[1] [1] Kruth J P, Levy G, Klocke F, et al. Consolidation phenomena in laser and powder-bed based layered manufacturing[J]. CIRP Annals - Manufacturing Technology, 2007, 56(2): 730-759.

[2] [2] Kruth J P, Mercelis P, van Vaerenbergh J, et al. Binding mechanisms in selective laser sintering and selective laser melting[J]. Rapid Prototyping Journal, 2005, 11(1): 26-36.

[3] [3] Meiners W, Wissenbach K, Gasser A. Selective laser sintering at melting temperature: US6215093[P]. 2001-10-04.

[4] [4] Wang D, Yang Y, Zhang M, et al. Study on SLM fabrication of precision metal parts with overhanging structures[C]. IEEE, 2013: 222-225.

[5] [5] Lu Jianbin, Yang Yongqiang, Wang Di, et al. Analysis of affecting factors of overhanging surface quality by selective laser melting[J]. Laser Technology, 2011, 35(2): 148-151

[6] [6] Calignano F. Design optimization of supports for overhanging structures in aluminum and titanium alloys by selective laser melting[J]. Materials & Design, 2014, 64(9): 203-213.

[7] [7] Hussein A, Hao L, Yan C, et al. Advanced lattice support structures for metal additive manufacturing[J]. Journal of Materials Processing Technology, 2013, 213(7): 1019-1026.

[8] [8] Kruth J, Mercelis P, van Vaerenbergh J, et al. Binding mechanisms in selective laser sintering and selective laser melting[J]. Rapid Prototyping Journal, 1995, 11(1): 26-36.

[9] [9] Kruth J, Vandenbroucke B, van Vaerenbergh J, et al. Benchmarking of different SLS/SLM processes as rapid manufacturing techniques[C]. Proceedings of the International Conference Polymers & Moulds Innovations (PMI), 2005: 1-7.

[10] [10] Cloots M, Spierings A B, Wegener K. Assessing new support minimizing strategies for the additive manufacturing technology SLM[C]. Proceedings of the Solid Freeform Fabrication Symposium, 2013: 631-643.

[11] [11] Yang Yongqiang, Lu Jianbin, Wang Di, et al. A study of 316L stainless steel non-horizontal overhanging surface in selective laser melting[J]. Materials Science and Technology, 2011, 19(6): 94-99.

[12] [12] Lott P, Schleifenbaum H, Meiners W, et al. Design of an optical system for the in situ process monitoring of selective laser melting (SLM)[J]. Physics Procedia, 2011, 12(1): 683-690.

[13] [13] Khan M, Sheikh N A, Ali L, et al. Numerical simulation of meltpool instability in the selective laser melting (SLM) process[J]. Lasers in Engineering, 2014, 28: 319-336.

[14] [14] Alkahari M R, Furumoto T, Ueda T, et al. Melt pool and single track formation in selective laser sintering/selective laser melting[C]. Advanced Materials Research, 2014, 933: 196-201.

[15] [15] Wen S, Li S, Wei Q, et al. Effect of molten pool boundaries on the mechanical properties of selective laser melting parts[J]. Journal of Materials Processing Technology, 2014, 214(11): 2660-2667.

[16] [16] Gong H J, Gu H F, Zeng K, et al. Melt pool characterization for selective laser melting of Ti-6Al-4V pre-alloyed powder[C]. 25th Annual International Solid Freeform Fabrication Symposium, 2014: 1-4.

[17] [17] Scharowsky T, Osmanlic F, Singer R F, et al. Melt pool dynamics during selective electron beam melting[J]. Applied Physics A, 2014, 114(4): 1303-1307.

[18] [18] Craeghs T, Bechmann F, Berumen S, et al. Feedback control of layerwise laser melting using optical sensors[J]. Physics Procedia, 2010, 5(5): 505-514.

[19] [19] Thombansen U, Abels P. Process observation in selective laser melting (SLM)[C]. SPIE, 2015, 9356: 93560R.

[20] [20] Zhang Kai, Liu Tingting, Zhang Changdong, et al. Study on deformation behavior in selective laser melting based on the analysis of the melt pool data[J]. Chinese J Lasers, 2015, 42(9): 0903007.