[1] [1] Sezer N, Evis Z, Koc M. Additive manufacturing of biodegradable magnesium implants and scaffolds: Review of the recent advances and research trends[J]. Journal of Magnesium and Alloys, 2021, 9(2): 392-415.

[2] [2] Xu Tiancai, Yang Yan, Peng Xiaodong, et al. Overview of advancement and development trend on magnesium alloy[J]. Journal of Magnesium and Alloys, 2019, 7(3): 536-544.

[3] [3] Manakari V, Parandeg, Gupta M. Selective Laser Melting of Magnesium and Magnesium Alloy Powders: A Review[J]. Metals, 2017, 7(1): 2.

[5] [5] Witte F. Reprint of: The history of biodegradable magnesium implants: A review[J]. Acta biomaterialia, 2015, 23: S28-S40.

[6] [6] Liu Dexue, Yang Donglin, Li Xinling, et al. Mechanical properties, corrosion resistance and biocompatibilities of degradable Mg-RE alloys: A review[J]. Journal of Materials Research and Technology, 2019, 8(1): 1538-1549.

[7] [7] Luo Ying, Zhang Chao, Wang Jue. Clinical translation and challenges of biodegradable magnesium-based interference screws in ACL reconstruction[J]. Bioact Mater, 2021, 6: 3231-3243.

[8] [8] Sahebalzamani M, Ziminska M, Mccarthy H O, et al. Advancing bone tissue engineering one layer at a time: a layer-by-layer assembly approach to 3D bone scaffold materials[J]. Biomaterials Science, 2022, 10(11): 2734-2758.

[9] [9] Malladi L, Mahapatro A, Gomes A S. Fabrication of magnesium-based metallic scaffolds for bone tissue engineering[J]. Materials technology, 2018, 33(2): 173-182.

[10] [10] Loginov Y N, Koptyug A, Popov Jr V V, et al. Compression deformation and fracture behavior of additively manufactured Ti-6Al-4V cellular structures[J]. International Journal of Lightweight Materials and Manufacture, 2022, 5(1): 126-135.

[12] [12] Song Kaile, Wang Zhaohui, Lan Jing, et al. Porous structure design and mechanical behavior analysis based on TPMS for customized root analogue implant[J]. Journal of the Mechanical Behavior of Biomedical Materials, 2021, 115(1): 104222.

[13] [13] Vijayavenkataraman S, Zhang L, Zhang S, et al. Triply Periodic Minimal Surfaces Sheet Scaffolds for Tissue Engineering Applications: An Optimization Approach toward Biomimetic Scaffold Design[J]. ACS Applied Bio Materials, 2018, 1(2): 259-269.

[14] [14] Deng Biwei, Gary J. Cheng. Soap film inspired mechanical metamaterials approaching theoretical bound of stiffness across full density range[J]. Mater Horiz, 2021, 8(3): 987-996.

[16] [16] Davoodi E, Montazerian H, Esmaeilizadeh R, et al. Additively Manufactured gradient Porous Ti-6Al-4V Hip Replacement Implants Embedded with Cell - Laden gelatin Methacryloyl Hydrogels[J]. ACS Applied Materials & Interfaces, 2021, 13(19): 22110-22123.

[17] [17] Zhang Qiang, Ma Limin, Ji Xiongfa, et al. High-Strength Hydroxyapatite Scaffolds with Minimal Surface Macrostructures for Load - Bearing Bone Regeneration[J]. Advanced Functional Materials, 2022, 32(33): 2204182.

[18] [18] Li Y, Zhou J, Pavanram P, et al. Additively manufactured biodegradable porous magnesium[J]. Acta Biomaterialia, 2018, 67(1): 378-392.

[19] [19] Liu Jinge, Liu Bingchuan, Min Shuyuan, et al. Biodegradable magnesium alloy WE43 porous scaffolds fabricated by laser powder bed fusion for orthopedic applications: Process optimization, in vitro and in vivo investigation[J]. Bioactive Materials, 2022, 16(1): 301-319.

[20] [20] Hyer H, Zhou Le, Liu Qingyang, et al. High strength WE43 micro lattice structures additively manufactured by laser powder bed fusion[J]. Materialia, 2021, 16(1): 101067.

[21] [21] Li Y, Jahr H, Zhang X Y, et al. Biodegradation-affected fatigue behavior of additively manufactured porous magnesium[J]. Additive Manufacturing, 2019, 28(1): 299-311.

[22] [22] Li Muzi, Benn F, Derra T, et al. Microstructure, mechanical properties, corrosion resistance and cytocompatibility of WE43 Mg alloy scaffolds fabricated by laser powder bed fusion for biomedical applications[J]. Materials Science and Engineering: C, 2021, 119(1): 111623.

[23] [23] Qiu Na, Wan Yuheng, Shen Yijun, et al. Experimental and numerical studies on mechanical properties of TPMS structures[J]. International Journal of Mechanical Sciences, 2024, 261: 108657.

[24] [24] Such J, Klakurkov L, Man O, et al. Corrosion behaviour of WE43 magnesium alloy printed using selective laser melting in simulation body fluid solution[J]. Journal of Manufacturing Processes, 2021, 69(1): 556-566.

[25] [25] Thomas S, Medhekar N V, Frankel G S, et al. Corrosion mechanism and hydrogen evolution on Mg[J]. Current Opinion in Solid State and Materials Science, 2015, 19(2): 85-94.

[26] [26] Dong Jianhui, Lin Tao, Shao Huiping, et al. Advances in degradation behavior of biomedical magnesium alloys: A review[J]. Journal of Alloys and Compounds, 2022, 908(1): 164600.