[1] YE Q Q, CHEN Y Y, LI Y Z et al. Management of typical VOCs in air with adsorbents: status and challenges[J]. Dalton Transactions, 12169(2023).

[2] FETISOV V, GONOPOLSKY A M, DAVARDOOST H et al. Regulation and impact of VOC and CO₂ emissions on low-carbon energy systems resilient to climate change: a case study on an environmental issue in the oil and gas industry[J]. Energy Science & Engineering, 1516(2023).

[3] HE T, KONG X J, BIAN Z X et al. Trace removal of benzene vapour using double-walled metal-dipyrazolate frameworks[J]. Nature Materials, 689(2022).

[4] GAN G Q, FAN S Y, LI X Y et al. Adsorption and membrane separation for removal and recovery of volatile organic compounds[J]. Journal of Environmental Sciences, 96(2023).

[5] WANG H C, GUO H, ZHAO Y X et al. Thermodynamic analysis of a petroleum volatile organic compounds (VOCs) condensation recovery system combined with mixed-refrigerant refrigeration[J]. International Journal of Refrigeration, 23(2020).

[6] WU X M, ZHANG Q G, SOYEKWO F et al. Pervaporation removal of volatile organic compounds from aqueous solutions using the highly permeable PIM-1 membrane[J]. AIChE Journal, 842(2016).

[7] YANG Y, ZHAO S H, CUI L F et al. Recent advancement and future challenges of photothermal catalysis for VOCs elimination: from catalyst design to applications[J]. Green Energy & Environment, 654(2023).

[8] QIAN X F, YUE D T, TIAN Z Y et al. Carbon quantum dots decorated Bi₂WO₆ nanocomposite with enhanced photocatalytic oxidation activity for VOCs[J]. Applied Catalysis B: Environmental, 16(2016).

[9] QIN L B, XU Z, LIU L et al. In-situ biodegradation of volatile organic compounds in landfill by sewage sludge modified waste-char[J]. Waste Management, 317(2020).

[10] SUGIMOTO I, NAGAOKA T, SEYAMA M et al. Classification and characterization of atmospheric VOCs based on sorption/ desorption behaviors of plasma polymer films[J]. Sensors and Actuators B: Chemical, 53(2007).

[11] YANG K, XUE F, SUN Q et al. Adsorption of volatile organic compounds by metal-organic frameworks MOF-177[J]. Journal of Environmental Chemical Engineering, 713(2013).

[12] WANG Y, XIE J, WU Y C et al. A magnetic metal-organic framework as a new sorbent for solid-phase extraction of copper(II), and its determination by electrothermal AAS.[J]. Microchimica Acta, 949(2014).

[13] XIE L H, LIU X M, HE T et al. Metal-organic frameworks for the capture of trace aromatic volatile organic compounds[J]. Chem, 1911(2018).

[14] YE Z C, YAO J C, ZHENG W et al. The preparation and adsorption performance of Co-doped MIL-101(Cr) for low-concentration C₃F₈[J]. Chemical Engineering Science, 119302(2023).

[15] LLEWELLYN P L, BOURRELLY S, SERRE C et al. High uptakes of CO₂ and CH₄ in mesoporous metal-organic frameworks MIL-100 and MIL-101[J]. Langmuir, 7245(2008).

[16] CAO J W, LI Y X, MA X B et al. Constructing binuclear sites to modulate the charge distribution of MIL-101 for enhanced toluene adsorption performance: experimental and theoretical studies[J]. Separation and Purification Technology, 129400(2025).

[17] SHAO P, KUANG X Y, DING L P et al. Can CO₂ molecule adsorb effectively on Al-doped boron nitride single walled nanotube?[J]. Applied Surface Science, 350(2013).

[18] XIA X N, XU Y Z, CHEN Y et al. Fabrication of MIL-101(Cr/Al) with flower-like morphology and its catalytic performance[J]. Applied Catalysis A: General, 138(2018).

[19] JAVANBAKHT V, RAFIEE Z. Fibrous polyester sponge modified with carboxymethyl cellulose and zeolitic imidazolate frameworks for methylene blue dye removal in batch and continuous adsorption processes[J]. Journal of Molecular Structure, 131552(2022).

[20] AWADALLAH-F A, ELKHATAT A M, AL-MUHTASEB S A. Impact of synthesis conditions on meso- and macropore structures of resorcinol-formaldehyde xerogels[J]. Journal of Materials Science, 7760(2011).

[21] WICKENHEISSER M, HERBST A, TANNERT R et al. Hierarchical MOF-xerogel monolith composites from embedding MIL-100(Fe, Cr) and MIL-101(Cr) in resorcinol-formaldehyde xerogels for water adsorption applications[J]. Microporous and Mesoporous Materials, 143(2015).

[22] FENG L J, LI J L, OU Y Y et al. Study on the Pb(II) adsorption mechanism on acid-modified ceramsite made from sewage sludge and industrial solid wastes[J]. International Journal of Applied Ceramic Technology, 3389(2024).

[23] TIWARI S, SALEEM M, MISHRA A et al. Structural, optical, and dielectric studies on Sr-doped biferroic YCrO₃[J]. Journal of Superconductivity and Novel Magnetism, 2521(2019).

[24] WANG Y Q, FU X, PAN T T et al. Stable effect on MIL-101(Cr) with Cu²⁺ for the toluene adsorption[J]. Journal of Solid State Chemistry, 123633(2022).

[25] ZHENG Y, CHU F C, ZHANG B et al. Ultrahigh adsorption capacities of carbon tetrachloride on MIL-101 and MIL-101/graphene oxide composites[J]. Microporous and Mesoporous Materials, 71(2018).

[26] ZHANG F F, SHANG H, WANG L et al. Substituent-induced electron-transfer strategy for selective adsorption of N₂ in MIL-101(Cr)-X metal-organic frameworks[J]. ACS Applied Materials & Interfaces, 2146(2022).

[27] CAO E P, ZHENG Y H, ZHANG H et al. In-situ regenerable Cu/Zeolite adsorbent with excellent H₂S adsorption capacity for blast furnace gas[J]. Separation and Purification Technology, 126305(2024).

[28] WANG H Y, WANG B D, LI J H et al. Adsorption equilibrium and thermodynamics of acetaldehyde/acetone on activated carbon[J]. Separation and Purification Technology, 535(2019).

[29] KONGGIDINATA M I, CHAO B, LIAN Q Y et al. Equilibrium, kinetic and thermodynamic studies for adsorption of BTEX onto ordered mesoporous carbon (OMC)[J]. Journal of Hazardous Materials, 249(2017).