Journals Articles Conferences News About CLP
Submit a paper Email Alert
Search
Search
Articles
Journals
News
Advanced Search
Top Searches
2D MaterialsTransformation opticsQuantum PhotonicsSmall lasersSemiconductor UV PhotonicsSupersymmetric microring laser arrays

Chinese Journal of Lasers, Volume. 51, Issue 20, 2002308(2024)

Effects of SLM Process and Cyclic Heat Treatment on Microstructure and Hardness of Mn-30%Cu Alloy

Yihui Zhang1, Tongbo Wei1, Chenyu Su1, Jingjing Yang1、*, and Zemin Wang2
Author Affiliations
  • 1The Institute of Technological Sciences, Wuhan University, Wuhan 430072, Hubei , China
  • 2Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan 430074, Hubei , China
    • show less
    AbstractGet PDF(in Chinese)
    Figures&Tables (22)
    Equations (0)
    References (52)
    Tools
    Paper Information
    Topics
    References(52)

    [1] Umetsu R Y, Xu X, Kainuma R. NiMn-based metamagnetic shape memory alloys[J]. Scripta Materialia, 116, 1-6(2016).

    [2] Mohd Jani J, Leary M, Subic A et al. A review of shape memory alloy research, applications and opportunities[J]. Materials & Design, 56, 1078-1113(2014).

    [3] Leo D, Weddle C, Naganathan G et al[M]. Vehicular applications of smart material systems(1998).

    [4] Stoeckel D. Shape memory actuators for automotive applications[J]. Materials & Design, 11, 302-307(1990).

    [5] Bil C, Massey K, Abdullah E J. Wing morphing control with shape memory alloy actuators[J]. Journal of Intelligent Material Systems and Structures, 24, 879-898(2013).

    [6] Hartl D J, Lagoudas D C. Aerospace applications of shape memory alloys[J]. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 221, 535-552(2007).

    [7] Wang W J, Xiang Y, Yu J F et al. Development and prospect of smart materials and structures for aerospace sensing systems and applications[J]. Sensors, 23, 1545(2023).

    [8] Morgan N B. Medical shape memory alloy applications: the market and its products[J]. Materials Science and Engineering: A, 378, 16-23(2004).

    [9] Sreekumar M, Nagarajan T, Singaperumal M et al. Critical review of current trends in shape memory alloy actuators for intelligent robots[J]. Industrial Robot, 34, 285-294(2007).

    [10] An X, Cui Y F, Sun H et al. Active-cooling-in-the-loop controller design and implementation for an SMA-driven soft robotic tentacle[J]. IEEE Transactions on Robotics, 39, 2325-2341(2023).

    [11] Khoo Z X, Liu Y, An J et al. A review of selective laser melted NiTi shape memory alloy[J]. Materials, 11, 519(2018).

    [12] Elahinia M H, Hashemi M, Tabesh M et al. Manufacturing and processing of NiTi implants: a review[J]. Progress in Materials Science, 57, 911-946(2012).

    [13] Patoor E, Lagoudas D C, Entchev P B et al. Shape memory alloys, Part I: general properties and modeling of single crystals[J]. Mechanics of Materials, 38, 391-429(2006).

    [14] Chen Y C, Molnárová O, Tyc O et al. Recoverability of large strains and deformation twinning in martensite during tensile deformation of NiTi shape memory alloy polycrystals[J]. Acta Materialia, 180, 243-259(2019).

    [15] Mazzer E M, da Silva M R, Gargarella P. Revisiting Cu-based shape memory alloys: recent developments and new perspectives[J]. Journal of Materials Research, 37, 162-182(2022).

    [16] Huang W. On the selection of shape memory alloys for actuators[J]. Materials & Design, 23, 11-19(2002).

    [17] Yang J J, Zhao C Y, Liang H L et al. Spinodal decomposition and martensitic transformation of the high manganese Mn‒xCu alloys fabricated by additive manufacturing[J]. Applied Materials Today, 25, 101170(2021).

    [18] Wei L, Li Q F, Zhang X L et al. Remarkable improvement in damping capacity of M2052 alloy by step-cooling treatment[J]. Materials Research Express, 8, 016526(2021).

    [19] Li D, Liu W B, Li N et al. Remarkable improvement of damping capacity of Mn-20Cu-5Ni-2Fe (at%) alloy by zinc element addition[J]. Advanced Engineering Materials, 19, 1700437(2017).

    [20] Zhong Z Y, Liu W B, Li N et al. Mn segregation dependence of damping capacity of as-cast M2052 alloy[J]. Materials Science and Engineering: A, 660, 97-101(2016).

    [21] Zhang S, Guo X P, Tang Y et al. A comparative study on microstructure and damping capacity of Mn-Cu based alloys with dendrite and equiaxial grain[J]. Vacuum, 168, 108814(2019).

    [22] Moraru E, Stoica A M, Donțu O et al. Mechanical and surface characteristics of selective laser melting-manufactured dental prostheses in different processing stages[J]. Materials, 16, 6141(2023).

    [23] Zilio G, Borges D G, Mortean M V V et al. Characterization of compact heat exchangers manufactured by laser powder bed fusion technology[J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45, 393(2023).

    [24] Pirinu A, Primo T, Del Prete A et al. Mechanical behaviour of AlSi10Mg lattice structures manufactured by the Selective Laser Melting (SLM)[J]. The International Journal of Advanced Manufacturing Technology, 124, 1651-1680(2023).

    [25] Xuan L, Zhang Y H, Peng S Y et al. Optimal simulation design for weight reduction of periodic titanium alloy space structures[J]. Journal of Mechanical Science and Technology, 37, 667-685(2023).

    [26] Ma C H, Wang C J, Shen T et al. Properties of M2052 Mn-Cu alloy powder prepared by VIGA method and its SLM prints[J]. Heat Treatment of Metals, 45, 140-147(2020).

    [27] Jia H L, Sun H, Wang H Z et al. Scanning strategy in selective laser melting (SLM): a review[J]. The International Journal of Advanced Manufacturing Technology, 113, 2413-2435(2021).

    [28] Chen X Y, Li H, Chen Q Y et al. Recent progress in laser additive manufacturing using copper-chromium-zirconium alloys: formation, microstructure, and comprehensive properties (invited)[J]. Chinese Journal of Lasers, 51, 0402302(2024).

    [29] Zhang A, Wu W P, Jiang P et al. Microstructural characterization and mechanical properties of 316L stainless steel parts prepared by laser powder bed fusion (L‑PBF) additive manufacturing[J]. Chinese Journal of Lasers, 51, 1202303(2024).

    [30] Zhang B, Li Y T, Bai Q. Defect formation mechanisms in selective laser melting: a review[J]. Chinese Journal of Mechanical Engineering, 30, 515-527(2017).

    [31] Liu Y T, Liang B, Ye Z G et al. Microstructure and mechanical properties of Mn-Cu based damping alloy fabricated by laser melting deposition[J]. Journal of Physics: Conference Series, 2338, 012051(2022).

    [32] Eskandari Sabzi H, Rivera-Díaz-Del-Castillo P E J. Defect prevention in selective laser melting components: compositional and process effects[J]. Materials, 12, 3791(2019).

    [33] Zhao C Y, Yang J J, Li G Q et al. Laser powder bed fusion of the Mn-Cu alloys: printability, microstructure, and mechanical properties[J]. Journal of Alloys and Compounds, 899, 163385(2022).

    [34] Zhang P L, Tan J, Tian Y T et al. Research progress on selective laser melting (SLM) of bulk metallic glasses (BMGs): a review[J]. The International Journal of Advanced Manufacturing Technology, 118, 2017-2057(2022).

    [35] Blackford B, Zak G, Kim I Y. The effect of scan path on thermal gradient during selective laser melting[J]. The International Journal of Advanced Manufacturing Technology, 110, 1261-1274(2020).

    [36] Zhang H, Xu W, Xu Y J et al. The thermal-mechanical behavior of WTaMoNb high-entropy alloy via selective laser melting (SLM): experiment and simulation[J]. The International Journal of Advanced Manufacturing Technology, 96, 461-474(2018).

    [37] Liu J, To A C. Quantitative texture prediction of epitaxial columnar grains in additive manufacturing using selective laser melting[J]. Additive Manufacturing, 16, 58-64(2017).

    [38] Li C, Liu Z Y, Fang X Y et al. Residual stress in metal additive manufacturing[J]. Procedia CIRP, 71, 348-353(2018).

    [39] Yan J Z, Li N, Fu X et al. The strengthening effect of spinodal decomposition and twinning structure in MnCu-based alloy[J]. Materials Science and Engineering: A, 618, 205-209(2014).

    [40] Feng X T, Li J M, Geng S et al. Effect of heat treatment on low-cycle fatigue properties of selective laser melted IN718 at room temperature[J]. Chinese Journal of Lasers, 50, 1602301(2023).

    [41] Liu W B, Li N, Zhong Z Y et al. Novel cast-aged MnCuNiFeZnAl alloy with good damping capacity and high usage temperature toward engineering application[J]. Materials & Design, 106, 45-50(2016).

    [42] Kościelna A, Szkliniarz W. Effect of cyclic heat treatment parameters on the grain refinement of Ti-48Al-2Cr-2Nb alloy[J]. Materials Characterization, 60, 1158-1162(2009).

    [43] Saha A, Mondal D K, Maity J. Effect of cyclic heat treatment on microstructure and mechanical properties of 0.6wt% carbon steel[J]. Materials Science and Engineering: A, 527, 4001-4007(2010).

    [44] Omori T, Iwaizako H, Kainuma R. Abnormal grain growth induced by cyclic heat treatment in Fe-Mn-Al-Ni superelastic alloy[J]. Materials & Design, 101, 263-269(2016).

    [45] Aboulkhair N T, Everitt N M, Ashcroft I et al. Reducing porosity in AlSi10Mg parts processed by selective laser melting[J]. Additive Manufacturing, 1, 77-86(2014).

    [46] Vilaro T, Colin C, Bartout J D. As-fabricated and heat-treated microstructures of the Ti-6Al-4V alloy processed by selective laser melting[J]. Metallurgical and Materials Transactions A, 42, 3190-3199(2011).

    [47] Haberland C, Elahinia M, Walker J M et al. On the development of high quality NiTi shape memory and pseudoelastic parts by additive manufacturing[J]. Smart Material Structures, 23, 104002(2014).

    [48] Yin F X, Ohsawa Y, Sato A et al. Phase decomposition of the γ phase in a Mn-30at.% Cu alloy during aging[J]. Acta Materialia, 48, 1273-1282(2000).

    [49] Zhang S, Guo X P, Tang Y et al. Microstructure and properties of Mn-Cu-based damping alloys prepared by ball milling and hot-press sintering[J]. Journal of Materials Engineering and Performance, 28, 2641-2648(2019).

    [50] Novikov V Y. Microstructure evolution during grain growth in materials with disperse particles[J]. Materials Letters, 68, 413-415(2012).

    [51] Omori T, Kusama T, Kawata S et al. Abnormal grain growth induced by cyclic heat treatment[J]. Science, 341, 1500-1502(2013).

    [52] Fukuhara M, Yin F X, Ohsawa Y et al. High-damping properties of Mn-Cu sintered alloys[J]. Materials Science and Engineering: A, 442, 439-443(2006).

    Tools

    Get Citation

    Copy Citation Text

    Yihui Zhang, Tongbo Wei, Chenyu Su, Jingjing Yang, Zemin Wang. Effects of SLM Process and Cyclic Heat Treatment on Microstructure and Hardness of Mn-30%Cu Alloy[J]. Chinese Journal of Lasers, 2024, 51(20): 2002308

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Set citation alerts for article
    Save article for my favorites
    Paper Information

    Category: Laser Additive Manufacturing

    Received: Dec. 11, 2023

    Accepted: Apr. 2, 2024

    Published Online: Oct. 14, 2024

    The Author Email: Yang Jingjing (jjyang0803@whu.edu.cn)

    DOI:10.3788/CJL231497

    CSTR:32183.14.CJL231497

    Topics

    laser devices and laser physics
    Lasers and Laser Optics
    Laser physics
    laser manufacturing
    Instrumentation, Measurement and Metrology