[1] Zhang He, Dai Keren, Yin Qiang. Ammunition reliability against the harsh environments during the launch of an electromagnetic gun: a review[J]. IEEE Access, 7, 45322-45339(2019).

[2] [2] Yang Maosong, Sun Yongwei, Zhou Lidong. Summary of electrostatic sensitivity of EED antielectrostatic measures[C]Proceedings of the 7th IEEE International Symposium on Microwave, Antenna, Propagation, EMC Technologies. 2017: 184186.

[3] Zhang Xu, Ma Zhigang, Qiu Lijun, . Effect of ship-borne phased array radar on safety of initiating explosive device[J]. Ship Electronic Engineering, 38, 123-127(2018).

[4] [4] Wang Biao, Sun Yongwei, Wang Xuetian. Test method f bridge wire temperature during ignition of electric explosive device[C]Proceedings of SPIE, International Conference on Intelligent Equipment Special Robots. 2021: 121270R.

[5] Parate B A, Salkar Y B, Chandel S, et al. A novel method for dynamic pressure and velocity measurement related to a power cartridge using a velocity test rig for water-jet disruptor applications[J]. Central European Journal of Energetic Materials, 16, 319-342(2019).

[6] Cooper E F. Electro-explosive devices[J]. IEEE Potentials, 19, 19-22(2000).

[7] [7] Kichouliya R, Devender T, Ramasarma V V, et al. Investigating the effects of impulse excitations on instrumented electroexplosive devices[C]Proceedings of 2012 AsiaPacific Symposium on Electromagic Compatibility. 2012: 988992.

[8] Xu Qiu, Yang Zhuoqing, Zhang Qihuan, et al. Simulation and characterization of a thin film Au/Ni micro hot bridge-wire ignition element under capacitor discharging[J]. International Journal of Thermal Sciences, 102, 100-110(2016).

[9] [9] Dang Pengyang, Liu Jiang, Ni Debin, et al. Analysis of electro explosive perfmance of AlMoO3 bridge wire initiating explosive devices with different modulation ratio[C]Proceedings of 2021 IEEE International Conference on Advances in Electrical Engineering Computer Applications. 2021: 369372.

[10] Lv Zhixing, Yan Nan, Bao Bingliang. Pin-pin ESD protection for electro-explosive device under severe human body ESD[J]. Microelectronics Reliability, 75, 37-42(2017).

[11] [11] MILSTD1512, Electroexplosive subsystems, electrically initiated, design requirements test methods[S].

[12] [12] MILSTD464C, Electromagic environmental effects requirements f systems[S].

[13] [13] GJB 75042012 Test method f hazards of electromagic radiation to dnance[S]

[14] [14] GJB 1389A2005 Electromagic compatibility requirements f systems[S]

[15] [15] GJB 88482016 Electromagic environmental effects test methods f systems[S]

[16] Lu Xinfu, Wei Guanghui, Pan Xiaodong, et al. Dual-port pulsed differential-mode current injection method for high-level electromagnetic pulse radiated susceptibility testing[J]. IET Science, Measurement & Technology, 10, 505-512(2016).

[17] Pan Xiaodong, Wei Guanghui Lu Xinfu, . Test method of using differential mode directional injection as a substitute for high intensity electromagnetic pulse radiation[J]. Chinese Journal of Radio Science, 32, 151-160(2017).

[18] Lu Xinfu, Wei Guanghui, Pan Xiaodong, . High intensity electromagnetic field radiation effect equivalent test method for spectrum-dependent equipment[J]. Systems Engineering and Electronics, 44, 755-761(2022).

[19] Rosenthal L A. Thermal response of bridgewires used in electroexplosive devices[J]. Review of Scientific Instruments, 32, 1033-1036(1961).

[20] [20] Koc S, Tinaztepe H T. A study f the effect of low level conducted periodic pulsed currents electromagic environment on electro explosive device systems[C]Proceedings of the 42nd AIAAASMESAEASEE Joint Propulsion Conference & Exhibit. 2006.

[21] Wang Peng, Du Zhiming. Thermal ignition theory of electric hot wire initiating devices[J]. Initiators & Pyrotechnics, 26-30(2007).

[22] [22] Ye Juan, Li Guilan, Zhao Longfei. Quantitative evaluation f radiofrequency effects of electroexplosive device[C]Proceedings of 2015 IEEE International Symposium on Electromagic Compatibility. 2015: 417421.

[23] [23] Li Jinpeng, Zhou Zhongyuan, Hu Peng, et al. Calculating method f RF induced current of electricexplosive device based on Agrawal model nonunifm transmission line[C]Proceedings of the 2019 14th IEEE International Conference on Electronic Measurement & Instruments. 2019: 736741.

[24] Pantoja J J, Peña N, Mora N, et al. On the electromagnetic susceptibility of hot wire-based electroexplosive devices to RF sources[J]. IEEE Transactions on Electromagnetic Compatibility, 55, 754-763(2013).

[25] Babu A S, Mishra K K, Shetty C P, et al. Method to determine the electrical energy for ignition of electro-explosive devices[J]. Journal of Aerospace Technology and Management, 7, 285-288(2015).

[26] Wang Jun, Zhou Bin, Ye Shuqin, et al. Novel electro-explosive device incorporating a planar transient suppression diode[J]. IEEE Electron Device Letters, 41, 1416-1419(2020).

[27] Wang Kexuan, Bai Yingwei, Ren Wei, . Response rule of hot-wire EED in continuous electromagnetic environment[J]. Chinese Journal of Energetic Materials, 20, 610-613(2012).

[28] Liu Jiankai, Zhang Yuru, Zhao Kai, et al. Simulations of standing wave effect, stop band effect, and skin effect in large-area very high frequency symmetric capacitive discharges[J]. Plasma Science and Technology, 23, 035401(2021).

[29] [29] Li Guilan, Feng Zhang, Ma Weiyu. Study on radiofrequency damage effects of electroexplosive device[C]Proceedings of 2014 International Symposium on Electromagic Compatibility. 2014: 980984.

[30] Wang Ruizhi, Tang Enling, Yang Guolai, et al. Experimental simulation of self-powered overload igniter based on Lead Zirconate Titanate[J]. Sensors and Actuators A: Physical, 314, 112222(2020).

[31] Lin Qiang, Du Songjian, Sun Dong, . Research and application of infrared thermal imaging technology in China[J]. Energy Conservation in Petroleum & Petrochemical Industry, 11, 17-20(2021).

[32] Zhao Yong, Chen Maoqing, Lv Riqing, et al. Small and practical optical fiber fluorescence temperature sensor[J]. IEEE Transactions on Instrumentation and Measurement, 65, 2406-2411(2016).

[33] [33] Kang Kai. Research on the key technology of optical fiber fluescent thermometer[D]. Beijing: The First Academy of China Aerospace Science Technology Cpation, 2018: 5859

[34] Domínguez-Flores C E, Monzón-Hernández D, Moreno-Basulto J I, et al. Real-time temperature sensor based on in-fiber Fabry–Perot interferometer embedded in a resin[J]. Journal of Lightwave Technology, 37, 1084-1090(2019).

[35] Wang Botao, Niu Yanxiong, Zheng Shaowei, et al. A high temperature sensor based on sapphire fiber Fabry-Perot interferometer[J]. IEEE Photonics Technology Letters, 32, 89-92(2020).

[36] Zou Hui, Ma Lei, Xiong Hui, et al. Fiber ring laser sensor based on Fabry–Perot cavity interferometer for temperature sensing[J]. Laser Physics, 28, 015102(2017).

[37] [37] Duplain G, Leduc C. Smart reliable assessment of electromagic environmental effects on dnance made easy[R]. Quebec: OpSens Inc. , 2014.

[38] [38] Ma Sen. Study on highspeed GaAs optical fiber temperature sensing technology its application[D]. Xinyang: Xinyang Nmal University, 2021: 2324

[39] [39] Lee K R, Bent J E, Pinkston W H. Improved measurement techniques of bridgewire heating caused by induced electromagic radiation[C]Proceedings of 1987 IEEE International Symposium on Electromagic Compatibility. 1987: 14.

[40] Wang Shaoguang, Wei Guanghui, Chen Yazhou. Optic-fiber test method for electromagnetic hazards of EED[J]. High Voltage Engineering, 32, 6-10(2007).

[41] [41] Kichouliya R, Devender, Ramasarma V V, et al. Hazards of electromagic radiation to dnance (HERO) assessment of electroexplosive devices validation of extrapolation method f estimation of the safety margin at HERO electromagic environments[C]Proceedings of 2011 IEEE International Symposium on Electromagic Compatibility. 2011: 946953.

[42] Zhao Tuan, Feng Qingmei, Yao Hongzhi, . Study on the quantitative test technique of EED induced current[J]. Initiators & Pyrotechnics, 50-52(2013).

[43] [43] Xin Liwei, Wang Tao, Tian Jinshou, et al. Induced current measurement in bridgewire EED through infrared optical fiber image bundle[C]Proceedings of SPIE 8905, International Symposium on Photoelectronic Detection Imaging 2013: Laser Sensing Imaging Applications. 2013: 890518.

[44] [44] Lu Xinfu, Wei Guanghui, Sun Yongwei, et al. Temperature rise test method of hot bridgewire EED under steady conditions[C]Proceedings of 2019 IEEE 6th International Symposium on Electromagic Compatibility. 2019: 14.

[45] Zhao Tuan, Zhang Rui, Yao Hongzhi, . Estimation on the safety of rocket projectile in RF electromagnetic environment[J]. Acta Armamentarii, 41, 299-304(2020).

[46] Wang Biao, Sun Yongwei, Wang Xuetian, et al. Equivalent test method for strong electromagnetic field radiation effect of EED[J]. International Journal of Antennas and Propagation, 2021, 7331428(2021).

[47] Wang Biao, Sun Yongwei, Wei Guanghui, et al. Research on test method of ignition temperature of electric explosive device under electromagnetic pulse[J]. Radioengineering, 30, 510-516(2021).

[48] Qi Chao, Wei Guanghui, Pan Xiaodong, . Effect of variation of electromagnetic pulse repetition rate on digital communication stations[J]. High Power Laser and Particle Beams, 30, 103207(2018).