[1] Deo Y, Guha S, Sarkar K et al. Electrodeposited Ni-Cu alloy coatings on mild steel for enhanced corrosion properties[J]. Applied Surface Science, 515, 146078(2020).

[2] Sundaram M, Kamaraj A B, Lillie G. Experimental study of localized electrochemical deposition of Ni-Cu alloy using a moving anode[J]. Procedia CIRP, 68, 227-231(2018).

[3] Kang N, Ma W Y, Li F H et al. Microstructure and wear properties of selective laser melted WC reinforced 18Ni-300 steel matrix composite[J]. Vacuum, 154, 69-74(2018).

[4] Hu D W, Liu Y, Chen H et al. Microstructure and properties of laser cladding Ni-based WC coating on Q960E steel[J]. Chinese Journal of Lasers, 48, 0602120(2021).

[5] Li H B, Guo M, Wang L et al. Laser cladding preparation and wear resistance of H13/Ni/WC hybrid powder gradient cladding layer[J]. Laser & Optoelectronics Progress, 58, 0314006(2021).

[6] Liu Z H, Liu Y F, Zhang L L et al. Microstructure and high-temperature friction and wear properties of TiC/CaF2/Inconel 718 composite fabricated using laser melting deposition technique[J]. Chinese Journal of Lasers, 47, 0102008(2020).

[7] Wang Q T, Zeng X B, Chen C R et al. Morphology, microstructure, and mechanical properties of Fe50-TiC composite laser cladding layer on Cr12 mold steel[J]. Laser & Optoelectronics Progress, 58, 0714002(2021).

[8] Hwang T, Woo Y Y, Han S W et al. Functionally graded properties in directed-energy-deposition titanium parts[J]. Optics & Laser Technology, 105, 80-88(2018).

[9] Chen Y, Guo Y B, Xu M J et al. Study on the element segregation and Laves phase formation in the laser metal deposited IN718 superalloy by flat top laser and Gaussian distribution laser[J]. Materials Science and Engineering: A, 754, 339-347(2019).

[10] Wang R, Wang J, Cao T W et al. Microstructure characteristics of a René N5 Ni-based single-crystal superalloy prepared by laser-directed energy deposition[J]. Additive Manufacturing, 61, 103363(2023).

[11] Svetlizky D, Das M, Zheng B L et al. Directed energy deposition (DED) additive manufacturing: physical characteristics, defects, challenges and applications[J]. Materials Today, 49, 271-295(2021).

[12] Gullipalli C, Thawari N, Burad P et al. Residual stresses and distortions in additive manufactured Inconel 718[J]. Materials and Manufacturing Processes, 1-12(2023).

[13] Fan P, Pan J T, Ge Y M et al. Finite element analysis of residual stress in TC4/TC11 titanium alloy gradient material produced by laser additive manufacturing[J]. Chinese Journal of Lasers, 48, 1802012(2021).

[14] Wang J D, Li L Q, Tao W. Crack initiation and propagation behavior of WC particles reinforced Fe-based metal matrix composite produced by laser melting deposition[J]. Optics & Laser Technology, 82, 170-182(2016).

[15] Li L, Zhang X C, Cui W Y et al. Temperature and residual stress distribution of FGM parts by DED process: modeling and experimental validation[J]. The International Journal of Advanced Manufacturing Technology, 109, 451-462(2020).

[16] Zhang P X, Pang Y B, Yu M W. Effects of WC particle types on the microstructures and properties of WC-reinforced Ni60 composite coatings produced by laser cladding[J]. Metals, 9, 583(2019).

[17] Li J Z, Liu Y B, Sun Q J et al. Effects of laser beam wobble on weld formation characteristics, microstructure, and strength of aluminum alloy/steel joints[J]. Chinese Journal of Lasers, 47, 0402010(2020).

[18] Fang Y Z, Dai G Q, Guo Y H et al. Effect of laser swing on microstructure and mechanical properties of titanium alloy deposited by laser melting[J]. Acta Metallurgica Sinica, 59, 136-146(2023).

[19] Xu K X, Lei Z, Huang R S et al. Effects of oscillation parameters on weld formation and porosity of titanium alloy narrow-gap laser wire filling welding[J]. Chinese Journal of Lasers, 48, 0602111(2021).

[20] Li S R, Mi G Y, Wang C M. A study on laser beam oscillating welding characteristics for the 5083 aluminum alloy: morphology, microstructure and mechanical properties[J]. Journal of Manufacturing Processes, 53, 12-20(2020).

[21] Ai Y W, Yu L, Huang Y et al. The investigation of molten pool dynamic behaviors during the “∞” shaped oscillating laser welding of aluminum alloy[J]. International Journal of Thermal Sciences, 173, 107350(2022).

[22] Wang Z M, Oliveira J P, Zeng Z et al. Laser beam oscillating welding of 5A06 aluminum alloys: Microstructure, porosity and mechanical properties[J]. Optics & Laser Technology, 111, 58-65(2019).

[23] Wang L, Gao M, Zhang C et al. Effect of beam oscillating pattern on weld characterization of laser welding of AA6061-T6 aluminum alloy[J]. Materials & Design, 108, 707-717(2016).

[24] Hagenlocher C, Sommer M, Fetzer F et al. Optimization of the solidification conditions by means of beam oscillation during laser beam welding of aluminum[J]. Materials & Design, 160, 1178-1185(2018).

[25] Zhang C, Li X W, Gao M. Effects of circular oscillating beam on heat transfer and melt flow of laser melting pool[J]. Journal of Materials Research and Technology, 9, 9271-9282(2020).

[26] Chen C, Zhou H P, Wang C J et al. Laser welding of ultra-high strength steel with different oscillating modes[J]. Journal of Manufacturing Processes, 68, 761-769(2021).

[27] Marenych O, Kostryzhev A. Strengthening mechanisms in nickel-copper alloys: a review[J]. Metals, 10, 1358(2020).

[28] Ren M F, Li R F, Zhang X Q et al. Effect of WC particles preparation method on microstructure and properties of laser cladded Ni60-WC coatings[J]. Journal of Materials Research and Technology, 22, 605-616(2023).

[29] Lu Y, Deng Y C, Shi L et al. Numerical simulation of thermal flow dynamics in oscillating laser welding of aluminum alloy[J]. Optics & Laser Technology, 159, 109003(2023).

[30] Li H D, Xia Y L, Xie M et al. Graphene nanoplatelets reinforced NiCu composite manufactured by laser melting deposition[J]. Journal of Alloys and Compounds, 929, 167261(2022).

[31] Correa E O, Alcântara N G, Valeriano L C et al. The effect of microstructure on abrasive wear of a Fe-Cr-C-Nb hardfacing alloy deposited by the open arc welding process[J]. Surface and Coatings Technology, 276, 479-484(2015).

[32] Jin J B, Zhao Y, Zhao S Z et al. Effect of TiN content on microstructure and wear resistance of Ti-based composites produced by selective laser melting[J]. Chinese Journal of Lasers, 46, 1102013(2019).

[33] Dong Y, Shu L S, Lin R. Microstructure and friction and wear properties of laser cladded Fe-Cr-Mo-Si alloy coating[J]. Laser & Optoelectronics Progress, 58, 1914007(2021).

[34] Qian J, Hu D W, Chen Y et al. Microstructure and properties of laser cladding Ti/Stellite6 composite coating on Ti-6Al-4V surface[J]. Chinese Journal of Lasers, 49, 1103003(2022).

[35] Xie M, Zhou S F, Jin J B et al. Microstructure and properties of homogeneous Cu90Fe10 immiscible composites with nanotwins by laser powder deposition: effect of spot size[J]. Journal of Alloys and Compounds, 821, 153231(2020).