[1] [1] LE V, WANG X N, KUANG C F, et al. Axial resolution enhancement for light sheet fluorescence microscopy via using the subtraction method［J］. Optical Engineering, 2018, 57: 103107.

[2] [2] XIONG X H, ZHANG H O, WANG G L. Metal direct prototyping by using hybrid plasma deposition and milling［J］. Journal of Materials Processing Technology, 2009, 209(1): 124-130.

[3] [3] XIONG X H, ZHANG H O, WANG G L. A new method of direct metal prototyping: hybrid plasma deposition and milling［J］. Rapid Prototyping Journal, 2008, 14(1): 53-56.

[4] [4] ZHU G X, LI D C, ZHANG A F, et al. The influence of laser and powder defocusing characteristics on the surface quality in laser direct metal deposition［J］. Optics & Laser Technology, 2012, 44(2): 349-356.

[5] [5] LEE W C, WEI C C, CHUNG S C. Development of a hybrid rapid prototyping system using low-cost fused deposition modeling and five-axis machining［J］. Journal of Materials Processing Technology, 2014, 214(11): 2366-2374.

[6] [6] KARUNAKARAN K P, SURYAKUMAR S, PUSHPA V, et al.Low cost integration of additive and subtractive processes for hybrid layered manufacturing［J］. Robotics and Computer-Integrated Manufacturing, 2010, 26(5): 490-499.

[7] [7] MCNEIL J E, WARRINGTON E K. A dissociation between addition and subtraction with written calculation［J］.Neuropsychologia, 1994, 32(6): 717-728.

[8] [8] FANG C, LIU X B, PARDALOS P M, et al. A stochastic production planning problem in hybrid manufacturing and remanufacturing systems with resource capacity planning［J］. Journal of Global Optimization, 2017, 68(4): 851-878.

[9] [9] MANOGHARAN G, WYSK R, HARRYSSON O, et al. AIMS-A metal additive-hybrid manufacturing system: system architecture and attributes［J］. Procedia Manufacturing, 2015, 1: 273-286.

[10] [10] ROMBOUTS M, MAES G, HENDRIX W, et al. Surface finish after laser metal deposition［J］. Physics Procedia, 2013, 41: 810-814.

[11] [11] AZEVEDO A, ALVES SANTOS O, CUNHA R O, et al. Addition and subtraction of spin pumping voltages in magnetic hybrid structures［J］. Applied Physics Letters, 2014, 104(15): 152408.

[12] [12] DING J T, CHEN J J, CHANG C H. A new paradigm of common subexpression elimination by unification of addition and subtraction［J］. IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, 2016, 35(10): 1605-1617.

[13] [13] NARAYANAN H, SOKOLOV M, MORBIDELLI M, et al. A new generation of predictive models: The added value of hybrid models for manufacturing processes of therapeutic proteins［J］. Biotechnology and Bioengineering, 2019, 116(10): 2540-2549.

[14] [14] WANG H. Effect of process parameters on residual stress distribution during direct laser metal deposition shaping［J］. Advanced Materials Research, 2014, 989-994: 49-54.

[15] [15] LONG R S, LIU W J, XING F, et al. Numerical simulation of thermal behavior during laser metal deposition shaping［J］. Transactions of Nonferrous Metals Society of China, 2008, 18(3): 691-699.

[16] [16] ZHANG Y J, YU G, HE X L. Numerical study of thermal history in laser aided direct metal deposition process［J］. Science China Physics, Mechanics and Astronomy, 2012, 55(8): 1431-1438.