[1] Cao J, Lu H F, Lu J Z et al. Effects of tungsten carbide particles on microstructure and wear resistance of hot-working die prepared via laser cladding[J]. Chinese Journal of Lasers, 46, 0702001(2019).

[2] Cui C, Wu M P, Xia S H et al. Effect of heat treatment on properties of laser cladding cobalt-based coating on 42CrMo steel surface[J]. Chinese Journal of Lasers, 47, 0602011(2020).

[3] Li G S, Li J H, Feng W L et al. Effects of specific powder and specific energy on the characteristics of NiWC25 by laser cladding[J]. Surface Technology, 48, 253-258(2019).

[4] Li J H, Li G S, Zhang D Q et al. Study on microhardness of laser cladding NJ-4 powder[J]. Surface Technology, 47, 77-83(2018).

[5] Chen H, Lu Y Y, Sun Y S et al. Coarse TiC particles reinforced H13 steel matrix composites produced by laser cladding[J]. Surface and Coatings Technology, 395, 125867(2020). http://www.sciencedirect.com/science/article/pii/S0257897220305363

[6] Zhao S J, Qi W J, Huang Y H et al. Numerical simulation study on thermal cycle characteristics of temperature field of TC4 surface laser cladding Ni60 based coating[J]. Surface Technology, 49, 301-308(2020).

[7] Wang X, Yu Y G, Huang E Z et al. Research status of laser cladding temperature field simulation[J]. Thermal Spray Technology, 11, 10-15(2019).

[8] Muvvala G, Mullick S, Nath A K et al. Development of process maps based on molten pool thermal history during laser cladding of Inconel 718/TiC metal matrix composite coatings[J]. Surface and Coatings Technology, 399, 126100(2020). http://www.sciencedirect.com/science/article/pii/S0257897220307696

[9] Kong F R, Kovacevic R. Modeling of heat transfer and fluid flow in the laser multilayered cladding process[J]. Metallurgical and Materials Transactions B, 41, 1310-1320(2010). http://link.springer.com/article/10.1007/s11663-010-9412-2

[10] Liu H, Yu G, He X L et al. Three-dimensional numerical simulation of transient temperature field and coating geometry in powder feeding laser cladding[J]. Chinese Journal of Lasers, 40, 1203007(2013).

[11] Jiang Y C, Cheng Y H, Zhang X C et al. Simulation and experimental investigations on the effect of Marangoni convection on thermal field during laser cladding process[J]. Optik, 203, 164044(2020). http://www.sciencedirect.com/science/article/pii/S0030402619319436

[12] Song B X, Yu T B, Jiang X Y et al. Effect of laser power on molten pool evolution and convection[J]. Numerical Heat Transfer, Part A: Applications, 78, 48-59(2020).

[13] He S Y, Liu X D, Zhao S Z et al. Microstructure and wear resistance of carbon fibers reinforced 316L stainless steel prepared using laser cladding[J]. Chinese Journal of Lasers, 47, 0502010(2020).

[14] Song P F, Jiang F L, Wang Y L et al. Advances in the preparation of high entropy alloy coatings by laser cladding[J]. Surface Technology, 50, 242-252, 286(2021).