[1] [1] FAROOQ F, JIN X, FAISAL JAVED M, et al. Geopolymer concrete as sustainable material: a state of the art review[J]. Construction and Building Materials, 2021, 306: 124762.

[2] [2] MADIRISHA M M, DADA O R, IKOTUN B D. Chemical fundamentals of geopolymers in sustainable construction[J]. Materials Today Sustainability, 2024, 27: 100842.

[3] [3] ZHAO J H, TONG L Y, LI B E, et al. Eco-friendly geopolymer materials: a review of performance improvement, potential application and sustainability assessment[J]. Journal of Cleaner Production, 2021, 307: 127085.

[4] [4] JIA-NI L, YUN-MING L, CHENG-YONG H, et al. Unveiling physico-mechanical and acoustical characteristics of fly ash geopolymers through the synergistic impact of density and porosity[J]. Journal of Building Engineering, 2024, 91: 109684.

[7] [7] ZHANG K, XU H, KONG X X, et al. Study on the influence mechanism of micro-mechanical properties of heterogeneous geopolymer gels[J]. Journal of Building Engineering, 2023, 76: 107164.

[8] [8] DAVIDOVITS J. Geopolymers: inorganic polymeric new materials[J]. Journal of Thermal Analysis and Calorimetry, 1991, 37(8): 1633-1656.

[10] [10] DUXSON P, MALLICOAT S W, LUKEY G C, et al. The effect of alkali and Si/Al ratio on the development of mechanical properties of metakaolin-based geopolymers[J]. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2007, 292(1): 8-20.

[11] [11] AHMED S, MENG T, TAHA M. Utilization of red mud for producing a high strength binder by composition optimization and nano strengthening[J]. Nanotechnology Reviews, 2020, 9(1): 396-409.

[12] [12] LIU J P, LI X Y, LU Y S, et al. Effects of Na/Al ratio on mechanical properties and microstructure of red mud-coal metakaolin geopolymer[J]. Construction and Building Materials, 2020, 263: 120653.

[13] [13] YEDDULA B S R, SOMASUNDARAM K. Effect of red mud proportion on the strength and microstructure of ferrosialate based geopolymer mortar[J]. Indian Journal of Engineering and Materials Sciences, 2020, 27(3): 554-563.

[19] [19] WAN Q, RAO F, SONG S X, et al. Combination formation in the reinforcement of metakaolin geopolymers with quartz sand[J]. Cement and Concrete Composites, 2017, 80: 115-122.

[22] [22] GARCA-LODEIRO I, FERNNDEZ-JIMNEZ A, BLANCO M T, et al. FTIR study of the sol-gel synthesis of cementitious gels: C-S-H and N-A-S-H[J]. Journal of Sol-Gel Science and Technology, 2008, 45(1): 63-72.

[23] [23] ZHANG Z H, WANG H, PROVIS J L, et al. Quantitative kinetic and structural analysis of geopolymers. Part 1: the activation of metakaolin with sodium hydroxide[J]. Thermochimica Acta, 2012, 539: 23-33.

[25] [25] WANG R, WANG J S, DONG T, et al. Structural and mechanical properties of geopolymers made of aluminosilicate powder with different SiO2/Al2O3 ratio: molecular dynamics simulation and microstructural experimental study[J]. Construction and Building Materials, 2020, 240: 117935.

[27] [27] BERNAL S A. Microstructural changes induced by CO2 exposure in alkali-activated slag/metakaolin pastes[J]. Frontiers in Materials, 2016, 3: 43.

[28] [28] PACHECO-TORGAL F, CASTRO-GOMES J, JALALI S. Alkali-activated binders: a review[J]. Construction and Building Materials, 2008, 22(7): 1305-1314.

[29] [29] HE H Y, LIU H L, GUO Y, et al. Alkali-excited gel structure and compositions evolution in geopolymers synthesized from the spent FCC catalyst and steel slag[J]. Journal of Materials Research and Technology, 2022, 21: 2663-2671.