[1] [1] Cao Rui, Zhang Bin, Feng Qibo et al.. A method for roll-angle measurement in multi-degree-of-freedom measuring system［J］. Acta Optica Sinica, 2008, 28(12): 2344～2348

[2] [2] Zhu Jia, Li Xingfei, Tan Wenbin et al.. Method of geometric error detection for measuring machine based on laser interfereometer［J］. Journal of Mechanical Engineering, 2010, 46(10): 25～30

[3] [3] Tong Hengchao, Yang Jianguo, Liu Guoliang et al.. Homogeneous transformation modeling for volumetric errors of a machine tool guiedway system and its application［J］. Journal of Shanghai Jiao Tong University, 2005, 39(9): 1400～1403

[4] [4] Jae Ha Lee, Yu Liu, Seung-Han Yang. Accuracy improvement of miniaturized machine tool: geometric error modeling and compensation［J］. International Journal of Machine Tools & Manufacture, 2006, 46(12): 1508～1516

[5] [5] Ren Yongqiang, Yang Jianguo. Study on decoupling of synthesis error compensation for a 5-axis CNC machine tool［J］. Journal of Mechanical Engineering, 2004, 40(2): 55～59

[6] [6] Liang Jing, Long Xingwu, Zhang Bin et al.. Absolute distance measurement by using 117 μm synthetic wavelength［J］. Acta Optica Sinica, 2010, 30(10): 2947～2951

[7] [7] Liu Ke, Li Yanqiu. High precision alignment of phase-shifting point diffraction interfereometer［J］. Chinese J. Lasers, 2010, 37(7): 1845～1849

[8] [8] G. Zhang, R. Ouyang, B. Lu et al.. A displacement method for machine geometry calibration［J］. Ann. CIRP, 1988, 37(1): 515～518

[9] [9] Guiquan Chen, Jingxia Yuan, Jun Ni. A displacement measurement approach for machine geometric error assessment［J］. International Journal of Machine Tools & Manufacture, 2011, 41(1): 149～161

[10] [10] Fan Jinwei, Tian Yue, Song Guorong et al.. Technology of NC machine error parameter identification based on fourteen displacement measurement line［J］. Journal of Beijing Polytechnic University, 2000, 26(2): 11～15

[11] [11] Liu Youwu, Liu Libing, Zhao Xiaosong et al.. Investigation of error compensation technology for NC machine tool［J］. Chinese Journal of Mechanical Engineering, 1998, 9(12): 48～52

[12] [12] Charles Wang. Laser vector measurement technique for the determination and compensation of volumetric positioning errors. Part I: basic theory［J］. Rev. Sci. Instrum., 2000, 71(10): 3933～3937

[13] [13] John Janeczko, Bob Griffin, Charles Wang. Laser vector measurement technique for the determination and compensation of volumetric positioning errors. Part II: experimental verification［J］. Rev. Sci. Instrum., 2000, 71(10): 3938～3941

[14] [14] Zhang Fumin, Qu Xinghua, Dai Jianfang et al.. A method of precision evaluation for field large-scale measureement［J］. Acta Optica Sinica, 2008, 28(11): 2159～2163

[15] [15] Ren Yongjie, Zhu Jigui, Yang Xueyou et al.. Method of robot calibration based on laser tracker［J］. Chinese Journal of Mechanical Engineering, 2007, 43(9): 195～200

[16] [16] Yu Liandong, Cheng Wentao, Fei Yetai. Parameter calibration method for an articulated coordinate measuring machine with laser tracker［J］. Journal of University of Science and Technology of China, 2009, 39(12): 1329～1332

[17] [17] Yan Yonggang, Ouyang Jianfei, Yang Hongguo et al.. Calibration of laser tracker and its application in detection of machine tool［J］. Infrared and Laser Engineering, 2008, 37(S1): 158～161

[18] [18] Zhang Chunfu. Study on the Measuring Technique of Thrust Line of Solid Rocket Motor with Laser Tracker［D］. Harbin: Harbin Institute of Technology, 2007. 13～15