[1] Zhu Y Y, Tang H B, Li Z et al. Solidification behavior and grain morphology of laser additive manufacturing titanium alloys[J]. Journal of Alloys and Compounds, 777, 712-716(2019).

[2] Yang G, Wang B, Qin L et al. Microstructure and properties of TC4 titanium alloy by laser deposition and wire & arc additive manufacturing[J]. Rare Metals, 42, 903-908(2018).

[3] Cai X Y, Hu J Q, Cheng Z H et al. Selective laser melting technology applied into aircraft air inlet protective grilling[J]. Laser & Optoelectronics Progress, 58, 1714007(2021).

[4] Ruan X Q, Lin X, Huang C P et al. Ultrasonic nondestructive testing of hole type defects in laser solid forming TC4 alloy[J]. Chinese Journal of Lasers, 42, 1203001(2015).

[5] Zhan Y, Zhang E D, Ge Y M et al. Residual stress in laser welding of TC4 titanium alloy based on ultrasonic laser technology[J]. Applied Sciences, 8, 1997(2018).

[6] Weng F, Chen C Z, Yu H J. Research status of laser cladding on titanium and its alloys: a review[J]. Materials & Design, 58, 412-425(2014).

[7] Wang H M. Materials’ fundamental issues of laser additive manufacturing for high-performance large metallic components[J]. Acta Aeronautica et Astronautica Sinica, 35, 2690-2698(2014).

[8] Ahmed T, Rack H J. Phase transformations during cooling in α+β titanium alloys[J]. Materials Science and Engineering: A, 243, 206-211(1998).

[9] Kelly S M[D]. Thermal and microstructure modeling of metal deposition processes with application to Ti-6Al-4V, 76-81(2004).

[10] Chesnutt J C, Rhodes C G, Williams J C. Relationship between mechanical properties, microstructure, and fracture topography in α+β[M]. Fractography-microscopic cracking processes, 99-138(1976).

[11] Wang P Q, Wang Y Y, Wu M J et al. Effects of heat treatment on microstructure, mechanical properties, and anisotropy of laser melting deposited TC4[J]. Chinese Journal of Lasers, 48, 1002116(2021).

[12] Guo P, Zhao Y Q, Zeng W D et al. The effect of microstructure on the mechanical properties of TC4-DT titanium alloys[J]. Materials Science and Engineering: A, 563, 106-111(2013).

[13] Wang W, Xu X W, Ma R X et al. The influence of heat treatment temperature on microstructures and mechanical properties of titanium alloy fabricated by laser melting deposition[J]. Materials, 13, 4087(2020).

[14] Wang J W[D]. Characterization and numerical simulation on the microstructure of laser additive manufactured TC4 alloy(2016).

[15] Ma R X, Xu G J, Liu Z Q et al. Effect of normalizing temperature on microstructures and tensile properties of laser three-dimensional-printed titanium alloy[J]. Chinese Journal of Lasers, 46, 0702008(2019).

[16] Zhang H W, Zhang D L, Zhang T G et al. Microstructure and tribological properties of in situ TiC-reinforced Ti-based composite coating by laser cladding on TC4 surface[J]. Laser & Optoelectronics Progress, 58, 0114001(2021).

[17] Li J, Lin X, Qian Y H et al. Study on microstructure and property of laser solid forming TC4 titanium alloy[J]. Chinese Journal of Lasers, 41, 1103010(2014).

[18] Olakanmi E O, Cochrane R F, Dalgarno K W. A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: processing, microstructure, and properties[J]. Progress in Materials Science, 74, 401-477(2015).

[19] Feng X T, Gu H, Zhou S F et al. Microstructure and electrochemical corrosion behavior of TC4 titanium alloy cladding layer prepared with powder feeding laser additive manufacturing[J]. Chinese Journal of Lasers, 46, 0302003(2019).

[20] Wang T, Zhu Y Y, Zhang S Q et al. Grain morphology evolution behavior of titanium alloy components during laser melting deposition additive manufacturing[J]. Journal of Alloys and Compounds, 632, 505-513(2015).

[21] Xiao Z N, Liu T T, Liao W H et al. Microstructure and mechanical properties of TC4 titanium alloy formed by selective laser melting after heat treatment[J]. Chinese Journal of Lasers, 44, 0902001(2017).

[22] He B B, Wu W H, Zhang L et al. Microstructural characteristic and mechanical property of Ti6Al4V alloy fabricated by selective laser melting[J]. Vacuum, 150, 79-83(2018).

[23] Dou E H, Xiao M L, Ke L D et al. Effect of heat treatment on microstructure and mechanical properties of selective-laser-melted TC11 titanium alloys[J]. Chinese Journal of Lasers, 48, 0602117(2021).

[24] Shan Q B, Liu C, Yao J et al. Effects of scanning strategy on the microstructure, properties, and residual stress of TC4 titanium alloy prepared by laser melting deposition[J]. Laser & Optoelectronics Progress, 58, 1114002(2021).

[25] Li J Y, Liu Y D, Zhou Y S et al. Effect of laser remelting on quality and mechanical properties of selective laser melting of TC4[J]. Laser & Optoelectronics Progress, 59, 0514006(2022).

[26] Katzarov I, Malinov S, Sha W. Finite element modeling of the morphology of β to α phase transformation in Ti-6Al-4V alloy[J]. Metallurgical and Materials Transactions A, 33, 1027-1040(2002).

[27] Jin N, Yan Z Y, Wang Y W et al. Effects of heat treatment on microstructure and mechanical properties of selective laser melted Ti-6Al-4V lattice materials[J]. International Journal of Mechanical Sciences, 190, 106042(2021).

[28] Wang H, Zhang T G, Wang T. Β phase transformation behavior of TC4 laser cladding on Ti811 surface[J]. Heat Treatment of Metals, 44, 167-171(2019).

[29] Zhou Y[M]. Materials analysis methods(2020).

[30] Wu S Q, Lu Y J, Gan Y L et al. Microstructural evolution and microhardness of a selective-laser-melted Ti-6Al-4V alloy after post heat treatments[J]. Journal of Alloys and Compounds, 672, 643-652(2016).

[31] Li X N[M]. Principles and methods in materials microstructure analysis(2014).

[32] Zhang C X[M]. Miniature test method for mechanical properties of metals(1984).

[33] Tao J, Yao Z J, Xue F[M]. Materials science fundamentals(2018).

[34] Shi H F, Ren X[M]. Material mechanical properties(2015).