[1] YAN Changqi, CAO Xinrong[M]. Nuclear reactor engineering, 93-110(2004).

[2] ZHANG Mingqian, RAN Xiaobing, LIU Yanwu et al. CFD simulation analysis and validation for CPR1000 pressurized water reactor[J]. Nuclear Techniques, 36, 100601(2013).

[3] CHEN Guangliang. Research on CFD analysis technology of PWR core performance[D](2017).

[4] HU Chuanwei, Yanzhi E, ZOU Yang et al. Research on GPU parallelization of fluid dynamics process of molten salt reactor core[J]. Nuclear Techniques, 40, 110601(2017).

[5] Chandesris M, Serre G, Sagaut P. A macroscopic turbulence model for flow in porous media suited for channel, pipe and rod bundle flows[J]. International Journal of Heat and Mass Transfer, 49, 2739-2750(2006).

[6] Ricciardi G, Bellizzi S, Collard B et al. Modelling Pressurized Water Reactor cores in terms of porous media[J]. Journal of Fluids and Structures, 25, 112-133(2009).

[7] Viellieber M, Class A. Anisotropic porosity formulation of the coarse-grid-CFD (CGCFD)[C], 473-483(2012).

[8] Chen R H, Tian M L, Chen S et al. Three dimensional thermal hydraulic characteristic analysis of reactor core based on porous media method[J]. Annals of Nuclear Energy, 104, 178-190(2017).

[9] Liu F R, Chen X W, Li Z et al. DEM–CFD simulation of modular PB-FHR core with two-grid method[J]. Nuclear Science and Techniques, 28, 100(2017).

[10] HE Xiaojun, YANG Shihao, HU Liqiang et al. Numerical simulation of thermal hydraulic characteristics of low temperature heating reactor based on annular fuel[J]. Atomic Energy Science and Technology, 56, 1-9(2022).

[11] Hu R, Fanning T H. A momentum source model for wire-wrapped rod bundles—Concept, validation, and application[J]. Nuclear Engineering and Design, 262, 371-389(2013).

[12] Capone L, Benhamadouche S, Hassan Y A. Source terms modeling for spacer grids with mixing vanes for CFD simulations in nuclear reactors[J]. Computers & Fluids, 126, 141-152(2016).

[13] Mikuž B, Roelofs F. Low resolution modelling of mixing phenomena in PWR fuel assemblies[J]. Nuclear Engineering and Design, 360, 110504(2020).

[14] LI Xiaochang, DENG Jian, YANG Xiaolei et al. Method of simulating thermal-hydraulic behavior of fuel assembly based on virtual body force momentum source[J]. Atomic Energy Science and Technology, 55, 1276-1287(2021).

[16] Garland W J. Single phase friction factors for MNR thermal-hydraulic modelling, Technical report 1998-02[R], 1998-02.

[17] TIAN Ruifeng, MAO Xiaohui, WANG Xiaojun. Study on 3-D flow field in 5×5 rod bundles with spacer grids[J]. Nuclear Power Engineering, 29, 48-51(2008).

[18] Chen X, Du S J, Zhang Y et al. Validation of CFD analysis for rod bundle flow test with vaned spacer grids[J]. Annals of Nuclear Energy, 109, 370-379(2017).

[19] Liu C Q, Wang Y Q, Yang Y et al. New omega vortex identification method[J]. Science China Physics, Mechanics & Astronomy, 59, 1-9(2016).