[1] [1] POOLE S B, PAYNE D N, FERMANN M E. Fabrication of low-loss optical fibres containing rare-earth ions［J］. Electronics Letters, 1985, 17(21): 737-738.

[2] [2] LIU Sh Sh, ZHANG L, WEI H M, et al. Study on amplification of ring-core erbium-doped vortex fibers［J］. Chinese Journal of Lasers,2023,50(10):1006003(in Chinese).

[3] [3] ZHANG B, ZHANG E T, HU X Ch, et al. Amplification characteristics of multiwavelength erbium-doped fiber laser amplifiers［J］. Laser Technology, 2018, 42(3): 325-330(in Chinese).

[4] [4] HAO Y Q, JIA R Y, DING B B, et al. Research of optimized wide-bandwidth optical source with Er3+-doped fiber amplified spontaneous emission［J］.Laser Technology, 2023,47(4):500-505(in Chin-ese).

[5] [5] OU P, CAO B, ZHANG Ch X, et al. Analysis of mean-wavelength stability of Er-doped super fluorescent fiber sources［J］. Laser & Optoelectronics Progress, 2008，45(5): 26-30(in Chinese).

[6] [6] GUILLAUMOND D, MEUNIER J P. Comparison of two flattening techniques on a double-pass erbium-doped superfluorescent fiber source for fiber-optic gyroscope［J］. IEEE Journal of Selected Topics in Quantum Electronics, 2001, 7(1): 17-21.

[7] [7] QIU J L, WANG L, HUANG T Ch, et al. Review of development of interferometric fiber-optic gyroscopes［J］. Acta Optica Sinica, 2022, 42(17): 1706004(in Chinese).

[8] [8] SODERLUND M, TAMMELA S, HOFFMAN H J, et al. Direct nano-particle deposition builds active fibers［J］. Laser Focus World, 2006, 42(1): 103-111.

[9] [9] TAMMELA S, KIIVERI P, SARKILAHTI S, et al. Direct nanoparticle deposition process for manufacturing very short high gain Er-doped silica glass fibers［C］//2002 28th European Conference on Optical Communication. New York, USA: IEEE, 2002: 1-2.

[10] [10] KIR′YANOV A V, BARMENKOV Y O, SANDOVAL-ROMERO G E, et al. Er3+ concentration effects in commercial erbium-doped silica fibers fabricated through the MCVD and DND technologies［J］. IEEE Journal of Quantum Electronics, 2013, 49(6): 511-521.

[11] [11] FU Y J, JIAN W, ZHENG K, et al. Refractive index control in fabrication of erbium doped fiber［J］.Chinese Journal of Lasers, 2006, 33(3): 347-350(in Chinese).

[12] [12] CHENG Y Sh. The research on erbium-doped and erbium-ytterbium co-doped fibers for 1.5 μm fiber laser［D］. Wuhan: Huazhong University of Science & Technology, 2020: 45-58(in Chinese).

[13] [13] GAO Y M, FENG G, LIU Y J, et al. Manufacture of erbium-doped optica fiber［J］. Infrared and Laser Engineering, 2009, 38(3): 515-519(in Chinese).

[14] [14] YANG Q, JIAO Y, YU C, et al. Gain and laser performance of heavily Er-doped silica fiber fabricated by MCVD combined with the sol-gel method［J］. Chinese Optics Letters, 2021, 19(11): 110603.

[15] [15] BISWAS A, MACIEL G S, KAPOOR R, et al. Er3+-doped multicomponent sol-gel-processed silica glass for optical signal amplification at 1.5 μm［J］. Applied Physics Letters, 2003, 82(15): 2389-2391.

[16] [16] LIU Zh M. Study and fabrication of single mode large-mode-diameter high concentration erbium doped fibers and related device［D］. Beijing: Beijing Jiaotong University, 2012: 59-91(in Chinese).

[17] [17] GU Zh M, CHU Y B, LI H Q, et al. Fabrication and amplification characteristics of multicore erbium-doped fiber［J］. Chinese Journal of Lasers, 2022, 49(9): 0906003(in Chinese).

[18] [18] HE L, CHU Y B, DAI N L, et al. Silicate-based erbium-doped fiber extended to L-band and its amplification performance［J］. Acta Physica Sinica, 2022, 71(15): 154204(in Chinese).

[19] [19] LENARDIC B, KVEDER M. Advanced vapor-phase doping method using chelate precursor for fabrication of rare earth-doped fibers［C］//2009 Optical Fiber Communication Conference. New York， USA: IEEE, 2009: 1538-1540.

[20] [20] ANUAR K, MUHD-YASIN S Z, ZULKIFLI M I, et al. Er2O3-Al2O3 doped silica preform prepared by MCVD-chelate vapor phase delivery technique［J］. Advanced Materials Research, 2014, 896: 219-224.

[21] [21] SAHA M, PAL A, SEN R. Vapor phase doping of rare-earth in optical fibers for high power laser［J］. IEEE Photonics Technology Le-tters, 2014, 26(1): 58-61.

[22] [22] XU H J, DU S H. Temperature dependence of absorption and emi-ssion cross sections in erbium-doped fibers［J］. Laser & Optoelectronics Progress, 2014, 51(10): 100601(in Chinese).