-Wang S, Wang T and Tang Y B 2021 Ultrathin diamond nanofilms—development, challenges, and applications Small17 2007529

[9] [9] Peng J H, Zeng J W, Xiong C and Li L J 2020 The effect of interlayer reactivity on the quality of diamond coating by HFCVD deposition J. Alloys Compd.835 155035

[10] [10] Wang H, Song X, Wang X C and Sun F H 2021 Fabrication, tribological properties and cutting performances of high-quality multilayer graded MCD/NCD/UNCD coated PCB end mills Diam. Relat. Mater.118 108505

[11] [11] Li Z, Jiang F, Jiang Z Y, Tian Z G, Qiu T, Zhang T, Wen Q L, Lu X Z, Lu J and Huang H 2024 Energy beam-based direct and assisted polishing techniques for diamond: a review Int. J. Extrem. Manuf.6 012004

[12] [12] Luo H, Ajmal K M, Liu W, Yamamura K and Deng H 2021 Polishing and planarization of single crystal diamonds: state-of-the-art and perspectives Int. J. Extrem. Manuf.3 022003

[13] [13] Katamune Y, Murasawa K, Yoshitake T, Kikuchi T, Imokawa K and Ikenoue H 2023 Low-volume-loss surface polishing with a krypton fluoride excimer laser for polycrystalline diamond films Appl. Phys. Lett.123 031604

[14] [14] Prieske M and Vollertsen F 2021 Picosecond-laser polishing of CVD-diamond coatings without graphite formation Mater. Today Proc.40 1–4

[15] [15] Yan B, Chen N, He N, Wu Y, Zhang X L and Li L 2021 Surface modeling and component analysis of picosecond laser ablation of CVD diamond Diam. Relat. Mater.111 108191

[16] [16] Okamoto Y, Okubo T, Kajitani A and Okada A 2022 High-quality micro-shape fabrication of monocrystalline diamond by nanosecond pulsed laser and acid cleaning Int. J. Extrem. Manuf.4 025301

[17] [17] Pimenov S M et al 1996 Tribological properties of smooth diamond films Appl. Surf. Sci.92 106–14

[18] [18] Zhang D C, Shen B and Sun F H 2010 Study on tribological behavior and cutting performance of CVD diamond and DLC films on Co-cemented tungsten carbide substrates Appl. Surf. Sci.256 2479–89

[19] [19] Vandenbulcke L and De Barros M I 2001 Deposition, structure, mechanical properties and tribological behavior of polycrystalline to smooth fine-grained diamond coatings Surf. Coat. Technol.146–147 417–24

[20] [20] Bhushan B, Subramaniam V V, Malshe A, Gupta B K and Ruan J 1993 Tribological properties of polished diamond films J. Appl. Phys.74 4174–80

[21] [21] Chen S L, Lin Q, Ji Z, Sun Z Z and Shen B 2023 Ultrahigh mechanical robustness of vertical graphene sheets covalently bonded to diamond Carbon201 390–8

[22] [22] Chen S L, Shen B and Sun F H 2017 The influence of normal load on the tribological performance of electrophoretic deposition prepared graphene coating on micro-crystalline diamond surface Diam. Relat. Mater.76 50–57

[23] [23] Yuan Q L, Lin C T and Chee K W A 2019 All-carbon devices based on sp2-on-sp3 configuration APL Mater.7 030901

[24] [24] Won M S, Penkov O V and Kim D E 2013 Durability and degradation mechanism of graphene coatings deposited on Cu substrates under dry contact sliding Carbon54 472–81

[25] [25] Ji Z, Lin Q, Huang Z W, Chen S L, Gong P, Sun Z Z and Shen B 2021 Enhanced lubricity of CVD diamond films by in-situ synthetization of top-layered graphene sheets Carbon184 680–8

[26] [26] Smith P J, Chu B Y, Singh E, Chow P, Samuel J and Koratkar N 2015 Graphene oxide colloidal suspensions mitigate carbon diffusion during diamond turning of steel J. Manuf. Process.17 41–47

[27] [27] Chu B Y, Shi Y F and Samuel J 2016 Mitigation of chemical wear by graphene platelets during diamond cutting of steel Carbon108 61–71

[28] [28] Yan B et al 2023 Instantaneous formation of covalently bonded diamond–graphite–graphene with synergistic properties Int. J. Mach. Tools Manuf.193 104087

[29] [29] Komlenok M S, Kononenko V V, Ralchenko V G, Pimenov S M and Konov V I 2011 Laser induced nanoablation of diamond materials Phys. Proc.12 37–45

[30] [30] Kononenko V V, Konov V I, Pimenov S M, Prokhorov A M, Pavelyev V S, Soifer V A, Luedge B and Duparre M R 2002 Laser shaping of diamond for IR diffractive optical elements Proc. SPIE4426 128–34

[31] [31] Kang X Y, Lin N, He Y H, Zhang Q K, Zhang M M, Yan Y and Liu Y 2021 Improvement of microstructure, mechanical properties and cutting performance of Ti(C,N)-based cermets by ultrafine La2O3 additions Ceram. Int.47 19934–44

[32] [32] Sader J E, Chon J W M and Mulvaney P 1999 Calibration of rectangular atomic force microscope cantilevers Rev. Sci. Instrum.70 3967–9

[33] [33] Kononenko V V, Kononenko T V, Pimenov S M, Sinyavskii M N, Konov V I and Dausinger F 2005 Effect of the pulse duration on graphitisation of diamond during laser ablation Quantum Electron.35 252

[34] [34] Mei L F, Chen G Y, Zhang B, Chen G G and Huang K 2009 Measurement of YAG laser absorptance by artificial diamond and cubic boron nitride Opt. Laser Technol.41 770–7

[35] [35] Xie Y, Sengupta M, Habte A and Andreas A 2022 The “Fresnel equations” for diffuse radiation on inclined photovoltaic surfaces (FEDIS) Renew. Sustain. Energy Rev.161 112362

[36] [36] Rungasamy A E, Craig K J and Meyer J P 2021 A review of linear Fresnel primary optical design methodologies Sol. Energy224 833–54

[37] [37] Kononenko T V, Konov V I, Garnov S V, Klimentov S M and Dausinger F 2001 Dynamics of deep short pulse laser drilling: ablative stages and light propagation Laser Phys.11 343–51

[38] [38] Ferrari A C et al 2006 Raman spectrum of graphene and graphene layers Phys. Rev. Lett.97 187401

[39] [39] Chen N, Zhao J Y, Wang R K, Yan B, Wu Y, Li L, Yu N and He N 2024 Inhibition effect of covalent carbon nanosheets on mechanochemical wear of diamond Mater. Des.237 112573

[40] [40] Yuan S, Guo X G, Mao Q, Guo J, Van Duin A C T, Jin Z J, Kang R K and Guo D M 2021 Effects of pressure and velocity on the interface friction behavior of diamond utilizing ReaxFF simulations Int. J. Mech. Sci.191 106096

[41] [41] Chen S L, Shen B, Chen Y S and Sun F H 2017 Synergistic friction-reducing and anti-wear behaviors of graphene with micro- and nano-crystalline diamond films Diam. Relat. Mater.73 25–32

[42] [42] Chen S L, Shen B and Sun F H 2016 Enhanced tribological performance of CVD diamond films enabled by using graphene layers as solid lubricant Adv. Mater. Res.1136 573–8

[43] [43] Shen B, Hong H, Chen S L, Chen X and Zhang Z N 2019 Cathodic electrophoretic deposition of magnesium nitrate modified graphene coating as a macro-scale solid lubricant Carbon145 297–310

[44] [44] Shen B, Chen S L, Chen Y S and Sun F H 2017 Enhancement on the tribological performance of diamond films by utilizing graphene coating as a solid lubricant Surf. Coat. Technol.311 35–45

[45] [45] Bhowmick S, Banerji A and Alpas A T 2016 Friction reduction mechanisms in multilayer graphene sliding against hydrogenated diamond-like carbon Carbon109 795–804

[46] [46] Huang P, Qi W, Yin X, Choi J, Chen X C, Tian J S, Xu J X, Wu H C and Luo J B 2019 Ultra-low friction of a-C:H films enabled by lubrication of nanodiamond and graphene in ambient air Carbon154 203–10

[47] [47] Liu Y F, Li J J, Chen X C and Luo J B 2019 Fluorinated Graphene: a promising macroscale solid lubricant under various environments ACS Appl. Mater. Interfaces11 40470–80

[48] [48] Yin X, Wu F, Chen X C, Xu J X, Wu P, Li J J, Zhang C H and Luo J B 2020 Graphene-induced reconstruction of the sliding interface assisting the improved lubricity of various tribo-couples Mater. Des.191 108661

[49] [49] Kim K S, Lee H J, Lee C, Lee S K, Jang H, Ahn J H, Kim J H and Lee H J 2011 Chemical vapor deposition-grown graphene: the thinnest solid lubricant ACS Nano5 5107–14

[50] [50] Marchetto D, Held C, Hausen F, Whlisch F, Dienwiebel M and Bennewitz R 2012 Friction and wear on single-layer epitaxial graphene in multi-asperity contacts Tribol. Lett.48 77–82

[51] [51] Berman D, Deshmukh S A, Sankaranarayanan S K R S, Erdemir A and Sumant A V 2014 Extraordinary macroscale wear resistance of one atom thick graphene layer Adv. Funct. Mater.24 6640–6

[52] [52] Matsumura K, Chiashi S, Maruyama S and Choi J 2018 Macroscale tribological properties of fluorinated graphene Appl. Surf. Sci.432 190–5

[53] [53] Huang Y H, Li Q Y, Zhang J, Qi Y Z, Wang H T, Zhao P and Meng Y G 2020 Effect of airborne contaminants on the macroscopic anti-wear performance of chemical vapor deposition graphene Surf. Coat. Technol.383 125276

[54] [54] Sun Y, Kandan K, Shivareddy S, Farukh F and Bailey R 2019 Effect of sliding conditions on the macroscale lubricity of multilayer graphene coatings grown on nickel by CVD Surf. Coat. Technol.358 247–55

[55] [55] Wu P, Li X M, Zhang C H, Chen X C, Lin S Y, Sun H Y, Lin C T, Zhu H W and Luo J B 2017 Self-assembled graphene film as low friction solid lubricant in macroscale contact ACS Appl. Mater. Interfaces9 21554–62

[56] [56] Liang H Y, Bu Y F, Zhang J Y, Cao Z Y and Liang A M 2013 Graphene oxide film as solid lubricant ACS Appl. Mater. Interfaces5 6369–75

[57] [57] Jiang G, Jianguo Z, Yanan P, Renke R K, Yoshiharu N, Paul S, Xiaobin Y, Baorui W and Dongming G 2020 A critical review on the chemical wear and wear suppression of diamond tools in diamond cutting of ferrous metals Int. J. Extrem. Manuf.2 012001

[58] [58] Wang J P, Zhang G Q, Chen N, Zhou M H and Chen Y B 2021 A review of tool wear mechanism and suppression method in diamond turning of ferrous materials Int. J. Adv. Manuf. Technol.113 3027–55

[59] [59] Komanduri R and Shaw M C 1975 Wear of synthetic diamond when grinding ferrous metals Nature255 211–3

[60] [60] Zeiler E, Klaffke D, Hiltner K, Grgler T, Rosiwal S M and Singer R F 1999 Tribological performance of mechanically lapped chemical vapor deposited diamond coatings Surf. Coat. Technol.116–119 599–608