[1] Glodež S, Klemenc J, Zupanič F et al. High-cycle fatigue and fracture behaviours of SLM AlSi10Mg alloy[J]. Transactions of Nonferrous Metals Society of China, 30, 2577-2589(2020).

[2] Buchanan C, Gardner L. Metal 3D printing in construction: a review of methods, research, applications, opportunities and challenges[J]. Engineering Structures, 180, 332-348(2019).

[3] Zhang J L, Song B, Wei Q S et al. A review of selective laser melting of aluminum alloys: processing, microstructure, property and developing trends[J]. Journal of Materials Science & Technology, 35, 270-284(2019).

[4] Wu J, Wang X Q, Wang W et al. Microstructure and strength of selectively laser melted AlSi10Mg[J]. Acta Materialia, 117, 311-320(2016).

[5] Fu J K, Liu H J, Zhao J B et al. Characteristics and elimination method of dense porosity defects in laser melting deposition connection region of AlSi10Mg formed with selected laser melting[J]. Chinese Journal of Lasers, 50, 0402017(2023).

[6] Buchbinder D, Meiners W, Pirch N et al. Investigation on reducing distortion by preheating during manufacture of aluminum components using selective laser melting[J]. Journal of Laser Applications, 26, 012004(2014).

[7] Louvis E, Fox P, Sutcliffe C J. Selective laser melting of aluminium components[J]. Journal of Materials Processing Technology, 211, 275-284(2011).

[8] Liu Y, Wu Z C, Liu W S et al. Densification mechanism of laser powder deposition AlSi10Mg alloy[J]. The Chinese Journal of Nonferrous Metals, 32, 1900-1910(2022).

[9] Chen K Y, Xu L M, Gan J et al. Effects of laser power on microstructure and mechanical properties of selective laser melted AlSi10Mg[J]. Laser & Optoelectronics Progress, 58, 1314001(2021).

[10] Körner C, Attar E, Heinl P. Mesoscopic simulation of selective beam melting processes[J]. Journal of Materials Processing Technology, 211, 978-987(2011).

[11] Khairallah S A, Anderson A. Mesoscopic simulation model of selective laser melting of stainless steel powder[J]. Journal of Materials Processing Technology, 214, 2627-2636(2014).

[12] Roberts I A, Wang C J, Esterlein R et al. A three-dimensional finite element analysis of the temperature field during laser melting of metal powders in additive layer manufacturing[J]. International Journal of Machine Tools and Manufacture, 49, 916-923(2009).

[13] Yang P Y, Zhang F, Huang C et al. Numerical simulation of laser selective melting based on SPH method[J]. Scientia Sinica: Physica, Mechanica & Astronomica, 52, 64-77(2022).

[14] Shrestha S, Chou K. A build surface study of powder-bed electron beam additive manufacturing by 3D thermo-fluid simulation and white-light interferometry[J]. International Journal of Machine Tools and Manufacture, 121, 37-49(2017).

[15] Tang C, Tan J L, Wong C H. A numerical investigation on the physical mechanisms of single track defects in selective laser melting[J]. International Journal of Heat and Mass Transfer, 126, 957-968(2018).

[16] Klassen A, Scharowsky T, Körner C. Evaporation model for beam based additive manufacturing using free surface lattice Boltzmann methods[J]. Journal of Physics D: Applied Physics, 47, 275303(2014).

[17] Wang L, Yan W T. Thermoelectric magnetohydrodynamic model for laser-based metal additive manufacturing[J]. Physical Review Applied, 15, 064051(2021).

[18] Yan T Q, Chen B Q, Tang P J et al. Effect of layer thickness on forming quality and efficiency of AlSi10Mg alloy fabricated by selective laser melting[J]. Chinese Journal of Lasers, 48, 1002106(2021).