[1] VANDIVER P B, SOFFER O, KLIMA B et al. The origins of ceramic technology at Dolni Věstonice, Czechoslovakia. Science, 1002(1989). https://www.science.org/doi/10.1126/science.246.4933.1002

[2] GERMAN R M. History of sintering: empirical phase. Powder Metallurgy, 117(2013). http://www.tandfonline.com/doi/full/10.1179/1743290112Y.0000000025

[3] BORDIA R K, KANG S J L, OLEVSKY E A. Current understanding and future research directions at the onset of the next century of sintering science and technology. Journal of the American Ceramic Society, 2314(2017). https://onlinelibrary.wiley.com/doi/10.1111/jace.14919

[4] NDAYISHIMIYE A, SENGUL M Y, BANG S H et al. Comparing hydrothermal sintering and cold sintering process: mechanisms, microstructure, kinetics and chemistry. Journal of the European Ceramic Society, 1312(2020). https://linkinghub.elsevier.com/retrieve/pii/S0955221919307940

[5] SMITH B L, SCHÄFFER T E, VIANI M et al. Molecular mechanistic origin of the toughness of natural adhesives, fibres and composites. Nature, 761(1999). https://www.nature.com/articles/21607

[6] RENARD F, BERNARD D, THIBAULT X et al. Synchrotron 3D microtomography of halite aggregates during experimental pressure solution creep and evolution of the permeability. Geophysical Research Letters, L07607(2004).

[7] FU C L, LI X M, GUO J. Recent progress of dielectric materials prepared via cold sintering process. Journal of Shaanxi Normal University (Natural Science Edition), 30(2021).

[8] JIANG R Z, LIU J. Research progress of cold sintering technology of ceramics. Journal of Guiyang University (Natural Science Edition), 60(2021).

[9] DURAN C, SATO K, HOTTA Y et al. Eco-friendly processing and methods for ceramic materials: a review. Journal of the Ceramic Society of Japan, 1175(2008). https://www.jstage.jst.go.jp/article/jcersj2/116/1359/116_1359_1175/_article

[10] IBN-MOHAMMED T, RANDALL C A, MUSTAPHA K B et al. Decarbonising ceramic manufacturing: a techno-economic analysis of energy efficient sintering technologies in the functional materials sector. Journal of the European Ceramic Society, 5213(2019). https://linkinghub.elsevier.com/retrieve/pii/S0955221919305527

[11] TODD R I, ZAPATA-SOLVAS E, BONILLA R S et al. Electrical characteristics of flash sintering: thermal runaway of Joule heating. Journal of the European Ceramic Society, 1865(2015). https://linkinghub.elsevier.com/retrieve/pii/S0955221914006797

[12] ZHANG Y, JUNG J I, LUO J. Thermal runaway, flash sintering and asymmetrical microstructural development of ZnO and ZnO- Bi2O3 under direct currents. Acta Materialia, 87(2015). https://linkinghub.elsevier.com/retrieve/pii/S1359645415002608

[13] BIESUZ M, GRASSO S, SGLAVO V M. What’s new in ceramics sintering? A short report on the latest trends and future prospects. Current Opinion in Solid State & Materials Science, 100868(2020).

[14] GUO J, FLOYD R, LOWUM S et al. Cold sintering: progress, challenges, and future opportunities. Annual Review of Materials Research, 275(2019).

[15] COLOGNA M, RASHKOVA B, RAJ R. Flash sintering of nanograin zirconia in <5 s at 850 ℃. Journal of the American Ceramic Society, 35569(2010).

[16] BIESUZ M, SGLAVO V M. Flash sintering of ceramics. Journal of the European Ceramic Society, 115(2019).

[17] GUO H Z, BAKER A, GUO J et al. Protocol for ultralow- temperature ceramic sintering: an integration of nanotechnology and the cold sintering process. ACS Nano, 10606(2016). https://pubs.acs.org/doi/10.1021/acsnano.6b03800

[18] GUO H Z, BAKER A, GUO J et al. Cold sintering process: a novel technique for low-temperature ceramic processing of ferroelectrics. Journal of the American Ceramic Society, 3489(2016). https://onlinelibrary.wiley.com/doi/10.1111/jace.14554

[19] GUO J, BERBANO S S, GUO H Z et al. Cold sintering process of composites: bridging the processing temperature gap of ceramic and polymer materials. Advanced Functional Materials, 7115(2016). https://onlinelibrary.wiley.com/doi/10.1002/adfm.201602489

[20] GUO J, GUO H Z, BAKER A L et al. Cold sintering: a paradigm shift for processing and integration of ceramics. Angewandte Chemie International Edition, 11457(2016). https://onlinelibrary.wiley.com/doi/10.1002/anie.201605443

[21] GUO J, BAKER A L, GUO H Z et al. Cold sintering process: a new era for ceramic packaging and microwave device development. Journal of the American Ceramic Society, 669(2017). https://onlinelibrary.wiley.com/doi/10.1111/jace.14603

[22] MUNIR Z A, ANSELMI-TAMBURINI U, OHYANAGI M. The effect of electric field and pressure on the synthesis and consolidation of materials: a review of the spark plasma sintering method. Journal of Materials Science, 763(2006). http://link.springer.com/10.1007/s10853-006-6555-2

[23] GUILLON O, GONZALEZ-JULIAN J, DARGATZ B et al. Field- assisted sintering technology/spark plasma sintering: mechanisms, materials, and technology developments. Advanced Engineering Materials, 830(2014). https://onlinelibrary.wiley.com/doi/10.1002/adem.201300409

[24] YANAGISAWA K, KANAHARA S, NISHIOKA M et al. Immobilization of radioactive wastes in hydrothermal synthetic rock, (II). Journal of Nuclear Science and Technology, 558(1984). http://www.tandfonline.com/doi/abs/10.1080/18811248.1984.9731081

[25] YAMASAKI N, YANAGISAWA K, NISHIOKA M et al. A hydrothermal hot-pressing method: apparatus and application. Journal of Materials Science Letters, 355(1986). http://link.springer.com/10.1007/BF01748104

[26] YAMASAKI N, KAI T, NISHIOKA M et al. Porous hydroxyapatite ceramics prepared by hydrothermal hot-pressing. Journal of Materials Science Letters, 1150(1990). http://link.springer.com/10.1007/BF00721872

[27] IOKU K, YAMAMOTO K, YANAGISAWA K et al. Low temperature sintering of hydroxyapatite by hydrothermal hot-pressing. Phosphorus Research Bulletin, 65(1994). https://www.jstage.jst.go.jp/article/prb1992/4/0/4_65/_article

[28] HOSOI K, HASHIDA T, TAKAHASHI H et al. New processing technique for hydroxyapatite ceramics by the hydrothermal hot-pressing method. Journal of the American Ceramic Society, 2771(1996). https://onlinelibrary.wiley.com/doi/10.1111/j.1151-2916.1996.tb09048.x

[29] VAKIFAHMETOGLU C, KARACASULU L. Cold sintering of ceramics and glasses: a review. Current Opinion in Solid State & Materials Science, 100807(2020).

[30] BOUVILLE F, STUDART A R. Geologically-inspired strong bulk ceramics made with water at room temperature. Nature Communications, 14655(2017).

[31] INDUJA I J, SEBASTIAN M T. Microwave dielectric properties of mineral sillimanite obtained by conventional and cold sintering process. Journal of the European Ceramic Society, 2143(2017). https://linkinghub.elsevier.com/retrieve/pii/S0955221917300079

[32] INDUJA I J, SEBASTIAN M T. Microwave dielectric properties of cold sintered Al2O3-NaCl composite. Materials Letters, 55(2018). https://linkinghub.elsevier.com/retrieve/pii/S0167577X17314283

[33] WANG D, ZHOU D, ZHANG S et al. Cold-sintered temperature stable Na0.5Bi0.5MoO4-Li2MoO4 microwave composite ceramics. ACS Sustainable Chemistry & Engineering, 2438(2018).

[34] GUO J, ZHAO X T, DE BEAUVOIR T H et al. Recent progress in applications of the cold sintering process for ceramic-polymer composites. Advanced Functional Materials, 1801724(2018). https://onlinelibrary.wiley.com/doi/10.1002/adfm.201801724

[35] GUO H Z, GUO J, BAKER A et al. Hydrothermal-assisted cold sintering process: a new guidance for low-temperature ceramic sintering. ACS Applied Materials & Interfaces, 20909(2016).

[36] HUANG H, TANG J, LIU J. Preparation of Na0.5Bi0.5TiO3 ceramics by hydrothermal-assisted cold sintering. Ceramics International, 6753(2019). https://linkinghub.elsevier.com/retrieve/pii/S0272884218335624

[37] YU T, CHENG J, LI L et al. Current understanding and applications of the cold sintering process. Frontiers of Chemical Science and Engineering, 654(2019).

[38] GALOTTA A, SGLAVO V M. The cold sintering process: a review on processing features, densification mechanisms and perspectives. Journal of the European Ceramic Society, 1(2021).

[39] NDAYISHIMIYE A, SENGUL M Y, SADA T et al. Roadmap for densification in cold sintering: chemical pathways. Open Ceramics, 100019(2020). https://linkinghub.elsevier.com/retrieve/pii/S2666539520300195

[40] HONG W B, LI L, CAO M et al. Plastic deformation and effects of water in room-temperature cold sintering of NaCl microwave dielectric ceramics. Journal of the American Ceramic Society, 4038(2018). https://onlinelibrary.wiley.com/doi/10.1111/jace.15572

[41] HAUG M, BOUVILLE F, RUIZ-AGUDO C et al. Cold densification and sintering of nanovaterite by pressing with water. Journal of the European Ceramic Society, 893(2020). https://linkinghub.elsevier.com/retrieve/pii/S0955221919307058

[42] GONZALEZ-JULIAN J, NEUHAUS K, BERNEMANN M et al. Unveiling the mechanisms of cold sintering of ZnO at 250 ℃ by varying applied stress and characterizing grain boundaries by Kelvin Probe Force Microscopy. Acta Materialia, 116(2018). https://linkinghub.elsevier.com/retrieve/pii/S135964541730914X

[43] KANG X, FLOYD R, LOWUM S et al. Cold sintering with dimethyl sulfoxide solutions for metal oxides. Journal of Materials Science, 7438(2019).

[44] KANG S, GUO H, WANG J et al. Influence of surface coating on the microstructures and dielectric properties of BaTiO3 ceramic via a cold sintering process. RSC Advances, 30870(2020). http://xlink.rsc.org/?DOI=D0RA03849K

[45] FAOURI S S, MOSTAED A, DEAN J S et al. High quality factor cold sintered Li2MoO4-BaFe12O19 composites for microwave applications. Acta Materialia, 202(2019). https://linkinghub.elsevier.com/retrieve/pii/S1359645418310085

[46] ZHOU D, PANG L X, WANG D W et al. Novel water-assisting low firing MoO3 microwave dielectric ceramics. Journal of the European Ceramic Society, 2374(2019). https://linkinghub.elsevier.com/retrieve/pii/S0955221919300780

[47] LIU Y, SUN Q, WANG D et al. Development of the cold sintering process and its application in solid-state lithium batteries. Journal of Power Sources, 193(2018). https://linkinghub.elsevier.com/retrieve/pii/S0378775318304762

[48] GUO J, GUO H, HEIDARY D S B et al. Semiconducting properties of cold sintered V2O5 ceramics and Co-sintered V2O5-PEDOT: PSS composites. Journal of the European Ceramic Society, 1529(2017). https://linkinghub.elsevier.com/retrieve/pii/S0955221916306215

[49] LIU J A, LI C H, SHAN J J et al. Preparation of high-density InGaZnO4 target by the assistance of cold sintering. Materials Science in Semiconductor Processing, 17(2018). https://linkinghub.elsevier.com/retrieve/pii/S1369800117326720

[50] MARIA J P, KANG X Y, FLOYD R D et al. Cold sintering: current status and prospects. Journal of Materials Research, 3205(2017). http://link.springer.com/10.1557/jmr.2017.262

[51] KÄHÄRI H, TEIRIKANGAS M, JUUTI J et al. Dielectric properties of lithium molybdate ceramic fabricated at room temperature. Journal of the American Ceramic Society, 3378(2014). https://onlinelibrary.wiley.com/doi/10.1111/jace.13277

[52] WU M W, ZHU H F, WANG J F et al. Review on cold sintering process for preparation of ceramic materials. China Ceramics, 1(2021).

[53] KANG S L, ZHAO X T, ZHANG J X et al. Recent research progress of cold sintering process and its potential application in electrotechnical fields. Transactions of China Electrotechnical Society, 10984(2022).

[54] FUNAHASHI S, GUO J, GUO H et al. Demonstration of the cold sintering process study for the densification and grain growth of ZnO ceramics. Journal of the American Ceramic Society, 546(2017). https://onlinelibrary.wiley.com/doi/10.1111/jace.14617

[55] KANG X, FLOYD R, LOWUM S et al. Mechanism studies of hydrothermal cold sintering of zinc oxide at near room temperature. Journal of the American Ceramic Society, 4459(2019). https://onlinelibrary.wiley.com/doi/10.1111/jace.16340

[56] TSUJI K, NDAYISHIMIYE A, LOWUM S et al. Single step densification of high permittivity BaTiO3 ceramics at 300 ºC. Journal of the European Ceramic Society, 1280(2020). https://linkinghub.elsevier.com/retrieve/pii/S0955221919308660

[57] SADA T, TSUJI K, NDAYISHIMIYE A et al. High permittivity BaTiO3 and BaTiO3-polymer nanocomposites enabled by cold sintering with a new transient chemistry: Ba(OH)2·8H2O. Journal of the European Ceramic Society, 409(2021). https://linkinghub.elsevier.com/retrieve/pii/S0955221920306270

[58] ZHAO Y Y, BERBANO S S, GAO L S et al. Cold-sintered V2O5-PEDOT:PSS nanocomposites for negative temperature coefficient materials. Journal of the European Ceramic Society, 1257(2019). https://linkinghub.elsevier.com/retrieve/pii/S0955221918306368

[59] GUO J, PFEIFFENBERGER N, BEESE A et al. Cold sintering Na2Mo2O7 ceramic with poly(ether imide) (PEI) polymer to realize high-performance composites and integrated multilayer circuits. ACS Applied Nano Materials, 3837(2018). https://pubs.acs.org/doi/10.1021/acsanm.8b00609

[60] NDAYISHIMIYE A, TSUJI K, WANG K et al. Sintering mechanisms and dielectric properties of cold sintered (1-x)SiO2-xPTFE composites. Journal of the European Ceramic Society, 4743(2019). https://linkinghub.elsevier.com/retrieve/pii/S0955221919305357

[61] SADA T, TSUJI K, NDAYISHIMIYE A et al. Enhanced high permittivity BaTiO3-polymer nanocomposites from the cold sintering process. Journal of Applied Physics, 084103(2020). http://aip.scitation.org/doi/10.1063/5.0021040

[62] ZHAO X T, GUO J, WANG K et al. Introducing a ZnO-PTFE (polymer) nanocomposite varistor via the cold sintering process. Advanced Engineering Materials, 1700902(2018). https://onlinelibrary.wiley.com/doi/10.1002/adem.201700902

[63] SEO J H, GUO J, GUO H Z et al. Cold sintering of a Li-ion cathode: LiFePO4-composite with high volumetric capacity. Ceramics International, 15370(2017). https://linkinghub.elsevier.com/retrieve/pii/S0272884217317753

[64] GYAN D S, DWIVEDI A. Structural and electrical characterization of NaNbO3-PVDF nanocomposites fabricated using cold sintering synthesis route. Journal of Applied Physics, 024103(2019). http://aip.scitation.org/doi/10.1063/1.5046458

[65] SI M M, GUO J, HAO J Y et al. Cold sintered composites consisting of PEEK and metal oxides with improved electrical properties via the hybrid interfaces. Composites Part B-Engineering, 109349(2021). https://linkinghub.elsevier.com/retrieve/pii/S1359836821007216

[66] SI M M, HAO J Y, ZHAO E D et al. Preparation of zinc oxide/poly-ether-ether-ketone (PEEK) composites via the cold sintering process. Acta Materialia, 117036(2021). https://linkinghub.elsevier.com/retrieve/pii/S135964542100416X

[67] NDAYISHIMIYE A, GRADY Z A, TSUJI K et al. Thermosetting polymers in cold sintering: the fabrication of ZnO-polydimethylsiloxane composites. Journal of the American Ceramic Society, 3039(2020). https://onlinelibrary.wiley.com/doi/10.1111/jace.17009

[68] MENA-GARCIA J, DURSUN S, TSUJI K et al. Integration and characterization of a ferroelectric polymer PVDF-TrFE into the grain boundary structure of ZnO via cold sintering. Journal of the European Ceramic Society, 2789(2022). https://linkinghub.elsevier.com/retrieve/pii/S0955221922000899

[69] BANG S H, TSUJI K, NDAYISHIMIYE A et al. Toward a size scale-up cold sintering process at reduced uniaxial pressure. Journal of the American Ceramic Society, 2322(2020). https://onlinelibrary.wiley.com/doi/10.1111/jace.16976

[70] SEO J H, NAKAYA H, TAKEUCHI Y et al. Broad temperature dependence, high conductivity, and structure-property relations of cold sintering of LLZO-based composite electrolytes. Journal of the European Ceramic Society, 6241(2020). https://linkinghub.elsevier.com/retrieve/pii/S0955221920305203

[71] DE BEAUVOIR T H, TSUJI K, ZHAO X et al. Cold sintering of ZnO-PTFE: utilizing polymer phase to promote ceramic anisotropic grain growth. Acta Materialia, 511(2020). https://linkinghub.elsevier.com/retrieve/pii/S1359645420300069

[72] VAKIFAHMETOGLU C, ANGER J F, ATAKAN V et al. Reactive hydrothermal liquid-phase densification (rHLPD) of ceramics: a study of the BaTiO3[TiO2] composite system. Journal of the American Ceramic Society, 3893(2016). https://onlinelibrary.wiley.com/doi/10.1111/jace.14468

[73] LI Q, GUPTA S, TANG L et al. A novel strategy for carbon capture and sequestration by rHLPD processing. Frontiers in Energy Research, 53(2016).