[1] KOYANAGI T, TERRANI K, HARRISON S et al. Additive manufacturing of silicon carbide for nuclear applications. Journal of Nuclear Materials, 543, 152577(2021).

[2] WANG X, GAO X, ZHANG Z et al. Advances in modifications and high-temperature applications of silicon carbide ceramic matrix composites in aerospace: a focused review. Journal of the European Ceramic Society, 41(2021).

[3] SINGH S, RATHI K, PAL K. Synthesis, characterization of graphene oxide wrapped silicon carbide for excellent mechanical and damping performance for aerospace application. Journal of Alloys and Compounds, 740, 436(2018).

[6] WANG Y, CHENG Y, CHEN Y et al. Lattice-structured SiC ceramics obtained via 3D printing, gel casting, and gaseous silicon infiltration sintering. Ceramics International, 48(2022).

[7] HE R, ZHOU N, ZHANG K et al. Progress and challenges towards additive manufacturing of SiC ceramic. Journal of Advanced Ceramics, 10(2021).

[8] BAI X, DING G, ZHANG K et al. Stereolithography additive manufacturing and sintering approaches of SiC ceramics. Open Ceramics, 5, 100046(2021).

[9] HASSANIN H, ESSA K, ELSHAER A et al. Micro-fabrication of ceramics: additive manufacturing and conventional technologies. Journal of Advanced Ceramics, 10(2021).

[10] WANG K, YIN J, CHEN X et al. Microstructure and properties of liquid phase sintered SiC ceramics fabricated via selective laser printing and precursor impregnation and pyrolysis. Ceramics International, 50(2024).

[11] WANG K, YIN J, CHEN X et al. Advances on direct selective laser printing of ceramics: an overview. Journal of Alloys and Compounds, 975, 172821(2024).

[12] CHEN X, YIN J, LIU X et al. Effect of laser power on mechanical properties of SiC composites rapidly fabricated by selective laser sintering and direct liquid silicon infiltration. Ceramics International, 48(2022).

[13] CHEN X, YIN J, HUANG L et al. Microstructural tailoring, mechanical and thermal properties of SiC composites fabricated by selective laser sintering and reactive melt infiltration. Journal of Advanced Ceramics, 12(2023).

[14] LI H, LIU Y, LIU Y et al. Influence of sintering temperature and CVI time on mechanical properties of 3D-printed alumina ceramics. Materials Letters, 285, 129096(2021).

[15] JIN L, ZHANG K, XU T et al. The fabrication and mechanical properties of SiC/SiC composites prepared by SLS combined with PIP. Ceramics International, 44(2018).

[16] ZHONG H, WANG Z, ZHOU H et al. Properties and microstructure evolution of Cf/SiC composites fabricated by polymer impregnation and pyrolysis (PIP) with liquid polycarbosilane. Ceramics International, 43(2017).

[18] GU X S, YIN J, WANG K L et al. Effect of particle grading on properties of silicon carbide ceramics by binder jetting printing. Journal of Inorganic Materials, 38(2023).

[19] XING Y Y, WU H B, LIU X J et al. Grain composition on solid- state-sintered SiC ceramics. Journal of Inorganic Materials, 33(2018).

[22] PELANCONI M, COLOMBO P, ORTONA A. Additive manufacturing of silicon carbide by selective laser sintering of PA12 powders and polymer infiltration and pyrolysis. Journal of the European Ceramic Society, 41(2021).