[1] [1] Ahmed E, Reisgen U, Schleser M, et al.. On formability of tailor laser welded blanks of DP/TRIP steel sheets[J]. Science and Technology of Welding and Joining, 2010, 15(5): 337-342.

[2] [2] Bettaieb M B, Lemoine X, Bouaziz O, et al.. Numerical modeling of damage evolution of DP steels on the basis of X-ray tomography measurements[J]. Mechanics of Materials, 2011, 43(3): 139-156.

[3] [3] Xiao Rongshi, Wu Shikai. Progress on laser-arc hybrid welding[J]. Chinese J Lasers, 2008, 35(11): 1680-1685.

[4] [4] Huh H, Kim S B, Song J H, et al.. Dynamic tensile characteristics of TRIP-type and DP-type steel sheets for an auto-body[J]. International Journal of Mechanical Sciences, 2008, 50(5): 918-931.

[5] [5] Yu Gang, Zhao Shusen, Zhang Yongjie, et al.. Research on key issues of laser welding of dissimilar metal[J]. Chinese J Lasers, 2009, 36(2): 261-268.

[6] [6] Reisgen U, Schleser M, Mokrov O, et al.. Statistical modeling of laser welding of DP/TRIP steel sheets[J]. Optics & Laser Technology, 2012, 44(1): 92-101.

[7] [7] Reisgen U, Schleser M, Mokrov O, et al.. Uni-and bi-axial deformation behavior of laser welded advanced high strength steel sheets[J]. Journal of Materials Processing Technology, 2010, 210(15): 2188-2196.

[8] [8] Kim J, Chung K H, Lee W, et al.. Numerical evaluation of hydro-formed DP-steel tubes on crash-performance with welding heat effects[J]. Materials Transactions, 2012, 53(5): 812-819.

[9] [9] Mukherjee M, Chintha A R, Raj A, et al.. Effect of short duration tempering on the microstructure and mechanical properties of a continuously annealed dual phase steel[J]. Materials Science and Technology, 2012, 28(8): 971-979.

[10] [10] Miles M P, Ridges C S, Hovanski Y, et al.. Impact of tool wear on joint strength in friction stir spot welding of DP 980 steel[J]. Science and Technology of Welding and Joining, 2011, 16(7): 642-647.

[11] [11] Imlau J, Bleck W, Zaefferer S, et al.. Comparison of damage development depending on the local microstructure in low alloyed Al-TRIP-steels, IF steel and a DP steel[J]. International Journal of Materials Research, 2009, 100(4): 584-593.

[12] [12] Piccini J, Svoboda H. Effect of the plasma arc welding procedure on mechanical properties of DP700 steel[J]. Procedia Materials Science, 2012, 1: 50-57.

[13] [13] Al-Abbaso F M, Nemes J A. Characterizing DP-steels using micromechanical modeling of cells[J]. Computational Materials Science, 2007, 39(2): 402-415.

[14] [14] Qu J, Dabboussi W, Nemes J, et al.. Effect of microstructure and chemical composition on dynamic factor of high strength steels[J]. Materials Science and Technology, 2008, 24(8): 957-963.

[15] [15] Tsipouridis P, Koll L, Krempaszky C, et al.. On the strength of grain and phase boundaries in ferritic-martensitic dual-phase steels[J]. International Journal of Materials Research, 2011, 102(6): 674-686.