[1] X F WANG, B ZOU, L LI et al. Manufacturing of a ceramic groove part based on additive and subtractive technologies. Ceramics International, 47, 740-747(2021).

[2] Y F HU, B ZOU, H Y XING et al. Preparation of Mn-Zn ferrite ceramic using stereolithography 3D printing technology. Ceramics International, 48, 6923-6932(2022).

[3] T D NGO, A KASHANI, G IMBALZANO et al. Additive manufacturing （3D printing）：a review of materials，methods，applications and challenges. Composites Part B：Engineering, 143, 172-196(2018).

[4] A WOLF, P L ROSENDAHL, U KNAACK. Additive manufacturing of clay and ceramic building components. Automation in Construction, 133, 103956(2021).

[5] F WANG, Z LI, Y LOU et al. Stereolithographic additive manufacturing of Luneburg lens using Al2O3-based low sintering temperature ceramics for 5G MIMO antenna. Additive manufacturing, 47, 102244(2021).

[6] G ZHANG, J JIANG, H WANG et al. Continuous DLP-based ceramic 3D printing using a composite oxygen-rich film. Journal of Manufacturing Processes, 64, 341-348(2021).

[7] Q H CHEN, B ZOU, Q G LAI et al. A study on biosafety of HAP ceramic prepared by SLA-3D printing technology directly. Journal of the Mechanical Behavior of Biomedical Materials, 98, 327-335(2019).

[8] X LI, H SU, D DONG et al. Enhanced comprehensive properties of stereolithography 3D printed alumina ceramic cores with high porosities by a powder gradation design. Journal of Materials Science & Technology, 131, 264-275(2022).

[9] S A RASAKI, D XIONG, S XIONG et al. Photopolymerization-based additive manufacturing of ceramics：A systematic review. Journal of Advanced Ceramics, 10, 442-471(2021).

[11] H Y XING, B ZOU, X F WANG et al. Fabrication and characterization of SiC whiskers toughened Al2O3 paste for stereolithography 3D printing applications. Journal of Alloys and Compounds, 828, 154347(2020).

[12] J A LEWIS, J E SMAY, J STUECKER et al. Direct ink writing of three-dimensional ceramic structures. Journal of the American Ceramic Society, 89, 3599-3609(2006).

[13] H ELSAYED, P COLOMBO, E BERNARDO. Direct ink writing of wollastonite-diopsideglass-ceramic scaffolds from a silicone resin and engineered fillers. Journal of the European Ceramic Society, 37, 4187-4195(2017).

[14] E FEILDEN, E G BLANCA, F GIULIANI et al. Robocasting of structural ceramic parts with hydrogel inks. Journal of the European Ceramic Society, 36, 2525-2533(2016).

[15] B KHATRI, M FREY, A RAOUF-FAHMY et al. Development of a multi-material stereolithography 3D printing device. Micromachines, 11, 532(2020).

[16] A J LOPES, E MACDONALD, R B WICKER. Integrating stereolithography and direct print technologies for 3D structural electronics fabrication. Rapid Prototyping Journal, 18, 129-143(2012).

[17] J RAYNAUD, V PATELOUP, M BERNARD et al. Hybridization of additive manufacturing processes to build ceramic/metal parts：Example of LTCC. Journal of the European Ceramic Society, 40, 759-767(2020).

[18] P WANG, J LI, G WANG et al. Multimaterial additive manufacturing of LTCC matrix and silver conductors for 3D ceramic electronics. Advanced Materials Technologies, 7, 2101462(2022).

[19] B OZKAN, F SAMENI, F BIANCHI et al. 3D printing ceramic cores for investment casting of turbine blades，using LCD screen printers：The mixture design and characterisation. Journal of the European Ceramic Society, 42, 658-671(2022).

[20] H Y QUAN, T ZHANG, H XU et al. Photo-curing 3D printing technique and its challenges. Bioact Mater, 5, 110-115(2020).

[21] A ZOCCA, P COLOMBO, C GOMES et al. Additive manufacturing of ceramics：issues，potentialities，and opportunities. Journal of the American Ceramic Society, 98, 1983-2001(2015).

[22] N TRAVITZKY, A BONET, B DERMEIK et al. Additive manufacturing of ceramic-based materials. Advanced Engineering Materials, 16, 729-754(2014).

[23] J DECKERS, J VLEUGELS, J KRUTH. Additive manufacturing of ceramics：a review. Journal of Ceramic Science and Technology, 5, 245-260(2014).

[24] X Y LIU, B ZOU, H Y XING et al. The preparation of ZrO2-Al2O3 composite ceramic by SLA-3D printing and sintering processing. Ceramics International, 46, 937-944(2020).

[25] Y YU, B ZOU, X WANG et al. Rheological behavior and curing deformation of paste containing 85 wt% Al2O3 ceramic during SLA-3D printing. Ceramics International, 48, 24560-24570(2022).

[26] G ZHANG, B ZOU, X WANG et al. Design，manufacturing and properties of controllable porosity of ceramic filters based on SLA-3D printing technology. Ceramics International, 49, 1009-1019(2023).

[27] J CHANG, B ZOU, X WANG et al. Preparation，characterization and coloring mechanism of 3D printed colorful ZrO2 ceramics parts. Materials Today Communications, 33, 104935(2022).

[28] Q CHEN, B ZOU, Q LAI et al. Influence of irradiation parameters on the curing and interfacial tensile strength of HAP printed part fabricated by SLA-3D printing. Journal of the European Ceramic Society, 42, 6721-6732(2022).

[29] Q CHEN, B ZOU, Q LAI et al. 3D printing and osteogenesis of loofah-like hydroxyapatite bone scaffolds. Ceramics International, 47, 20352-20361(2021).

[30] Q CHEN, B ZOU, Q LAI et al. SLA-3d printing and compressive strength of PEGDA/nHAP biomaterials. Ceramics International, 48, 30917-30926(2022).

[31] H W SUN, B ZOU, T QUAN et al. Multi-material ceramic hybrid additive manufacturing based on vat photopolymerization and material extrusion compound process. Additive Manufacturing, 97, 104627(2025).