[1] [1] Hardis R, Jessop J L P, Peters F E, et al.. Cure kinetics characterization and monitoring of an epoxy resin using DSC, Raman spectroscopy, and DEA[J]. Composites Part A: Applied Science and Manufacturing, 2013, 49: 100-108.

[2] [2] Cossins S, Connell M, Cross B, et al.. In situ near-IR cure monitoring of a model epoxy matrix composite[J]. Applied Spectroscopy, 1996, 50(7): 900-905.

[3] [3] Choi J H, Kim I Y, Lee D G. Development of the simple dielectric sensor for the cure monitoring of the high temperature composites[J]. Journal of Materials Processing Technology, 2003, 132(1-3): 168-176.

[4] [4] Liu C W, Zhao X G, Yu X H, et al.. A study of the thermal cure of new trifunctional phenylethynyl terminated imide oligomers with reduced cure temperatures[J]. Polymer Degradation and Stability, 2013, 98(1): 230-240.

[5] [5] Leprince J G, Hadis M, Shortall A C, et al.. Photoinitiator type and applicability of exposure reciprocity law in filled and unfilled photoactive resins[J]. Dental Materials, 2011, 27(2): 157-164.

[6] [6] Zhou Li, Liang Dakai, Zeng Jie, et al.. Mechanism and experimental research on performance degeneration of fiber Bragg grating affected by temperature[J]. Chinese J Lasers, 2012, 39(4): 0405007.

[7] [7] Zhou Yabin, Zeng Jie, Zhang Qianyun, et al.. Measurement of the thermal diffusivity of carbon composite by water-heat balance method[J]. Chinese J Lasers, 2013, 40(11): 1108001.

[8] [8] Wang Zhenbao, Yang Pengling, Shao Bibo, et al.. Fiber Bragg grating for simultaneous measurement of strain and temperature[J]. Laser & Optoelectronics Progress, 2013, 50(10): 100602.

[9] [9] Lu Shaowei. Damage monitoring of the double-notched carbon fiber reinforced polymers with surface bonded chirped fiber Bragg grating sensor[J]. Chinese J Lasers, 2012, 39(11): 1105004.

[10] [10] Ito Y, Minakuchi S, Mizutani T, et al.. Cure monitoring of carbon-epoxy composites by optical fiber-based distributed strain-temperature sensing system[J]. Advanced Composite Materials, 2012, 21(3): 259-271.

[11] [11] Lu Shaowei, Gao Yu, Zhang Haijun, et al.. Monitoring of the resin transfer molding process using fiber Bragg gratings sensors[J]. Polymer Materials Science and Engineering, 2013, 29(1): 119-122.

[12] [12] Lu Shaowei, Zhang Haijun, Gao Yu, et al.. Monitoring the effect of post-cure on the performance of RTM processing composites[J]. Journal of Optoelectronics·Laser, 2012, 23(6): 1120-1125.

[13] [13] Kim H S, Yoo S H, Chang S H. In situ monitoring of the strain evolution and curing reaction of composite laminates to reduce the thermal residual stress using FBG sensor and dielectrometry[J]. Composites Part B: Engineering, 2013, 44(1): 446-452.

[14] [14] Marin E, Robert L, Triollet S, et al.. Liquid resin infusion process monitoring with superimposed fibre Bragg grating sensor[J]. Polymer Testing, 2012, 31(8): 1045-1052.

[15] [15] Park S, Park T, Han K. Real-time monitoring of composite wind turbine blades using fiber Bragg grating sensors[J]. Advanced Composite Materials, 2011, 20(1): 39-51.