[6] [6] NI Z L, WANG S Y, ZHENG X C, et al. Application of geopolymer in synchronous grouting for reusing of the shield muck in silty clay layer[J]. Construction and Building Materials, 2024, 419: 135345.

[10] [10] DYCK B, WATERS D J, ST-ONGE M R, et al. Muscovite dehydration melting: reaction mechanisms, microstructures, and implications for anatexis[J]. Journal of Metamorphic Geology, 2020, 38(1): 29-52.

[11] [11] JIANG T, LI G H, QIU G Z, et al. Thermal activation and alkali dissolution of silicon from illite[J]. Applied Clay Science, 2008, 40(1): 81-89.

[12] [12] XU X Q, BAO S X, ZHANG Y M, et al. Role of particle fineness and reactive silicon-aluminum ratio in mechanical properties and microstructure of geopolymers[J]. Construction and Building Materials, 2021, 313: 12548.

[13] [13] LUO Y P, BAO S X, ZHANG Y M. Preparation of one-part geopolymeric precursors using vanadium tailing by thermal activation[J]. Journal of the American Ceramic Society, 2020, 103(2): 779-783.

[14] [14] QURESHI M N, GHOSH S. Effect of Si/Al ratio on engineering properties of alkali-activated GGBS pastes[J]. Green Materials, 2014, 2(3): 123-131.

[15] [15] SHI C J, KRIVENKO P V, ROY D. Alkali-activated cements and concretes［M］. Abingdon, UK: Taylor & Francis, 2006.

[18] [18] CHEESEMAN C R, MAKINDE A, BETHANIS S. Properties of lightweight aggregate produced by rapid sintering of incinerator bottom ash[J]. Resources, Conservation and Recycling, 2005, 43(2): 147-162.

[19] [19] LI Y D, WU D F, ZHANG J P, et al. Measurement and statistics of single pellet mechanical strength of differently shaped catalysts[J]. Powder Technology, 2000, 113(1/2): 176-184.

[20] [20] BAO S X, QIN L, ZHANG Y M, et al. A combined calcination method for activating mixed shale residue and red mud for preparation of geopolymer[J]. Construction and Building Materials, 2021, 297: 123789.

[21] [21] LLOYD R R, PROVIS J L, VAN DEVENTER J S J. Pore solution composition and alkali diffusion in inorganic polymer cement[J]. Cement and Concrete Research, 2010, 40(9): 1386-1392.

[22] [22] PUERTAS F, VARGA C, ALONSO M M. Rheology of alkali-activated slag pastes. Effect of the nature and concentration of the activating solution[J]. Cement and Concrete Composites, 2014, 53: 279-288.

[23] [23] NASIR M, JOHARI M A M, ADESINA A, et al. Evolution of room-cured alkali-activated silicomanganese fume-based green mortar designed using Taguchi method[J]. Construction and Building Materials, 2021, 307: 124970.

[24] [24] LIU Z, WANG J X, JIANG Q K, et al. A green route to sustainable alkali-activated materials by heat and chemical activation of lithium slag[J]. Journal of Cleaner Production, 2019, 225: 1184-1193.

[25] [25] CHEN B J, PANG L F, ZHOU Z B, et al. Study on the activation mechanism and hydration properties of gold tailings activated by mechanical-chemical-thermal coupling[J]. Journal of Building Engineering, 2022, 48: 104014.

[26] [26] BERNAL S A, PROVIS J L, ROSE V, et al. Evolution of binder structure in sodium silicate-activated slag-metakaolin blends[J]. Cement and Concrete Composites, 2011, 33(1): 46-54.

[27] [27] TANGSTAD M. Phase transformation in quartz at elevated temperatures[J]. Aspects in Mining & Mineral Science, 2021, 6(1): 691-699.

[28] [28] ISHWARYA G, SINGH B, DESHWAL S, et al. Effect of sodium carbonate/sodium silicate activator on the rheology, geopolymerization and strength of fly ash/slag geopolymer pastes[J]. Cement and Concrete Composites, 2019, 97: 226-238.