[1] [1] Weng F, Chen C, Yu H. Research status of laser cladding on titanium and its alloys: A review[J]. Mater Des, 2014, 58: 412-425.

[2] [2] Li Meiyan, Han Bin, Wang Yong, et al.. Effects of B4C and Ti contents on structure and property of laser cladding Fe-Cr-Ni-Si alloy coatings[J]. Chinese J Lasers, 2013, 40(12): 1203008.

[3] [3] Feng Shurong, Zhang Shuquan, Wang Huaming. Wear resistance of laser clad hard particles reinforced intermetallic composite coating on TA15 alloy[J]. Chinese J Lasers, 2012, 39(2): 0203002.

[4] [4] Yang Jiaoxi, Wang Zhicheng, Wang Xin, et al.. Microstructure and properties of laser cladding MoSi2 composite coating[J]. Chinese J Lasers, 2013, 40(12): 1203004.

[5] [5] Liu S, Liu Z, Wang Y, et al.. Ti-based composite coatings with gradient TiCx reinforcements on TC4 titanium alloy prepared by laser cladding[J]. Sci China Tech Sci, 2014, 57(7): 1454-1461.

[6] [6] Song Ronglu, Niu Wei, Lei Yiwen, et al.. Microstructure and frictional wear properties of laser clad in situ CrxSy/Ni composite coating [J]. Chinese J Lasers, 2013, 40(10): 1003005.

[7] [7] Guo B G, Zhou J S, Zhang S T, et al.. Microstructure and tribological properties of in situ synthesized TiN/Ti3Al intermetallic matrix composite coatings on titanium by laser cladding and laser nitriding[J]. Mater Sci Eng A, 2008, 480(1-2): 404-410.

[8] [8] Tian Y S, Zhang Q Y, Wang D Y. Study on the microstructures and properties of the boride layers laser fabricated on Ti-6Al-4V alloy[J]. J Mater Process Technol, 2009, 209(6): 2887-2891.

[9] [9] Du B S, Zou Z D, Wang X H, et al.. In situ synthesis of TiB2/Fe composite coating by laser cladding[J]. Mater Lett, 2008, 62(4-5): 689-691.

[10] [10] Zhang H, Zou Y, Zou Z D, et al.. Microstructure and properties of Fe-based composite coating by laser cladding Fe-Ti-V-Cr-CCeO2 powder[J]. Opt Laser Technol, 2015, 65: 119-125.

[11] [11] Zhang K M, Zou J X, Li J, et al.. Synthesis of Y2O3 particle enhanced Ni/TiC composite on TC4 Ti alloy by laser cladding[J]. Trans Nonferrous Met Soc China, 2012, 22(8): 1817-1823.

[12] [12] Li J N, Chen C Z, Tiziano S, et al.. A study on wear resistance and microcrack of the Ti3Al/TiAl + TiC ceramic layer deposited by laser cladding on Ti-6Al-4V alloy[J]. Appl Surf Sci, 2010, 257(5): 1550-1555.

[13] [13] Viswanathan A, Sastikumar D, Rajarajan P, et al.. Laser irradiation of AISI 316L stainless steel coated with Si3N4 and Ti[J]. Opt Laser Technol, 2007, 39(8): 1504-1513.

[14] [14] DuttaMajumdar J, Li L. Development of titanium boride (TiB) dispersed titanium (Ti) matrix composite by direct laser cladding[J]. Mater Lett, 2010, 64(9): 1010-1012.

[15] [15] Wang F, Mei J, Wu X H. Direct laser fabrication of Ti6Al4V/TiB[J]. J Mater Process Technol, 2008, 195(1-3): 321-326.

[16] [16] Lin Y C, Lin Y C, Chen Y C. Evolution of the microstructure and tribological performance of Ti-6Al-4V cladding with TiN powder [J]. Mater Des, 2012, 36: 584-589.

[17] [17] Selvan S J, Subramanian K , Nath A K, et al.. Laser boronising of Ti-6Al-4V as a result of laser alloying with pre-placed BN[J]. Mater Sci Eng A, 1999, 260(1-2): 178-187.

[18] [18] Molian P A, Hualun L. Laser cladding of Ti-6Al-4V with BN for improved wear performance[J]. Wear, 1989, 130(10): 337-352.

[19] [19] de Oliveira U, Ocelík V, De Hosson J T M. Residual stress analysis in co-based laser clad layers by laboratory X-rays and synchrotron diffraction techniques[J]. Surf Coat Technol, 2006, 201(3-4): 533-542.