[1] [1] ZANG C C, WANG Y Z, ZHANG Y D. Effects of laser cladding process on cladding layer qualities of nickel-base alloy［J］. Advanced Materials Research, 2014, 1028:90-95.

[2] [2] ZHANG R Zh,LI L J,TANG M Q,et al. Research progress of laser cladding technology ［J］. Heat Treatment Technology and Equipment, 2017,38(3):7-11(in Chinese).

[3] [3] SHENG Y D. The fundamental investigation on laser cladding process［D］. Shanghai:Shanghai Maritime Univeristy,2006:7-15;30-40(in Chinese).

[4] [4] TOYSERKANI E, KHAJEPOUR A, CORBIN S F. Laser cladding［M］. Boca Raton, USA: CRC Press, 2004:35-58.

[5] [5] YOO H C. Recent study of thermal spray for green automotive industry ［J］. Journal of Welding and Joining, 2014, 32(3): 43-52.

[6] [6] ZHENG G Ch. Study on laser cladding surface coating modification and remanufacture of Cr12MoV steel［D］. Changsha: Hunan University,2016:5-14(in Chinese).

[7] [7] DENG D, CHEN R, ZHANG H. Present status and development tendency of plasma transferred arc welding［J］. Journal of Mechanical Engineering, 2013, 49(7): 106-112.

[8] [8] LIU J, YU H, CHEN C, et al. Research and development status of laser cladding on magnesium alloys: A review［J］. Optics & Lasers in Engineering, 2017, 93(7): 195-210.

[9] [9] ZHENG B J, WEI J Y, JIANG Y H, et al.Wear property of NiCoFeCrTi high entropy alloy coating by laser cladding［J］. Laser Technology, 2016,40(3):432-435(in Chinese).

[10] [10] YANG H Y. Preparation and properties of WC particle reinforced composite coating［D］. Hefei: Hefei Polytechnic University,2011:13-20(in Chinese).

[11] [11] AL-SAYED ALI S R, HUSSEIN A H A, NOFAL A A M S, et al. Laser powder cladding of Ti-6Al-4V α/β alloy［J］. Materials, 2017, 10(10): 1178.

[12] [12] SONG X H, ZOU Y F, XING J K, et al.Comparison between laser cladding Fe-based and Ni-based alloy coatings on 35CrMo［J］. Laser Technology, 2015,39(1):39-45(in Chinese).

[13] [13] LUO Sh X. Study on ceramic particles reinforced Fe-based composite coating produced by laser claddig on 5CrNiMo steel［D］. Ji’nan: Shandong University, 2016:34-48(in Chinese).

[14] [14] CAI W W, SHAO Sh, WU L J. Microstructure and properties of Fe-based B4C wear-resistant coating on 16Mn steel［J］. Surface Technology, 2018,47(2):130-135(in Chinese).

[15] [15] GAO D Q, WANG R, CHEN W, et al. Research progress of improving material properties by laser cladding［J］. Hot Working Technology, 2017,46(12):14-18(in Chinese).

[16] [16] ZHOU D D, SUN R L. Effect of laser scanning rate on microstructure and properties of nickel-based h-BN composite coating［J］. Heat Treatment of Metals, 2017, 42(4):167-171(in Chinese).

[17] [17] ZHANG D Q,HAO Y J,LI J H. Effects of laser cladding laser parameters on Ni60A performance of cladding layer［J］. Machinery Design & Manufacture, 2017,311(1):115-118(in Chinese).

[18] [18] ZHU G X,ZHANG A F,LI D Ch. Effect of process parameters on surface smoothness in laser cladding［J］. Chinese Journal of Lasers, 2010, 37(1):296-301(in Chinese).

[19] [19] ZHANG W. Influence of scanning speed on microstructure and hardness during laser cladding high-Cr cast iron［J］. Applied Mechanics & Materials, 2013, 395/396(7):1127-1131.

[20] [20] OCELK V, FURáR I, HOSSON J T M D. Microstructure and properties of laser clad coatings studied by orientation imaging microscopy［J］. Acta Materialia, 2010, 58(20):6763-6772.

[21] [21] CHEN Sh G, ZHANG X M, ZHENG Q Ch, et al. Effect of CeO2 on microstructure and properties of Ni60 alloy coating by laser cladding［J］. Laser Technology, 2017,41(6):904-908(in Chinese).