[1] Kobayashi A, Nagayama K. Microstructure and solidification process of Fe-Cu immiscible alloy by using containerless process[J]. Journal of the Japan Institute of Metals, 81, 251-256(2017). http://ci.nii.ac.jp/naid/130005611863

[2] Li S, Liu F, Yang W. Comparison of dendrite and dispersive structure in rapidly solidified Cu-Co immiscible alloy with different heat flow modes[J]. Transactions of Nonferrous Metals Society of China, 27, 227-233(2017). http://www.en.cnki.com.cn/Article_en/CJFDTotal-ZYSY201701026.htm

[3] Wang Z M, Sun Z P, Wang X L et al. Effects of element addition on liquid phase separation of Bi-Ga immiscible alloy: Characterization by electrical resistivity and coordination tendency[J]. Materials & Design, 114, 111-115(2017). http://www.sciencedirect.com/science/article/pii/S0264127516313466

[4] Zhang R F, Kong X F, Wang H T et al. An informatics guided classification of miscible and immiscible binary alloy systems[J]. Scientific Reports, 7, 9577(2017). http://www.nature.com/articles/s41598-017-09704-1

[5] Zhang J T, Cui X C, Wang Y H. Liquid phase separation in immiscible Cu-Fe alloys[J]. International Journal of Cast Metals Research, 31, 87-92(2018). http://www.tandfonline.com/doi/abs/10.1080/13640461.2017.1367527

[6] Lu W Q, Zhang S G, Zhang W et al. A full view of the segregation evolution in Al-Bi immiscible alloy[J]. Metallurgical & Materials Transactions A, 48, 2701-2705(2017). http://link.springer.com/10.1007/s11661-017-4082-1

[7] Wang W L, Li Z Q, Wei B. Macrosegregation pattern and microstructure feature of ternary Fe-Sn-Si immiscible alloy solidified under free fall condition[J]. Acta Materialia, 59, 5482-5493(2011). http://www.sciencedirect.com/science/article/pii/S1359645411003521

[8] Nakagawa Y. Liquid immiscibility in copper-iron and copper-cobalt systems in the supercooled state[J]. Acta Metallurgica, 6, 704-711(1958). http://www.sciencedirect.com/science/article/pii/0001616058900610

[9] Dai F P, Wang W L, Ruan Y et al. Liquid phase separation and rapid dendritic growth of undercooled ternary Fe60Co20Cu20 alloy[J]. Applied Physics A, 124, 20(2017). http://link.springer.com/10.1007/s00339-017-1403-6

[10] Kharanzhevskiy E V. Separation in liquid and the formation of supersaturated solid solutions in Fe-Cu alloys upon rapid laser melting[J]. Physics of Metals and Metallography, 117, 889-895(2016). http://link.springer.com/article/10.1134/S0031918X16070097

[11] Shokuhfar A[C]. Ghassemi S H M S, Vaezi M R. Microstructure evaluation of solid-solution in Fe-Cu immiscible alloy system. Defect & Diffusion Forum, 273/274/275/276, 622-625(2008).

[12] He J, Zhao J Z, Ratke L. Solidification microstructure and dynamics of metastable phase transformation in undercooled liquid Cu-Fe alloys[J]. Acta Materialia, 54, 1749-1757(2006). http://www.sciencedirect.com/science/article/pii/S1359645406000036

[13] He J, Zhao J Z. Microstructure evolution in a rapidly solidified Cu85Fe15 alloy undercooled into the metastable miscibility gap[J]. Journal of Materials Science and Technology, 21, 759-762(2005). http://d.wanfangdata.com.cn/Periodical/clkxjsxb-e200505030

[14] Lu Y[J]. He Y Z. Liquid phase separation behaviors in Cu-Fe alloy coatings synthesized by laser cladding. Materials Science Forum, 654/655/656, 1864-1867(2010).

[15] Munitz A. Liquid separation effects in Fe-Cu alloys solidified under different cooling rates[J]. Metallurgical Transactions B, 18, 565-575(1987). http://www.tandfonline.com/servlet/linkout?suffix=CIT0006&dbid=16&doi=10.1080%2F00319104.2017.1327583&key=10.1007%2FBF02654269

[16] Shi R P, Wang C P, Wheeler D et al. Formation mechanisms of self-organized core/shell and core/shell/corona microstructures in liquid droplets of immiscible alloys[J]. Acta Materialia, 61, 1229-1243(2013). http://www.sciencedirect.com/science/article/pii/S135964541200780X

[17] Lu X Y, Cao C D, Wei B. Microstructure evolution of undercooled iron-copper hypoperitectic alloy[J]. Materials Science & Engineering A, 313, 198-206(2001). http://www.sciencedirect.com/science/article/pii/S0921509301009285

[18] Zhou S F, Dai X Q, Xiong Z et al. Influence of Al addition on microstructure and properties of Cu-Fe-based coatings by laser induction hybrid rapid cladding[J]. Journal of Materials Research, 29, 865-873(2014). http://adsabs.harvard.edu/abs/2014JMatR..29..865Z

[19] Zhou S F, Wu C, Zhang T Y et al. Carbon nanotube- and Fep-reinforced copper-matrix composites by laser induction hybrid rapid cladding[J]. Scripta Materialia, 76, 25-28(2014). http://www.sciencedirect.com/science/article/pii/S1359646213006246

[20] Dai X Q, Zhou S F, Wang M F et al. Effect of substrate types on the microstructure and properties of Cu65Fe35 composite coatings by laser induction hybrid cladding[J]. Journal of Alloys & Compounds, 722, 173-182(2017). http://www.researchgate.net/publication/317424343_Effect_of_substrate_types_on_the_microstructure_and_properties_of_Cu65Fe35_composite_coatings_by_laser_induction_hybrid_cladding

[21] Zhou S F, Zhang T Y, Xiong Z et al. Investigation of Cu-Fe-based coating produced on copper alloy substrate by laser induction hybrid rapid cladding[J]. Optics & Laser Technology, 59, 131-136(2014). http://www.sciencedirect.com/science/article/pii/S0030399213004635

[22] Trapp J, Kieback B. Solid-state reactions during high-energy milling of mixed powders[J]. Acta Materialia, 61, 310-320(2013).

[23] Mojtahedi M, Goodarzi M, Aboutalebi M R et al. Investigation on the formation of Cu-Fe nano crystalline super-saturated solid solution developed by mechanical alloying[J]. Journal of Alloys & Compounds, 550, 380-388(2013). http://www.sciencedirect.com/science/article/pii/S0925838812018828

[24] Munitz A, Venkert A, Landau P et al. Microstructure and phase selection in supercooled copper alloys exhibiting metastable liquid miscibility gaps[J]. Journal of Materials Science, 47, 7955-7970(2012). http://link.springer.com/article/10.1007/s10853-012-6354-x

[25] Wang C P, Liu X J, Ohnuma I et al. Formation of immiscible alloy powders with egg-type microstructure[J]. Science, 297, 990-993(2002). http://europepmc.org/abstract/MED/12169728

[26] Zhao J Z, Ahmed T, Jiang H X et al. Solidification of immiscible alloys: A Review[J]. Acta Metallurgica Sinica, 30, 1-28(2017). http://www.cqvip.com/QK/86672X/201701/671450112.html

[27] Jackson K A, Hunt J D. Transparent compounds that freeze like metals[J]. Acta Metallurgica, 13, 1212-1215(1965). http://www.sciencedirect.com/science/article/pii/0001616065900611

[28] Xu J T, Li A, Liu D et al. Research on corrosion resistance and wear resistance of laser cladding Cr3Si/γ multi-phase coating[J]. Chinese Journal of Lasers, 43, 0303006(2016).

[29] Wang X F, Zhang Y, Qiao Y et al. Novel microstructure and properties of multicomponent CoCrCuFeNiTix alloys[J]. Intermetallics, 15, 357-362(2007). http://www.sciencedirect.com/science/article/pii/S0966979506002457