[1] KAMAL M S, RAZZAK S A, HOSSAIN M M. Catalytic oxidation of volatile organic compounds (VOCs)-a review[J]. Atmospheric Environment, 117(2016).

[2] LI W B, WANG J X, GONG H. Catalytic combustion of VOCs on non-noble metal catalysts[J]. Catalysis Today, 81(2009).

[3] DENG H, PAN T T, ZHANG Y et al. Adsorptive removal of toluene and dichloromethane from humid exhaust on MFI, BEA and FAU zeolites: an experimental and theoretical study[J]. Chemical Engineering Journal, 124986(2020).

[4] ZHANG X D, LV X T, SHI X Y et al. Enhanced hydrophobic UiO-66 (University of Oslo 66) metal-organic framework with high capacity and selectivity for toluene capture from high humid air[J]. Journal of Colloid and Interface Science, 152(2018).

[5] BAEK S, KIM J, IHM S. Design of dual functional adsorbent/ catalyst system for the control of VOC’s by using metal-loaded hydrophobic Y-zeolites[J]. Catalysis Today, 575(2004).

[6] BENKHEDDA J, JAUBERT J N, BARTH D et al. Experimental and modeled results describing the adsorption of toluene onto activated carbon[J]. Journal of Chemical & Engineering Data, 650(2000).

[7] KARKA S, KODUKULA S, NANDURY S V et al. Polyethylenimine- modified zeolite 13X for CO₂ capture: adsorption and kinetic studies[J]. ACS OMEGA, 16441(2019).

[8] HARLICK P J E, TEZEL F H. An experimental adsorbent screening study for CO₂ removal from N₂[J]. Microporous and Mesoporous Materials, 71(2004).

[9] SHEN C M, WOREK W M. Cosorption characteristics of solid adsorbents[J]. International Journal of Heat & Mass Transfer, 2123(1994).

[10] LIU S, PENG Y, CHEN J J et al. Engineering surface functional groups on mesoporous silica: towards a humidity-resistant hydrophobic adsorbent[J]. Journal of Materials Chemistry A, 13769(2018).

[11] GUILLEMOT M, MIJOIN J, MIGNARD S et al. Adsorption of tetrachloroethylene (PCE) in gas phase on zeolites of faujasite type: Influence of water vapour and of Si/Al ratio[J]. Microporous and Mesoporous Materials, 334(2008).

[12] YIN T, MENG X, JIN L P et al. Prepared hydrophobic Y zeolite for adsorbing toluene in humid environment[J]. Microporous and Mesoporous Materials, 110327(2020).

[13] JIA L X, SUN X Y, YE X Q et al. Core-shell composites of USY@mesosilica: synthesis and application in cracking heavy molecules with high liquid yield[J]. Microporous and Mesoporous Materials, 16(2013).

[14] LI R N, XUE T S, LI Z et al. Hierarchical structure ZSM-5/ SBA-15 composite with improved hydrophobicity for adsorption- desorption behavior of toluene[J]. Chemical Engineering Journal, 124861(2020).

[15] LI R N, CHONG S J, ALTAF N et al. Synthesis of ZSM-5/siliceous zeolite composites for improvement of hydrophobic adsorption of volatile organic compounds[J]. Frontiers in chemistry, 505(2019).

[16] LIU H J, WEI K Y, LONG C. Enhancing adsorption capacities of low-concentration VOCs under humid conditions using NaY@meso-SiO₂ core-shell composite[J]. Chemical Engineering Journal, 136108(2022).

[17] MIYAMOTO M, ONO S, KUSUKAMI K et al. High water tolerance of a core-shell-structured Zeolite for CO₂adsorptive separation under wet conditions[J]. ChemSusChem, 1756(2018).

[18] LIU L Y, DU T, FANG X et al. Preparation of hydrophobic zeolite 13X@SiO₂and their adsorption properties of CO₂and H₂O[J]. Advanced Materials Research, 311(2014).

[19] LIU L Y, SINGH R, LI G et al. Synthesis of hydrophobic zeolite X@SiO₂ core-shell composites[J]. Materials Chemistry and Physics, 1144(2012).

[20] LI R N, XUE T S, BINGRE R et al. Microporous zeolite@vertically aligned Mg-Al layered double hydroxide core@shell structures with improved hydrophobicity and toluene adsorption capacity under wet conditions[J]. ACS Applied Materials & Interfaces, 34834(2018).

[21] YI H, LI Z Y, REN C Q. Introduction to the standard relative humidity table for saturated salt solutions (international recommendation)[conf-proc]. The 7th National Conference on Humidity and Moisture and the 5th Conference on Gas-Humidity Sensitivity, Huhehaote, 70(1998).

[22] LU S, LIU Q, HAN R et al. Core-shell structured Y zeolite/ hydrophobic organic polymer with improved toluene adsorption capacity under dry and wet conditions[J]. Chemical Engineering Journal, 128194(2021).

[23] LUO X, GUO J, CHANG P et al. ZSM-5@MCM-41 composite porous materials with a core-shell structure: Adjustment of mesoporous orientation basing on interfacial electrostatic interactions and their application in selective aromatics transport[J]. Separation and Purification Technology, 116516(2020).

[24] XIA H J, WANG J, CHEN G et al. One-pot synthesis of SiO₂@SiO₂ core-shell microspheres with controllable mesopore size as a new stationary phase for fast HPLC separation of alkyl benzenes and β-agonists[J]. Microchimica Acta, 125(2019).

[26] VELLINGIRI K, KUMAR P, DEEP A et al. Metal-organic frameworks for the adsorption of gaseous toluene under ambient temperature and pressure[J]. Chemical Engineering Journal, 1116(2017).

[27] KRAUS M, TROMMLER U, HOLZER F et al. Competing adsorption of toluene and water on various zeolites[J]. Chemical Engineering Journal, 356(2018).

[28] LEE K M, KIM N S, NUMAN M et al. Post synthetic modification of zeolite internal surface for sustainable capture of volatile organic compounds under humid conditions[J]. ACS Applied Materials & Interfaces, 53925(2021).

[29] JACOBS J H, DEERING C E, LESAGE K L et al. Rapid cycling thermal swing adsorption apparatus: commissioning and data analyses for water adsorption of zeolites 4A and 13X over 2000 cycles[J]. Industrial & Engineering Chemistry Research, 7487(2021).

[30] FISCHER F, LUTZ W, BUHL J C et al. Insights into the hydrothermal stability of zeolite 13X[J]. Microporous and Mesoporous Materials, 262: 258(2018).