[1] [1] KHAN Q, REFAAT S S, ABU-RUB H, et al.Partial discharge detection and diagnosis in gas insulated switchgear: State of the art［J］.Ieee Electrical Insulation Magazine,2019, 35(4): 16-33.

[2] [2] RAYMOND W J K, ILLIAS H A, ABU BAKAR A H, et al.Partial discharge classifications: Review of recent progress［J］.Measurement,2015, 68: 164-181.

[3] [3] WANG L H, HOU K, TAN L Q.Research of GIS partial discharge type evaluation based on convolutional neural network［J］.Aip Advances,2020, 10(8)：085305.

[4] [4] MAN Y Y, ZHANG C, TANG Q H, et al. Application of ultrasonic testing method in particle detection of GIS handover test［C］//［S.l.］:International Conference on Physics, Photonics and Optical Engineering (ICPPOE),2022.

[6] [6] SIKORSKI W.Development of acoustic emission sensor optimized for partial discharge monitoring in power transformers［J］.Sensors,2019, 19(8) ：1865.

[7] [7] WANG J, CHEN M, ZHAO X, et al.Fabrication and high acoustic performance of high frequency needle ultrasound transducer with PMN-PT/Epoxy 1-3 piezoelectric composite prepared by dice and fill method［J］.Sensors and Actuators A: Physical,2021, 318: 112528.

[8] [8] PYO S, KIM J, KIM H, et al.Development of vector hydrophone using thickness-shear mode piezoelectric single crystal accelerometer［J］.Sensors and Actuators A: Physical,2018, 283: 220-227.

[9] [9] TIAN F, LIU Y, MA R, et al.Properties of PMN-PT single crystal piezoelectric material and its application in underwater acoustic transducer［J］.Applied Acoustics,2021, 175: 107827.

[10] [10] ZHANG W K, JIA H Y, GAO G P, et al.Backing layers on electroacoustic properties of the acoustic emission sensors［J］.Applied Acoustics,2019, 156: 387-393.

[11] [11] SAUSE M G R, HAMSTAD M A.Numerical modeling of existing acoustic emission sensor absolute calibration approaches［J］.Sensors and Actuators A:Physical,2018, 269: 294-307.

[12] [12] ZHANG Z, XU J, YANG L, et al.Design and comparison of PMN-PT single crystals and PZT ceramics based medical phased array ultrasonic transducer［J］.Sensors and Actuators A: Physical,2018, 283: 273-281.

[13] [13] QI H, HAN D, HOU D, et al.A novel acoustic emission sensor design and modeling method for monitoring the status of high-speed train bearings［J］.Structural Health Monitoring,2023, 22:(6) 3761-3784.

[14] [14] XIAO D G, ZHANG Z N, REN H L, et al. Calibration Principle for Acoustic Emission Sensor Sensitivity［C］//［S.l.］:2nd World Conference on Acoustic Emission (WCAE),2013: 33-45.

[15] [15] ZHANG L, YALCINKAYA H, OZEVIN D.Numerical approach to absolute calibration of piezoelectric acoustic emission sensors using multiphysics simulations［J］.Sensors and Actuators A:Physical,2017, 256: 12-23.

[16] [16] WANG Y Y, HE L B, ZHU H J, et al. Consistency of surface pulse and reciprocity calibration of piezoelectric AE sensors［C］//［S.l.］:2015 Symposium on Piezoelectricity, Acoustic Waves, and Device Applications (SPAWDA),2015: 189-192.

[17] [17] LIAO Q, HUANG P, AN Z, et al.Origin of thermal depolarization in piezoelectric ceramics［J］.Scripta Materialia,2016, 115: 14-18.