[1] Bilisik K, Kaya G Y, Ozdemir H et al. Applications of glass fibers in 3D preform composites[M]. Sglavo V M. Advances in glass science and technology(2018).

[2] Badie M A, Mahdi E, Hamouda A M S. An investigation into hybrid carbon/glass fiber reinforced epoxy composite automotive drive shaft[J]. Materials & Design, 32, 1485-1500(2011).

[3] Çelik Y H, Türkan C. Investigation of mechanical characteristics of GFRP composites produced from chopped glass fiber and application of Taguchi methods to turning operations[J]. SN Applied Sciences, 2, 849(2020).

[4] Morampudi P, Namala K K, Gajjela Y K et al. Review on glass fiber reinforced polymer composites[J]. Materials Today: Proceedings, 43, 314-319(2021).

[5] Liu D F, Tang Y J, Cong W L. A review of mechanical drilling for composite laminates[J]. Composite Structures, 94, 1265-1279(2012).

[6] Kavad B V, Pandey A B, Tadavi M V et al. A review paper on effects of drilling on glass fiber reinforced plastic[J]. Procedia Technology, 14, 457-464(2014).

[7] Demirsöz R, Yaşar N, Korkmaz M E et al. Evaluation of the mechanical properties and drilling of glass bead/fiber-reinforced polyamide 66 (PA66)-based hybrid polymer composites[J]. Materials, 15, 2765(2022).

[8] Domingo R, de Agustina B, Ayllón J. Study of drilled holes after a cryogenic machining in glass fiber-reinforced composites[J]. Applied Sciences, 12, 10275(2022).

[9] Deepak D, Ashwin Pai K. Study on abrasive water jet drilling for graphite filled glass/epoxy laminates[J]. Journal of Mechanical Engineering and Sciences, 13, 5126-5136(2019).

[10] Kumar G, Rangappa S M, Siengchin S et al. A review of recent advancements in drilling of fiber-reinforced polymer composites[J]. Composites Part C: Open Access, 9, 100312(2022).

[11] Chaichanawong J, Thongchuea C, Areerat S. Effect of moisture on the mechanical properties of glass fiber reinforced polyamide composites[J]. Advanced Powder Technology, 27, 898-902(2016).

[12] Nuryanta M I, Sentanuhady J, Muflikhun M A. Moisture absorption behavior of hybrid composite laminates consist of natural and glass fiber[J]. Materials Today: Proceedings, 66, 2924-2928(2022).

[13] Padmanabham G, Bathe R. Laser materials processing for industrial applications[J]. Proceedings of the National Academy of Sciences, India Section A: Physical Sciences, 88, 359-374(2018).

[14] Miyamoto Y. Direct treatment of interaction between laser-field and electrons for simulating laser processing of metals[J]. Scientific Reports, 11, 14626(2021).

[15] Tamrin K F, Sheikh N A, Sapuan S M. Laser drilling of composite material: a review[M]. Abdullah A B, Sapuan S M. Hole-making and drilling technology for composites, 89-100(2019).

[16] Bhaskar V, Kumar D, Singh K K. Laser processing of glass fiber reinforced composite material: a review[J]. Australian Journal of Mechanical Engineering, 17, 95-108(2019).

[17] Nath A K. Laser drilling of metallic and nonmetallic substrates[M]. Hashmi S. Comprehensive materials processing, 115-175(2014).

[18] Pattanayak S, Panda S. Laser beam micro drilling: a review[J]. Lasers in Manufacturing and Materials Processing, 5, 366-394(2018).

[19] McNally C A, Folkes J, Pashby I R. Laser drilling of cooling holes in aeroengines: state of the art and future challenges[J]. Materials Science and Technology, 20, 805-813(2004).

[20] Fan Z J, Sun X M, Mei X S et al. Enhanced molten salt resistance by sidewall pores repair during fs laser drilling of a thermal barrier-coated superalloy[J]. Materials, 12, 1905(2019).

[21] Wang M L, Yang L J, Zhang S et al. Experimental investigation on the spiral trepanning of K24 superalloy with femtosecond laser[J]. Optics & Laser Technology, 101, 284-290(2018).

[22] Sun X M, Dong X, Wang K D et al. Experimental investigation on thermal effects in picosecond laser drilling of thermal barrier coated In718[J]. Optics & Laser Technology, 113, 150-158(2019).

[23] Yan Y Z, Ji L F, Bao Y et al. An experimental and numerical study on laser percussion drilling of thick-section alumina[J]. Journal of Materials Processing Technology, 212, 1257-1270(2012).

[24] Tao N R, Chen G Y, Yu T Y et al. Dual-beam laser drilling process for thick carbon fiber reinforced plastic composites plates[J]. Journal of Materials Processing Technology, 281, 116590(2020).

[25] Chao H, Malte W, Arnold G. Recast-free helical drilling of fused silica using SHG picosecond laser pulses[J]. Journal of Laser Micro, 15, 158-163(2020).

[26] Jahns D, Kaszemeikat T, Mueller N et al. Laser trepanning of stainless steel[J]. Physics Procedia, 41, 630-635(2013).

[27] Uchtmann H, He C, Gillner A. High precision and high aspect ratio laser drilling: challenges and solutions[J]. Proceedings of SPIE, 9741, 974106(2016).

[28] Jiwhan N, Jaehoon L, Jeong S et al. Trepanning optical system using tilting focus lens for laser drilling process[J]. Journal of Laser Micro, 4, 239-244(2009).

[29] Romoli L, Vallini R. Experimental study on the development of a micro-drilling cycle using ultrashort laser pulses[J]. Optics and Lasers in Engineering, 78, 121-131(2016).

[30] Zhu Q C, Fan P X, Li N et al. Femtosecond-laser sharp shaping of millimeter-scale geometries with vertical sidewalls[J]. International Journal of Extreme Manufacturing, 3, 045001(2021).

[31] Sonner C, Rabe M. Scanning head with integrated beam position sensor and adjustment arrangement for an off-line adjustment[P].

[32] Martin H, Dmitry B, Markus G. Scan head as part of a laser drilling and cutting device[P].