Fig. 1. Typical hysteresis loop of the magnetic switch cores

Fig. 2. Schematic and typical output waveforms of the magnetic compression network under serial connection

Fig. 3. Schematic and typical output waveforms of the magnetic compression network under parallel connection

Fig. 4. Picture of magnetic pulse compressor

Fig. 5. Schematic of the solid-state transient intense field test platform

Fig. 6. Model of saturable pulse transformer

Fig. 7. Voltage and current waveform on the capacitor

Fig. 8. Model and verified experimental results of the magnetic switch

Fig. 9. Saturation process of the lamination in the magnetic core

Fig. 10. Energy consumption in a working circle of the magnetic core

Fig. 11. Radial and longitudinal interlamination electric field distribution in the magnetic core

Fig. 12. Model and results of the magnetic switch circuit modulating pulse forming networks

Fig. 13. Voltage on the magnetic switch and the circuit on the load under three structure (t_{sat_in_S1} and t_{sat_out_S1} are the saturation time of the innermost and the outermost lamination, respectively. The others can be seen in a same way)

Fig. 14. Solid-state high-power pulse generator based on magnetic switches

Fig. 15. Typical application for HPM driver

Fig. 16. Circuit and simulation results with electromagnetic coupling of synchronization with two magnetic switches

Fig. 17. Experimental results of synchronization with two magnetic switches under different circuit parameters