[1] [1] J.-P. Kruth,G. Levy,F. Klocke et al.. Consolidation phenomena in laser and powder-bed based layered manufacturing [J]. CIRP Annals-Manufacturing Tech.,2007,56:730-759

[2] [2] F. Abe,K. Osakada,M. Shiomi et al.. The manufacturing of hard tools from metallic powders by selective laser melting [J]. J. Mater. Process. Tech.,2001,111(1-3):210-213

[3] [3] W. Meiners,K. Wissenbach,A. Gasser. Selective laser sintering at melting temperature[P]. U.S. 6,215,093,1996

[4] [4] G. N. Levy,R. Schindel,J. P. Kruth. Rapid manufacturing and rapid tooling with layer manufacturing technologies,state of the art and future perspectives [J]. CIRP Annals-Manufacturing Tech.,2003,52(2):589-609

[5] [5] Ruidi Li,Yusheng Shi,Jinhui Liu et al.. Effects of processing parameters on the temperature field of selective laser melting metal powder [J]. Powder Metallurgy and Metal Ceramics,2009,48(3):186-195

[6] [6] K. Osakada,M. Shiomi. Flexible manufacturing of metallic products by selective laser melting of powder [J]. Int. J. Mach. Tools Manuf.,2006,46(11):1188-1193

[7] [7] http://www.mtt-group.com/selective-laser-melting.html

[8] [8] R. Morgan,C. J. Sutcliffe,W. O'Neill. Density analysis of direct metal laser re-melted 316L stainless steel cubic primitives [J]. J. Mater. Sci.,2004,39:1195-1205

[9] [9] W. M. Steen. Laser Material Processing[M]. London:Springer-Verlag,1991. 85,191

[10] [10] H. H. Zhu,J. Y. H. Fuh,L. Lu. The influence of powder apparent density on the density in direct laser-sintered metallic parts [J]. Int. J. Machine Tools & Manufacture,2007,47:294-298

[11] [11] J.-P. Kruth,B. Van der Schueren,J. E. Bonse et al.. Basic powder metallurgical aspects in selective metal powder sintering [J]. CIRP Annals-Manufacturing Tech.,1996,45(1):183-186

[12] [12] M. Rajabi,A. Simchi,M. Vahidi et al.. Effect of particle size on the microstructure of rapidly solidified Al-20Si-5Fe-2X (X = Cu,Ni,Cr) powder [J]. J. Alloys and Compounds,2008,466:111-118

[13] [13] G. E. Dieter. Mechanical Metallurgy [M]. Third ed.. New York:McGraw-Hill Book,1986. 189-190

[14] [14] A. Simchi. Direct laser sintering of metal powders:Mechanism,kinetics and microstructural features [J]. Mater. Sci. Eng. A,2006,428:148-158

[15] [15] D. L. Bourell. Rapid Manufacturing:An Industrial Revolution for the Digital Age[M]. N. Hopkinson. R. J. M. Hague and P. M. Dickens. West Sussex:John Wiley & Sons Ltd.,2006. 81-83

[16] [16] M. Rombouts,J. P. Kruth,L. Froyen et al.. Fundamentals of selective laser melting of alloyed steel powders [J]. CIRP Annals-Manufacturing Tech.,2006,55(1):187-192

[17] [17] M. Matsumoto,M. Shiomi,K. Osakada et al.. Finite Element Analysis of Single Layer Forming on Metallic Powder Bed in Rapid Prototyping by Selective Laser Processing [J]. Int. J. Machine Tools and Manufacture,2002,42(1):61-67

[18] [18] D. D. Gu,Y. F. Shen,J. L. Yang et al.. Effects of processing parameters on direct laser sintering of multicomponent Cu based metal powder [J]. Mater. Sci. Tech.,2006,22:1449-1455

[19] [19] L. Hao,M. M. Savalani,Y. Zhang et al.. Selective laser sintering of hydroxyapatite reinforced polyethylene composites for bioactive implants and tissue scaffold development [J]. Proc. IMechE Part H,J. Eng. Medicine,2006,220:521-531

[20] [20] L. Hao,S. Dadbakhsh,O. Seaman et al.. Selective Laser Melting of a Stainless Steel and Hydroxyapatite Composite for Load-Bearing Implant Development [J]. J. Mater. Process. Tech.,2009,209(17):5793-5801

[21] [21] P. Mercelis,J.-P. Kruth. Residual stresses in selective laser sintering and selective laser melting [J]. Rapid Prototyping J.,2006,12(5):254-265

[22] [22] A. Simchi. The role of particle size on the laser sintering of iron powder [J]. Metal. Mater. Trans. B,2004,35(5):937-948

[23] [23] A. Simchi,H. Pohl. Effects of laser sintering processing parameters on the microstructure and densification of iron powder [J]. Mater. Sci. Eng. A,2003,359:119-128

[24] [24] H. J. Niu,I. T. H. Chang. Liquid phase sintering of M3/2 high speed steel by selective laser sintering [J]. Scripta Mater.,1998,39(1):67-72

[25] [25] J. W. Xie,P. Fox,W. O’Neill et al.. Effect of direct laser re-melting processing parameters and scanning strategies on the densification of tool steels [J]. J. Mater. Process. Tech.,2005,170(3):516-523

[26] [26] Laser Institute of America. LIA Handbook of Laser Materials Processing[M]. John F. Ready,Dave F. Farson (Editors),USA:Laser Institute of America-Magnolia Publishing Inc.,2001. 3,174

[27] [27] X. C. Li,J. Stampfl,F. B. Prinz. Mechanical and thermal expansion behavior of laser deposited metal matrix composites of Invar and TiC [J]. Mater. Sci. Eng. A,2000,282:86-90

[28] [28] A. H. Nickel,D. M. Barnett,F. B. Prinz. Thermal stresses and deposition patterns in layered manufacturing [J]. Mater. Sci. Eng. A,2001,317:59-64

[29] [29] S. Dadbakhsh,L. Hao,N. Sewell. A test procedure for mechanical qualification of additive layer manufacturing parts[C]. Proceedings of the 10th National Conference on Rapid Design,Prototyping and Manufacturing,2009. 53-61

[30] [30] Campbell J. Castings[M]. Oxford:Elsevier,2003

[31] [31] ASM Handbook. Powder Metal Technologies and Applications[M],Volume 7,ASM International,1998

[32] [32] M. Asta,C. Beckermann,A. Karma et al.. Solidification microstructures and solid-state parallels:Recent developments,future directions [J]. Acta Mater.,2009,57(4):941-971

[33] [33] M. F. Ashby. Materials Selection in Mechanical Design[M]. 3rd Edition,Elsevier:Butterworth-Heinemann,2005. 180-182

[34] [34] P. Fox,S. Pogson,C. J. Sutcliffe et al.. Interface interactions between porous titanium/tantalum coatings,produced by Selective Laser Melting (SLM),on a cobalt-chromium alloy [J]. Surface and Coatings Tech.,2008,202(20):5001-5007

[35] [35] F. Klocke,C. Wagner. Coalescence behaviour of two metallic particles as base mechanism of selective laser sintering [J]. CIRP Annals-Manufacturing Tech.,2003,52(1):177-184

[36] [36] J. P. Kruth,L. Froyen,J. Van Vaerenbergh et al.. Selective laser melting of iron-based powder [J]. J. Mater. Process. Tech.,2004,149(1-3):616-622

[37] [37] M. Shiomi,K. Osakada,K. Nakamura et al.. Residual Stress within Metallic Model Made by Selective Laser Melting Process [J]. CIRP Annals-Manufacturing Tech.,2004,53(1):195-198

[38] [38] M. Badrossamay,T. H. C. Childs. Further studies in selective laser melting of stainless and tool steel powders [J]. Int. J. Machine Tools and Manufacture,2007,47(5):779-784

[39] [39] P. G. E. Jerrard,L. Hao,K. E. Evans. Experimental investigation into selective laser melting of austenitic and martensitic stainless steel powder mixtures [J]. Proc. IMechE Part B:J. Eng. Manufacture,in Press

[40] [40] B. Vandenbroucke,J.-P. Kruth. Selective laser melting of biocompatible metals for rapid manufacturing of medical parts [J]. Rapid Prototyping J.,2007,13(4):196-203

[41] [41] A. T. Clare,P. R. Chalker,S. Davies et al.. Selective laser melting of high aspect ratio 3D nickel-titanium structures two way trained for MEMS applications [J]. Int. J. Mechanics and Materials in Design,2008,4(2):181-187

[42] [42] K. A. Mumtaz,P. Erasenthiran,N. Hopkinson. High density selective laser melting of Waspaloy [J]. J. Mater. Process. Tech.,2008,195(1-3):77-87

[43] [43] E. C. Santos,K. Osakada,M. Shiomi et al.. Microstructure and mechanical properties of pure titanium models fabricated by selective laser melting [J]. Proc. IMechE Part C:J. Mechanical Eng. Sci.,2004,218(7):711-719

[44] [44] P. Jerrard,L. Hao,K. E. Evans. Selective laser melting of pure aluminium powder - A preliminary study[C]. Proceedings of the 10th National Conference on Rapid Design,Prototyping and Manufacturing,2009. 45-52

[45] [45] M. Wong,S. Tsopanos,C. J. Sutcliffe et al.. Selective laser melting of heat transfer devices [J]. Rapid Prototyping J.,2007,13(5):291-297

[46] [46] A. Simchi,H. Pohl. Direct laser sintering of iron-graphite powder mixture [J]. Mater. Sci. Eng. A,2004,383(2):191-200

[47] [47] Dongdong Gu,Yifu Shen. Processing and microstructure of submicron WC-Co particulate reinforced Cu matrix composites prepared by direct laser sintering [J]. Mater. Sci. Eng. A,2006,435A-436A:54-61

[48] [48] Dongdong Gu,Yifu Shen,Long Zhao et al.. Effect of rare earth oxide addition on microstructures of ultra-fine WC-Co particulate reinforced Cu matrix composites prepared by direct laser sintering [J]. Mater. Sci. Eng. A,2007,445A-446A:316-322

[49] [49] A. Grd,P. Krakhmalev,J. Bergstrm. Microstructural characterization and wear behavior of (Fe,Ni)-Ti MMC prepared by DMLS [J]. J. Alloys and Compounds,2006,421(1-2):166-171

[50] [50] S. Kumar,J. -P. Kruth. Composites by rapid prototyping technology [J]. Materials & Design,in Press

[51] [51] C. C. Leong,L. Lu,J. Y. H. Fuh et al.. In-situ formation of copper matrix composites by laser sintering [J]. Mater. Sci. Eng. A,2002,338(1-2):81-88

[52] [52] L. Lu,J. Y. H. Fuh,Z. D. Chen et al.. In situ formation of TiC composite using selective laser melting [J]. Mater. Research Bulletin,2000,35(9):1555-1561

[53] [53] A. Slocombe,L. Li. Selective laser sintering of TiC-Al2O3 composite with self-propagating high-temperature synthesis [J]. J. Mater. Process. Tech.,2001,118(1-3):173-178

[54] [54] Dongdong Gu,Zhiyang Wang,Yifu Shen et al.. In-situ TiC particle reinforced Ti-Al matrix composites:Powder preparation by mechanical alloying and Selective Laser Melting behavior [J]. Applied Surface Science,2009,255(22):9230-9240

[55] [55] Dongdong Gu,Yifu Shen,Guangbin Meng. Growth morphologies and mechanisms of TiC grains during Selective Laser Melting of Ti-Al-C composite powder [J]. Materials Letters,in Press

[56] [56] Dongdong Gu,Yifu Shen,Zhijian Lu. Preparation of TiN-Ti5Si3 in-situ composites by selective laser melting [J]. Materials Letters,2009,63(18-19):1577-1579

[57] [57] S. Dadbakhsh,L. Hao,N. Sewell et al.. Direct fabrication of an in-situ Al composite using selective laser melting process [C]. Innovative Developments in Design and Manufacturing:Advanced Research in Virtual and Rapid Prototyping - Proceedings of VR@P4,Oct. 2009