[1] [1] Li Wei, Guo Quanfeng. Application of carbon fiber composites to cosmonautic fields[J]. Chinese Optics, 2011, 4(3): 201-212.

[2] [2] Fang Haijun, Tu Bin. Stability analysis of CFRP reflecting surface in satellite antenna[J]. Spacecraft Recovery & Remote Sensing, 2007, 28(1): 67-71.

[3] [3] Li Kaiyuan, Xu Yongdong, Zhang Litong, et al.. Effects of fabric architectures on the thermal expansion coefficient and the thermal diffusivity of carbon fiber reinforced silicon carbide composites[J]. Journal of the Chinese Ceramic Society, 2008, 36(11): 1564-1569.

[4] [4] Zeng Zhi, Tao Ning, Feng Lichun, et al.. Adopting the ratio of defect size over depth to quantitatively study the effect of defect size on the measurement of defect depth[J]. Chinese J Lasers, 2011, 38(s1): s108005.

[5] [5] Sun Yanchun, Ma Qishuang, Yao Hongyu. Application of energy accumulation in IR thermal image sequences processing[J]. Opto-Electronic Engineering, 2008, 35(3): 39-43.

[6] [6] Wu Xiaoyan, Yu Yingjie, Lü Lijun. Review on non-destructive detection of inner defects of object[J]. Laser & Optoelectronics Progress, 2013, 50（4）: 040002.

[7] [7] Theodorakeas P, Avdelidis N P, Hrissagis K, et al.. Automated transient thermography for the inspection of CFRP structures: Experimental results and developed procedures[C]. SPIE, 2011, 8013: 80130W.

[8] [8] Chen D P, Zeng Z, Zhang C L, et al.. Air-coupled ultrasonic infrared thermography for inspecting impact damages in CFRP composite[J]. Chinese Optics Letters, 2012, 10(s1): s10401.

[9] [9] Zeng Z, Zhou J, Tao N, et al.. Absolute peak slope time based thickness measurement using pulsed thermography[J]. Infrared Physics & Technology, 2012, 55(2-3): 200-204.

[10] [10] Wu Enqi, Xu Zihong, Guo Xinxin, et al.. Influence of porosity on photothermal radiometry of carbon fiber reinforced polymers[J]. Chinese J Lasers, 2015, 42(7): 0706006.

[11] [11] Zhao Yanguang, Guo Xinglin, Ren Mingfa. Lock-in infrared thermography for the non-destructive testing of fatigue specimen with defects[J]. Acta Optica Sinica, 2010, 30(10): 2776-2781.

[12] [12] Kalogiannakis G, van Hemelrijck D, Longuemart S, et al.. Thermal characterization of anisotropic media in photothermal point, line, and grating configuration[J]. Journal of Applied Physics, 2006, 100(6): 2487-2490.

[13] [13] Mayr G, Plank B, Sekelja J, et al.. Active thermography as a quantitative method for non-destructive evaluation of porous carbon fiber reinforced polymers[J]. NDT & E International, 2011, 44(7): 537-543.

[14] [14] Mendioroz A, Fuente-Dacel R, Apinaniz E, et al.. Thermal diffusivity measurements of thin plates and filaments using lock-in thermography[J]. Review of Scientific Instruments, 2009, 80(7): 074904.

[15] [15] Kuribara M, Nagano H. Anisotropic thermal diffusivity measurements in high-thermal-conductive carbon-fiber-reinforced plastic composites[J]. Journal of Electronics Cooling and Thermal Control, 2015, 5(1): 15-25.