[1] Zheng Feng, Wang Wugang, Zhao Xiaofan, et al. Identifying electromagnetic noise-source impedance using hybrid of measurement and calculation method[J]. IEEE Transactions on Power Electronics, 34, 9609-9618(2019).

[2] [2] Long Haiqing. Study on the EMC of PWM drive mot system of electric vehicle[D]. Chongqing: Chongqing University, 2014

[3] Wang Biao, Sun Yongwei, Wei Guanghui, et al. Research on test method of ignition temperature of electric explosive device under electromagnetic pulse[J]. Radioengineering, 30, 510-516(2021).

[4] Wang Biao, Sun Yongwei, Wang Xuetian, et al. Equivalent test method for strong electromagnetic field radiation effect of EED[J]. International Journal of Antennas and Propagation, 2021, 7331428(2021).

[5] Gubia E, Sanchis P, Ursua A, et al. Frequency domain model of conducted EMI in electrical drives[J]. IEEE Power Electronics Letters, 3, 45-49(2005).

[6] Kim T, Feng Dong, Jang M, et al. Common mode noise analysis for cascaded boost converter with silicon carbide devices[J]. IEEE Transactions on Power Electronics, 32, 1917-1926(2017).

[7] [7] Gri G, Casadei D, Reggiani U. Analysis of common differentialmode HF current components in PWM inverterfed AC mots[C]Proceedings of the 29th Annual IEEE Power Electronics Specialists Conference. 1998: 11461151.

[8] [8] Feng Ranran. Research on electromagic interference suppression technology of electric vehicle harness[D]. Chengdu: University of Electronic Science Technology of China, 2021

[9] [9] Gao Jiankai, Zhou Dejian. Microwave circuit interconnect manufacture technology[J]. Modern Surface Mounting Technology Infmation, 2005, 3(5): 3437

[10] [10] Xiao Pei. Study on modeling calculation method f the electromagic interference of interconnection cable in electromechanical equipment[D]. Chengdu: University of Electronic Science Technology of China, 2019

[11] Lin Sen. Application of crosstalk and immunity simulation in vehicle[J]. Automobile Applied Technology, 46, 35-38,109(2021).

[12] Wang Quandi, An Zongyu, Zheng Yali, . Electromagnetic compatibility optimization design for switching power supply used in electric vehicle[J]. Transactions of China Electrotechnical Society, 29, 225-231(2014).

[13] Wang Kunbo, Lu Hongmin, Chen Chongchong, et al. Modeling of system-level conducted EMI of the high-voltage electric drive system in electric vehicles[J]. IEEE Transactions on Electromagnetic Compatibility, 64, 741-749(2022).

[14] Revol B, Roudet J, Schanen J L, et al. EMI study of three-phase inverter-fed motor drives[J]. IEEE Transactions on Industry Applications, 47, 223-231(2011).

[15] Bondarenko N, Zhai Li, Xu Bingjie, et al. A measurement-based model of the electromagnetic emissions from a power inverter[J]. IEEE Transactions on Power Electronics, 30, 5522-5531(2015).

[16] [16] Xiong Ying, Li Xiaojian, Li Yan, et al. A highfrequency mot model constructed based on vect fitting method[C]Proceedings of 2019 Joint International Symposium on Electromagic Compatibility, Sappo AsiaPacific International Symposium on Electromagic Compatibility. 2019: 191194.

[17] Xiong Ying, Li Xiaojian, Zhou Wei, . Broadband electromagnetic compatibility modeling for three-phase synchronous motor of armored vehicle[J]. Acta Armamentarii, 43, 1467-1477(2022).