[1] ZHANG X X, ZHU D B, LIANG J S. Progress on hydrothermal stability of dental zirconia ceramics[J]. J. Inorg. Mater, 759-768(2020).

[2] LV H D, BAO J X, RUAN F et al. Preparation and properties of black Ti-doped zirconia ceramics[J]. J. Mater. Res. Technol, 6201-6208(2020).

[3] SANI E, SCITI D, CAPIANI C et al. Colored zirconia with high absorbance and solar selectivity[J]. Scr. Mater, 147-151(2020).

[4] LAGANOVSKA K, OLSTEINS D, SMITS K et al. Formation of translucent nanostructured zirconia ceramics[J]. J. Eur. Ceram. Soc, 6641-6648(2021).

[5] LEI L W, FU Z Y, WANG H et al. Transparent yttria stabilized zirconia from glycine-nitrate process by spark plasma sintering[J]. Ceram. Int, 23-28(2012).

[6] IKESUE A[M], 348(2021).

[7] BEJUGAMA S, CHAMEETTACHAL S, PATI F et al. In vitro cellular response and hydrothermal aging of two-step sintered Nb₂O₅ doped ceria stabilized zirconia ceramics[J]. Ceram. Int, 1594-1601(2021).

[8] WOOD D L, NASSAU K. Refractive index of cubic zirconia stabilized with yttria[J]. Appl. Opt, 2978-2981(1982).

[9] TIAN T, XU J Y, ZHAN Z G et al. Study on the spectral characteristics of emerald-like cubic zirconia crystal[J]. J. Synth. Cryst, 581-586(2015).

[10] DASHA A, KIMB B N, KLIMKEC J et al. Transparent tetragonal-cubic zirconia composite ceramics densified by spark plasma sintering and hot isostatic pressing[J]. J. Eur. Ceram. Soc, 1428-1435(2019).

[11] ZHANG H B, KIM B N, MORITA K et al. Optimization of high-pressure sintering of transparent zirconia with nano-sized grains[J]. J. Alloys Compd, 196-199(2010).

[12] ZHANG H B, KIM B N, MORITA K et al. Optical properties and microstructure of nanocrystalline cubic zirconia prepared by high-pressure spark plasma sintering[J]. J. Am. Ceram. Soc, 2981-2986(2011).

[13] TIAN F, CHEN C, LIU Y et al. Fabrication of Nd:YAG transparent ceramics from co-precipitated powders by vacuum pre- sintering and HIP post-treatment[J]. Opt. Mater, 109728(2020).

[14] TSUKUMA K. Transparent titania-yttria-zirconia ceramics[J]. J. Mater. Sci. Lett, 1143-1144(1986).

[15] TSUKUMA K, YAMASHITA I, KUSUNOSE T. Transparent 8mol% Y₂O₃-ZrO₂ (8Y) ceramics[J]. J. Am. Ceram. Soc, 813-818(2010).

[16] PEUCHERT U, OKANO Y, MENKE Y et al. Transparent cubic-ZrO₂ ceramics for application as optical lenses[J]. J. Eur. Ceram. Soc, 283-291(2009).

[17] LIU Q, CHEN P H, JIANG N et al. Fabrication and characterizations of 8.7mol% Y₂O₃-ZrO₂ transparent ceramics using co-precipitated nanopowders[J]. Scr. Mater, 98-101(2019).

[18] LUO J M, CAO Z C, DENG L P et al. Preparation and luminescence property of Ho³⁺/Yb³⁺:8YSZ nanopowders[J]. J. Synth. Cryst, 1902-1906(2017).

[19] HUANG X Y, LIU Y M, LIU Y et al. Fabrication and characterizations of Yb:YAG transparent ceramics using alcohol- water co-precipitation method[J]. J. Inorg. Mater, 217-224(2021).

[20] LI X Y, SNETKOV I L, YAKOVLEV A et al. Fabrication and performance evaluation of novel transparent ceramics RE:Tb₃Ga₅O₁₂(RE=Pr, Tm, Dy) toward magneto-optical application[J]. J. Adv. Ceram, 271-278(2021).

[21] LIU Z Y, TOCI G, PIRRI A et al. Fabrication, microstructures, and optical properties of Yb:Lu₂O₃ laser ceramics from co-precipitated nano-powders[J]. J. Adv. Ceram, 674-682(2020).

[22] CHEN P H, LIU Q, LI X Y et al. Influence of terminal pH value on co-precipitated nanopowders for yttria-stabilized ZrO₂ transparent ceramics[J]. Opt. Mater, 109475(2019).

[23] LV H D, BAO J X, QI S Y et al. Optical and mechanical properties of purple zirconia ceramics[J]. J. Asian Ceram. Soc, 306-311(2019).

[24] RӦMER H, LUTHER K D, ASSMUS W. Coloured zirconia[J]. Cryst. Res. Technol, 787-794(1994).

[25] LV H D, BAO J X, CHAO L M et al. Development mechanism of Ce-doped red zirconia ceramics prepared by a high-temperature reduction method[J]. J. Alloys Compd, 931-939(2019).

[26] LEE D Y, KIM D J, SONG Y S, Chromaticity. hydrothermal stability, and mechanical properties of t-ZrO₂/Al₂O₃ composites doped with yttrium, niobium, and ferric oxides[J]. J. Mater. Sci. Eng. A, 1-7(2000).

[27] HOLZA L, MACIASB J, VITORINOB N et al. Effect of Fe₂O₃ doping on colour and mechanical properties of Y-TZP ceramics[J]. Ceram. Int, 17962-17971(2018).

[28] JOVANÍ M, FORTUÑO-MORTE M, BELTRÁN-MIR H et al. Environmental-friendly red-orange ceramic pigment based on Pr and Fe co-doped Y₂Zr₂O₇[J]. J. Eur. Ceram. Soc, 2210-2217(2018).

[29] WILLEMS E, ZHANG F, VAN MEERBEEK B et al. Iron oxide colouring of highly-translucent 3Y-TZP ceramics for dental restorations[J]. J. Eur. Ceram. Soc, 499-507(2019).

[30] SALEHI S, FATHI M H. Fabrication and characterization of Sol-Gel derived hydroxyapatite/zirconia composite nanopowders with various yttria contents[J]. Ceram. Int, 1659-1667(2010).

[31] SU S, LIU Q, HU Z W et al. A simple way to prepare Co:MgAl₂O₄ transparent ceramics for saturable absorber[J]. J. Alloys Compd, 1288-1294(2019).

[32] CHEN P H, LIU Q, FENG Y G et al. Transparent Y_0.16Zr_0.84O_1.92 ceramics sintered from co-precipitated nanopowder[J]. Opt. Mater, 100(2020).

[33] NIKL M, LAGUTA V V, VEDDA A. Complex oxide scintillators: material defects and scintillation performance[J]. Phys. Stat. Sol, 1701-1722(2008).