[1] China Aeronautical Materials Handbook Editorial Committee,[M]. China aeronautical materials handbook: deformed superalloys, cast superalloys, 278-293(2011).

[2] Li D K[J]. A prospect of superalloy in civil applications Shanghai Steel & Iron Research, 1993, 60-65.

[3] Huang W D, Lin X. Research progress in laser solid forming of high performance metallic component[J]. Materials China, 29, 12-27(2010).

[4] DebRoy T, Wei H L, Zuback J S et al. . Additive manufacturing of metallic components-process, structure and properties[J]. Progress in Materials Science, 92, 112-224(2018).

[5] Huang W D[M]. Laser solid forming, 1-21(2007).

[6] Lin X, Huang W D. Laser additive manufacturing of high-performance metal components[J]. Scientia Sinica: Informationis, 45, 1111-1126(2015).

[7] Qin S X, Zhao R R, Zhang H B et al. Influence of long-term thermal exposure on γ'-phase of GH99 alloy[J]. Transactions of Materials and Heat Treatment, 38, 55-60(2017).

[8] Lin X, Yang H O, Chen J et al. Microstructure evolution of 316L stainless steel during laser rapid forming[J]. Acta Metallurgica Sinica, 42, 361-368(2006).

[9] Wang J F, Sun Q J, Wang H et al. Effect of location on microstructure and mechanical properties of additive layer manufactured Inconel 625 using gas tungsten arc welding[J]. Materials Science & Engineering A, 676, 395-405(2016).

[10] Hu Y L, Lin X, Yu X B et al. Effect of Ti addition on cracking and microhardness of Inconel 625 during the laser solid forming processing[J]. Journal of Alloys & Compounds, 711, 267-277(2017).

[11] Wang Z Q, Denlinger E, Michaleris P et al. Residual stress mapping in Inconel 625 fabricated through additive manufacturing: method for neutron diffraction measurements to validate thermomechanical model predictions[J]. Materials & Design, 113, 169-177(2017).

[12] Heigel J C, Michaleris P, Palmer T A. In situ monitoring and characterization of distortion during laser cladding of Inconel 625[J]. Journal of Materials Processing Technology, 220, 135-145(2015). http://www.sciencedirect.com/science/article/pii/S0924013615000023

[13] Mukherjee T, Zhang W. DebRoy T. An improved prediction of residual stresses and distortion in additive manufacturing[J]. Computational Materials Science, 126, 360-372(2017).

[14] Gan Z T, Liu H, Li S X et al. Modeling of thermal behavior and mass transport in multi-layer laser additive manufacturing of Ni-based alloy on cast iron[J]. International Journal of Heat and Mass Transfer, 111, 709-722(2017).

[15] Xia P C, Yu W F, Yu J J et al. Influence of long-term thermal exposure on γ' phase of DZ951 alloy[J]. Journal of Materials Engineering, 35, 8-11(2007).

[16] Yang Z S, Wei Y H, Song C Y et al. Antiphase domain boundary energy of γ' [Ni3(Al, Ti)] particles with various Al contents and their strengthening contribution to a Ni-base alloy GH99[J]. Acta Metallurgica Sinica, 22, 477-483(1986).