[1] [1] DAS T K, GHOSH P, DAS N C. Preparation, development, outcomes, and application versatility of carbon fiber-based polymer composites: A review[J]. Advanced Composites and Hybrid Materials, 2019, 2(2): 214-233.

[3] [3] KATNAM K B, DA SILVA L F M, YOUNG T M. Bonded repair of composite aircraft structures: A review of scientific challenges and opportunities[J]. Progress in Aerospace Sciences, 2013, 61: 26-42.

[4] [4] KANERVA M, SAARELA O. The peel ply surface treatment for adhesive bonding of composites: A review[J]. International Journal of Adhesion and Adhesives, 2013, 43: 60-69.

[5] [5] SORRENTINO L, POLINI W, BELLINI C, et al. Surface treatment of CFRP: Influence on single lap joint performances[J]. International Journal of Adhesion and Adhesives, 2018, 85: 225-233.

[6] [6] TOYODA M, KATOH H, INAGAKI M. Intercalation of nitric acid into carbon fibers[J]. Carbon, 2001, 39(14): 2231-2234.

[8] [8] GENNA S, LEONE C, UCCIARDELLO N, et al. Increasing adhesive bonding of carbon fiber reinforced thermoplastic matrix by laser surface treatment[J]. Polymer Engineering & Science, 2017, 57(7): 685-692.

[9] [9] XU L Y, LU J R, LI K M, et al. Experimental study of CFRP laser surface modification and bonding characteristics of CFRP/Al6061 heterogeneous joints[J]. Composite Structures, 2022, 283: 115030.

[10] [10] WOLYNSKI A, HERRMANN T, MUCHA P, et al. Laser ablation of CFRP using picosecond laser pulses at different wavelengths from UV to IR[J]. Physics Procedia, 2011, 12: 292-301.

[11] [11] ROMOLI L, FISCHER F, KLING R. A study on UV laser drilling of PEEK reinforced with carbon fibers[J]. Optics and Lasers in Engineering, 2012, 50(3): 449-457.

[12] [12] XIE Y X, YANG B B, LU L S, et al. Shear strength of bonded joints of carbon fiber reinforced plastic (CFRP) laminates enhanced by a two-step laser surface treatment[J]. Composite Structures, 2020, 232: 111559.

[13] [13] LI Y Y, MENG S, GONG Q M, et al. Experimental and theoretical investigation of laser pretreatment on strengthening the heterojunction between carbon fiber-reinforced plastic and aluminum alloy[J]. ACS Applied Materials & Interfaces, 2019, 11(24): 22005-22014.

[14] [14] JIN F L, LI X, PARK S J. Synthesis and application of epoxy resins: A review[J]. Journal of Industrial and Engineering Chemistry, 2015, 29: 1-11.

[15] [15] LAI M H, LIM K S, GUNAWARDENA D S, et al. CO2 laser applications in optical fiber components fabrication and treatment: A review[J]. IEEE Sensors Journal, 2017, 17(10): 2961-2974.

[16] [16] PRAKASH S, KUMAR S. Fabrication of rectangular cross-sectional microchannels on PMMA with a CO2 laser and underwater fabricated copper mask[J]. Optics & Laser Technology, 2017, 94: 180-192.

[17] [17] KHAN A A, AL KHERAIF A A, ALHIJJI S M, et al. Effect of grit-blasting air pressure on adhesion strength of resin to titanium[J]. International Journal of Adhesion and Adhesives, 2016, 65: 41-46.

[18] [18] FISCHER F, KRELING S, DILGER K. Surface structuring of CFRP by using modern excimer laser sources[J]. Physics Procedia, 2012, 39: 154-160.

[19] [19] FANG S Q, LLANES L, BHRE D. Wear characterization of cemented carbides (WC-CoNi) processed by laser surface texturing under abrasive machining conditions[J]. Lubricants, 2017, 5(3): 20.

[20] [20] ARAI S, KAWAHITO Y, KATAYAMA S. Effect of surface modification on laser direct joining of cyclic olefin polymer and stainless steel[J]. Materials & Design, 2014, 59: 448-453.

[21] [21] AYDIN I, DEMIRKIR C. Activation of spruce wood surfaces by plasma treatment after long terms of natural surface inactivation[J]. Plasma Chemistry and Plasma Processing, 2010, 30(5): 697-706.

[22] [22] SUN C C, MIN J Y, LIN J P, et al. The effect of laser ablation treatment on the chemistry, morphology and bonding strength of CFRP joints[J]. International Journal of Adhesion and Adhesives, 2018, 84: 325-334.

[23] [23] NAKAYAMA Y, SOEDA F, ISHITANI A. XPS study of the carbon fiber matrix interface[J]. Carbon, 1990, 28(1): 21-26.

[24] [24] ZHANG Z, SHAN J G, TAN X H. Evaluation of the CFRP grafting and its influence on the laser joining CFRP to aluminum alloy[J]. Journal of Adhesion Science and Technology, 2018, 32(4): 390-406.

[25] [25] SHI C, CHEN X, ZHANG Z Y, et al. Mussel inspired bio-adhesive with multi-interactions for tissue repair[J]. Journal of Biomaterials Science Polymer Edition, 2020, 31(4): 491-503.